Availability
Computech vacuum pressure monitor kits allow you to measure pressures from -14.7 to +30 in. of mercury. With calibration values available for inches of mercury (inHg) or pounds per square inch (psi), they work great for low-range pressures that have a tendency to go into a vacuum state, such as boost pressure. Computech vacuum pressure monitor kits include a stainless steel pressure transducer and a 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$359.95
FuelTech Pan Vacuum sensors are designed to monitor crankcase vacuum inside an engine to ensure piston rings are sealing properly in the cylinders. A correctly sealed engine is vital in achieving maximum performance. One of the best ways to ensure you're keeping that ring seal at its optimum best is with the use of a FuelTech Pan Vacuum sensor. They're made from durable materials with a 1/8 in. NPT thread size to provide accuracy.
Not Yet Reviewed
$179.00
On Sale
For your data recorder to be able to monitor an analog channel it must receive a signal that it can recognize. The Racepak Module PT2 convert the analog parameters to a standard 0-5 volt signal required by the recorder. The transducer module (combination sensor and signal conditioning modules) provides direct connection to the measured parameter, such as fuel or oil pressure. The signal conditioning module allows the connection of remote sensors, such as thermocouples or position sensors, to the data recorder.
Not Yet Reviewed
$399.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$349.95
Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.
Not Yet Reviewed
$1,699.95
—
$2,499.95
Lowdoller Motorsports push-lock boost control fitting kits provide a secure, quick, and simple way to plumb various boost and vacuum components in turbocharged and supercharged vehicles, such as wastegates, boost controllers, and blow-off valves. The "push-lock" design allows for tool-free installation by simply pushing the tubing into the fitting, which then grips the line. These types of fittings offer a significant advantage over traditional methods like rubber hoses and clamps, making the entire setup easier to connect and disconnect for maintenance or adjustments. Order the fitting kit designed for your application to plumb your vacuum/boost lines like a pro!
Not Yet Reviewed
$149.99
Racepak pressure transducer hose extensions help to minimize harmful vibrations to a pressure or vacuum sensor. These braided steel hose extensions are engineered for the harsh conditions of the racing environment. They measure 4 in. long and include 1/8 in. NPT male and female ends. Race smart--choose Racepak products!
Not Yet Reviewed
$42.95
On Sale
When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor
Not Yet Reviewed
$399.95
$219.95
Install your IQ3 dash display with ease—using one of these sleek Racepak IQ3 dash mounting panels from Racepak Data Systems. These vacuum-formed plastic mounting panels are specifically designed for IQ3 dashes and are trimmed for a precise fit to simplify your installation. Instead of numerous gauges, your IQ3 system can provide all vehicle data in one compact digital unit. These Racepak dash mounting panels are the ideal foundation and are available in a variety of finishes.
( 1 )
$262.95
On Sale
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$1,649.95
—
$2,099.95
$1,483.95
—
$1,888.95
Monitor your rides critical systems and performance with Racepaks IQ3 dash displays. IQ3 displays are completely customizable, allowing you to monitor the information you want in real time while placing info on multiple pages allows you to organize the information and avoid clutter. Racepak helps avoid the clutter associated with wiring as well by utilizing their V-Net cable system. The unique pass though wiring allows you to hook multiple sensors together in series leaving only one wire that needs run to the display or data logger. The display is powerful enough to be used as a standalone, real time gauge system or with any V-Net compatible data logger. The user can even define alarms to alert them to a problem and shift lights to maximize your performance. Take control of your racecar, hardcore offroader or street car with Racepaks IQ3 dash displays.
( 6 )
$749.95
Attention sportsman drag racers: Racepak IQ3D digital dash instruments offer a compact, all-in-one solution for data acquisition. Adding a robust, built-in data logger to the popular IQ3, the drag race versions display information on four user-definable pages—and recorded data is stored on a microSD memory card located on the face of the dash for easy access. You can record engine rpm, driveshaft rpm, oil pressure, water temperature, and battery voltage. Smarter racing; get onboard performance that could change the way you compete ... and win, with Racepak IQ3D. Racepak IQ3D drag racing digital dashes specifications include: * Programmable LED shift lights * User-defined 5-character sensor input names * Four programmable external warnings * Shielded, low-luster display for open cockpit use * Can add up to six additional V-Net channels
( 1 )
$1,799.95
If you've changed anything to higher pressure output then you'll want one of these Racepak powered pressure transducer sensors. They are available in different psi ratings, so you can choose what range best suits your application.
( 2 )
$249.95
Lowdoller Motorsports universal pressure senders provide a cost-effective alternative to higher-end sensors, making them an accessible option for adding data logging to your racing setup without significant expense. Built for demanding environments, these pressure sensors offer a broad range of versatility to monitor various fluid or gas pressures (like fuel, oil, or coolant) in vehicles and other systems. They serve as essential components for data logging to provide real-time information to an engine management system (ECU) or data logger. Select the model designed for your application needs.
Not Yet Reviewed
$72.00
Racepak IQ3 data recorders represent an entirely new concept in data logging dashes. By placing the 32-channel data logger, 512 MB memory card, GPS board, and 3-axis G-meter inside the dash, every feature of the data system is now located in one central location. This means that only one small cable will transmit the data from all the sensors to the rear of the dash. This eliminates the need for a sensor harness, greatly reducing installation time, complexity and overall weight. The programmable shift lights are protected from sunlight by a molded shield above the lights, while the low-glare LCD display is well recessed in the housing to provide viewing in all light conditions. The rear of the dash contains the connectors for the external GPS antenna and V-Net sensor cable—plus the power, ground, and engine rpm external programming button harnesses. All data is stored in a MicroSD memory card located in the front of the dash between the programmable shift lights. This design insures easy access to the memory card for data download.
( 1 )
$1,549.95
Summit Racing™ data acquisition kit and dash panel Pro Packs provide reliable, efficient, and affordable performance for today's professional and sportsman racers alike! These kits pair up a dash panel designed for perfect fitment in your specific vehicle, together with a cutting-edge digital gauge unit that monitors up to dozens of automotive parameters. Some models feature Racepak instrumentation, and others include interactive Holley controls. Order the Pro Pack assembled for your application.
Not Yet Reviewed
$1,789.90
—
$4,179.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
