Availability
Showing In Stock Items. Show All 80 Items.
Holley EFI benchtop harnesses are designed for benchtop testing and setup of HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes. They are great for ECU diagnostics that do not require a running engine, firmware updates, or 7 in. dash calibrations. The harness has pre-terminated connectors for the following sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI connectors for a Sniper main harness. Also includes a power switch for quick setup in your workspace. Power and ground flying leads need to be connected to your battery or power supply (not included). Key features: * Terminated connectors for multiple EFI inputs * Included power switch allows for a quick "install" on your test bench * Optimal for ECU diagnostic, firmware updating, and pre-configuring dash layouts * Works with HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes * Has pre-terminated connectors for these sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI main harness connectors
Not Yet Reviewed
$231.95
Racepak's AF1 single channel air fuel sensor packages are designed to be utilized with any of their V-net (canbus) Series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 V enables use with standard 12 or 16 V high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat- and water-resistant controller with integrated V-net module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0 to 5 V analog output
Not Yet Reviewed
$499.95
These Innovate LM-2 digital air/fuel ratio meter basic kits combine an air/fuel ratio meter and a full-function 32-channel data logger to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, a race carburetor, an aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The Innovate LM-2 digital air/fuel ratio meter basic kits' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. Their self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. They also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2-compatible with all fuel types * OBD-II scan tool reads/clears DTCs and logs up to 16 channels of CAN OBD-II data (cable not included) * Large, high-contrast graphics LCD * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial in and out * USB connection to your PC
( 6 )
$469.99
Innovate's LM-2 digital air/fuel ratio meters combine an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The meters' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s' self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2s also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. With the provided LM Programmer software, these analog outputs may also be configured by the user. Innovate's LM-2s are available in single wideband and dual wideband O2 configurations. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool, read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card (included) * Playback log data on screen with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
( 10 )
$555.99
—
$737.99
Collect exhaust samples accurately with Racepak air/fuel sensors. These A/F sensors come with a 13 in. pigtail cable and are compatible with either gasoline or methanol fueled engines. Gasoline application will display ratios between 9.55:1 and 20:1, while methanol will show from 4.22:1 to 8.7:1. Racepak air/fuel sensors can be used with all V-Net products, and can run on 12 to18 V battery systems.
Not Yet Reviewed
$129.95
—
$169.95
These accessories from Innovate are designed to work with your Innovate air/fuel ratio monitor. They are perfect for upgrading your current monitor or for replacing worn-out components.
( 43 )
$31.99
—
$99.99
Manufacturer Rebate
Do you ever wonder what your exact air/fuel ratio is? Well, now you can know with Innovate DB digital air/fuel ratio gauge with LC-2 kits. They feature a new, sleek design to match today's modern styles. These kits have a black face, black bezel, and are available with either blue or red LED numbers to fit your needs. Use the included LC-2 wideband controller and Bosch 5-wire oxygen sensor to complete your installation. Also included with the Innovate DB digital air/fuel ratio gauge with LC-2 kits is an oxygen sensor bung and plug, gauge mounting hardware, a CD, and a quick-start information guide.
( 35 )
$219.99
Take control of your exhaust temperatures using one of these Racepak four channel air fuel controllers. They are available for either the left or right side of the engine and feature easy plug-in connections. Sensors sold separately.
Not Yet Reviewed
$1,499.95
Innovate LM-2 dual digital air/fuel ratio meter basic kits feature the LM-2 that combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Innovate basic kits include the accessories to display your air/fuel ratio, either on the meter and/or on your PC. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * Dual Channel A/F version * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC Innovate dual basic kits include: * LM-2 meter * Bosch wide-band oxygen sensors * 8 ft. sensor cables * Cigarette lighter power adapter * USB cable for PC connection * Weld-in bung and plug kits * Manual
( 1 )
$710.99
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$349.95
$192.95
—
$349.95
AEM Electronics 6-Channel CAN sensor modules provide an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to your CD Carbon Digital dash through AEMnet CAN bus. The modules support the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash, or logger. Features include: * Two temperature (thermistor) inputs * Two dedicated 0 to 5 V analog inputs * One dedicated fuel level input (0 to 250 Ohm range) * One tachometer/coil input * Fixed CAN bus speed, header length, and base address * IP67 potted enclosure/sealed connector—dust-tight and protected against water spray * Protected inputs * 12-pin DTM-style connector and pins
Not Yet Reviewed
$189.95
AiM Sports pressure sensors are small, lightweight, but well-engineered pressure transducers—and are some of the best in the marketplace today. AiM sensors are IP67 rated, weigh only 34g, are made from stainless steel, and operate between -20 and +135 degrees C. They're designed for the detection of fluid and air pressures in demanding motorsport and automotive applications—and are ideal for high-precision data acquisition or control systems. These transducers can be installed directly onto vehicles or as part of a test stand or dyno. They offer a high level of reliability and endurance, and are protected against the high vibration, shock, and extreme temperatures found in motorsport. Their modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations. Industry standard 3-wire electrical connections allow configuration with most common ECUs and data-logging systems. Aim Sports pressure sensors are race-proven around the world and offer a reliable and cost-effective solution for data acquisition. They're available in different styles and options. Order the model best suited for your application.
( 1 )
$164.99
HalTech offers a wide range of data acquisition components, including this 12-Position Rotary Trim Module (Boost/Fuel/LGN, etc.). It includes two position decals and a matching set of Deutsch DTM 3 connectors (HT-031014).
Not Yet Reviewed
$82.00
On Sale
Racepak flow meters provide accurate flow readings for both fuel and hydraulic clutch systems. These general purpose turbine-type flow meters, when used along with DataLink's math channel capabilities, allow you to monitor the health of your fuel pump, as well as confirm the function of your fuel system timers and system lean-outs. Also offered in low-flow versions, those designated as low-flow are recommended for carbureted applications and are calibrated in lbs./hr. unless otherwise noted. Racepak flow meters are available constructed from aluminum for gasoline and nitromethane, and in stainless steel for methanol fuel.
Not Yet Reviewed
$1,399.95
$909.95
—
$1,449.95
FAST wideband O2 wiring harnesses are your connections to air/fuel monitoring. When you need gauge accessories to keep the information flowing in your XFI system, FAST wideband O2 wiring harnesses will fill your requirements.
( 1 )
$71.95
Holley EFI CAN adapter harnesses are available in several options. Offered are male to female harnesses in several lengths for Racepak and other external CAN devices, harnesses that adapt 2-pin Holley main harness CAN connectors to newer 4-pin CAN devices, and kits that directly connect Racepak Vnet/Holley to either the J1A (HP and Dominator ECUs) or J3 (Dominator ECU only) connectors. Create secure connections with genuine Holley EFI CAN adapter harnesses.
Not Yet Reviewed
$65.85
Innovate LM-2 Ultimate shop kits set you up to dial in maximum horsepower. The Ultimate shop kits are available in single or dual channel versions and include 18 ft. sensor cable, exhaust clamp, inductive clamp, and bung/plug. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
Not Yet Reviewed
$623.99
—
$765.99
Help your vehicle's engine achieve optimal performance with an assist from genuine OE Mopar Replacement oxygen sensor control modules. They feature high-quality materials and provide the proper fit, form, and function for your vehicle to restore like-new performance and safety. Order the Mopar Replacement oxygen sensor control modules specifically designed for your year/make/model application.
Not Yet Reviewed
$209.99
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$219.95
On Sale
Racepak ECU interface cables are adapter harnesses used to connect the CAN bus data stream from your existing ECU to a Racepak IQ3S (Street Dash), IQ3D (Drag Dash), or Racepak Universal CAN module. Once this CAN cable is connected and properly set up, data from the ECU is then available for use with the Racepak IQ3S, IQ3D or Racepak Universal CAN module.
Not Yet Reviewed
$99.95
Are you running rich or lean? Innovate oxygen sensors will monitor and tell you just what the facts are. These precision sensors collect and feed the data you need to aid in restoring accurate gauging your fuel mixture. They offer replacement Bosch LSU 4.2 and 4.9 sensors for their digital A/F ratio meter and digital wideband gauges. Plus, Innovate wideband systems allow the sensor to be recalibrated for the ultimate in accuracy, maximum performance, and safety!
( 25 )
$84.99
—
$109.99
Innovate LC-2 Digital Wideband Lambda O2 Controller kits are ideal for applications such as dynamometers, data acquisition systems, stand-alone ECU's, and gauges. They feature self-calibrating circuitry to compensate for changes in temperature, altitude, and sensor condition. These units include a digital input/output, and two full-programmable analog outputs. It can be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with Innovates' Modular Tuning System (MTS). Additional features include: * Patented DirectDigital™ Wideband Technology * Wideband O² Compatible with all fuel types * Ability to calibrate O² sensor for maximum accuracy * Integrated dual-color status LED (Green/Red) * Two configurable linear 0-5v analog outputs * Positive lock connectors for all connections * Innovate MTS serial in/out * Serial connection to your PC * Real-time display data on screen and/or with powerful LogWorks software
( 11 )
$178.99
Looking for a complete monitoring package? Racepak IQ3D Drag Dash bracket bundles combine their popular IQ3 Drag logger dash with the most common V-Net sensors and V-Net extension cable to meet the needs of today's bracket racers. They are compatible with a long list of ECU systems. Racepak bracket bundles include: * IQ3D Drag Dash * Wiring harness (includes 2 programming buttons) * Driveshaft sensor (Note: driveshaft collar sold separately) * Oil pressure sensor * Water temperature sensor * Carburetor fuel pressure sensor and V-Net module * Transmission temperature sensor and V-Net module * 6 ft. V-Net cable * USB programming cable * Racepak Datalink II software * MicroSD card and reader
( 2 )
$2,349.95
The new Racepak V300SD Easy Access Data Loggers include all the features and benefits of their successors, but now also include built-in pre-configured data analysis channels, enabling you to make quick decisions based on real data between rounds at the track. Equipped with a door car harness, these units are commonly used for Pro Stock, Pro Modified, Sportsman drag classes, and Land Speed. They come with DataLink software. Easy Access loggers no longer require the use of a security key, allowing you to look at your data with any laptop that has the latest version of Datalink V5 installed. * Out-of-the-Box, this system will data log: - Engine RPM - Drive Shaft RPM (Requires driveshaft collar, sold separately) - Accelerometer G-Meter - Lateral G-Meter - Battery Voltage * List of pre-configured data analysis math channels included in the DataLink V5 software: - Engine vs. Driveshaft Ratio - Clutch percentage slip - Clutch Slip Ratio - Trans Ratio - RR, LR, RF, LF Shock Velocity - Average Air/Fuel Ratio - Average Exhaust Gas Temperatures - CC's Per Turn (for Fuel Flow) - Track Time - G-Meter MPH, G-Meter Distance (Feet) - 60 ft., 330 ft., 660 ft., 1000 ft., 1320 ft. Clock Markers Features: * With sampling rates of up to 1,000 frames per second, the V300SD series of data recorders allow you to monitor up to 83 channels of sensor information * Unlocked math channels for the following calculations: Clutch Percentage Slip, Trans Ratio, Shock Velocity, Average AFR (Air/Fuel Ratio), Average EGT (Exhaust Gas Temperature), G-Meter MPH, and many more * The included SD memory card allows you to transfer your vital sensor information to your laptop quickly, getting you back in the lanes without fumbling with cables * The 83 total channels break down as follows: 72 V-Net; 4 Hard-wired Analog; 4 Hard-wired Digital; and 3 Internal Sensors (Battery Voltage, Accel/Decel G-Meter, and Lateral G-Meter)
Not Yet Reviewed
$1,749.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
