Availability
Showing In Stock Items. Show All 54 Items.
Racepak AF1 single channel air fuel sensor packages are designed to be utilized with any of Racepak's Vnet (canbus) series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 volts enables use with standard 12 volt or 16 volt high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat and water resistant controller with integrated Vnet module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0-5 Volt analog output
Not Yet Reviewed
$499.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$259.95
—
$368.95
Shock travel sensors are linear potentiometers that record the slightest amount of suspension movement. Monitoring the extension and compression of the shock absorbers aids greatly in understanding what the chassis is doing. It is a principal means of evaluating suspension movement and chassis setup. Regardless of your type of racing, Racepak shock travel sensors provide information that is frequently crucial to separating winners from the also-rans. They are usually connected through an analog port of a data recorder (sold separately) and monitored at high sample rates. An analog channel is required for each sensor; a separate sensor is required for each wheel monitored.
Not Yet Reviewed
$479.95
—
$519.95
Racepak un-programmed V-Net modules with sensors are customizable for a variety of applications. This makes them ideal whether replacing worn-out/damaged modules, or simply if you prefer your own programming for the V-Net system. The V-Net ID and sensor type parameters will not be pre-programmed on these modules. As with all V-Net modules connecting to the V-Net cable, they feature plug-and-play installation, and can be linked in any sequence. Repair or further customize your setup with Racepak un-programmed V-Net modules. Order the proper base pressure setting for your application.
Not Yet Reviewed
$329.95
FuelTech Travel sensors are designed to accurately measure suspension or body movement of your vehicle up to eight inches. They feature 5mm Heim joints for mounting, and are compatible with most ECUs, including FuelTech's Engine Control Units (sold separately). Order the FuelTech Travel sensor model in the application you need for your specific setup. Connector Pinout: --Pin 1 - Ground (Brown) --Pin 2 - Signal (Yellow) --Pin 3 - 5 V (Blue) Note: Requires a FuelTech Travel sensor connector kit (sold separately).
Not Yet Reviewed
$349.00
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
—
$399.95
Racepak non-contact infra-red temperature sensors are designed specifically for the motorsports market. These compact but rugged sensors are capable of monitoring temperature data for a variety of surfaces. The non-contact design is well-suited for stationary or moving surface temperatures, such as tire or race track surfaces. They have a 4:1 ratio focal point, e.g., when the surface being monitored is four inches away from a sensor, the focal point will be one inch in diameter.
Not Yet Reviewed
$399.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).
Not Yet Reviewed
$329.95
Computech shock travel sensors are designed for monitoring suspension travel. They are available in 4 in. or 8 in. lengths and are one of the strongest shock travel sensors on the market. Mounting is a breeze, and the information gathered through shock travel can go a long way to perfecting your setup.
Not Yet Reviewed
$399.95
FAST XFI driveshaft speed sensor kits measure driveshaft rpm to provide more accurate data for the traction control unit. Two magnets are fitted to the collar around the pinion yoke, which attaches to the driveshaft. When one of the magnets passes the pickup, it sends a signal to the XFI unit. They then use that signal to calculate both driveshaft rpm and driveshaft acceleration. As a result, these speed sensor kits provide much more precise readings, as opposed to determining driveshaft speed solely through variable engine rpm. The data they provide is perfect for drag race applications.
( 2 )
$260.95
Stack Gauges speed sensors are small, lightweight, and accurate. Designed for your integrated Stack Race Dash system, their wheel speed sensors help you to obtain speed readout by simply plugging them into the dash harness. Your speedometer can be configured for different tire sizes and to display speed in either mph or km/h. Add a performance option to your dash system--add Stack Gauges speed sensors.
Not Yet Reviewed
$275.99
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$329.95
Racepak GPS V-Net modules allow you to add a GPS sensor to any non-GPS equipped V-Net data recorder. They utilize a standard V-Net tee connector and install into the Datalink II software, providing a speed channel for analytical, display, and odometer information.
Not Yet Reviewed
$429.95
By installing Racepak wheelie bar load cells on both of your wheelie bars, you can create a record of how long and how hard the car was on the wheelie bars. In addition, you can determine if both wheelie bars are receiving equal loading and produce a visual record of how the car is reacting to a particular set-up. A V-Net module and pressure sensor (both sold separately) is attached to each load cell to monitor and graph the pressures generated in the load cells.
Not Yet Reviewed
$419.95
Lowdoller Motorsports dual-axis accelerometers are specifically designed for motorsports applications to measure critical forces experienced by a vehicle. When integrated with a data logging system, the dual-axis accelerometer provides richer, more complete data compared to a single-axis sensor. The accelerometers feature high sensitivity in the X-axis and Y-axis directions. The X-axis data from the device is essential for making acceleration and deceleration power management decisions. The Y-axis data is essential for cornering and driving related tuning. By providing specific X and Y axis data, the dual-axis accelerometers allow drivers and engineers to pinpoint areas in their vehicle's performance and calibration that can be improved, ultimately helping to gain performance.
Not Yet Reviewed
$304.99
Computech 15 psi pressure monitor kits are extremely accurate low-range pressure sensors, perfect for monitoring carbureted fuel pressure and boost psi. The pressure sensor will monitor from 0 to 15 psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
Computech 500 psi pressure monitor kits have a great wide-range pressure sensor that is still extremely accurate in low and high-pressure environments. They are typically used for oil pressure, injected fuel psi, and transmission pressure. The pressure sensor will monitor from 0 to 500 psi. Computech 500 psi pressure monitor kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
Computech 1,500 psi pressure monitor kits are great for monitoring nitrous bottle pressure, as well as brake pressure. The pressure sensor will monitor from 0 to 1,500 psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable and are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
Stack Clubman linear potentiometers provide excellent value for motorsport monitoring and measurement tasks offering sound repeatability, reliability, linearity, and environmental performance. Featuring anodized aluminum housings, IP65 sealing, self-aligning spherical bearings, and available in stroke lengths from 2 to 8 in. (50 to 200mm), these position sensors are pre-terminated for use with Stack data systems monitoring parameters, such as damper (shock) position, pedal inputs, steering angle, aerodynamic surface deflection, and actuator travel.
Not Yet Reviewed
$358.99
Stack Professional linear potentiometers are engineered to excel in the most demanding conditions in motorsports, offering excellent repeatability, reliability, linearity, and extended environmental performance. Featuring IP67 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 2 to 8 in. (50 to 200mm), these position sensors are pre-terminated for use with Stack data systems monitoring parameters, such as damper (shock) position, pedal inputs, steering angle, throttle position, aerodynamic surface deflection, and actuator travel. Select the stroke length needed for your setup.
Not Yet Reviewed
$432.99
Racepak analog transducer boxes hold up to four drop-in pressure modules. They're perfect for Pro Stock and Pro Mod type race cars. The boxes allow you to run appropriate hose to your pressure source—and are available for naturally aspirated, nitrous oxide-injected, and supercharged applications.
Not Yet Reviewed
$369.95
—
$399.95
Computech vacuum pressure monitor kits allow you to measure pressures from -14.7 to +30 in. of mercury. With calibration values available for inches of mercury (inHg) or pounds per square inch (psi), they work great for low-range pressures that have a tendency to go into a vacuum state, such as boost pressure. Computech vacuum pressure monitor kits include a stainless steel pressure transducer and a 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$359.95
Computech 100 psi pressure monitor kits are extremely accurate and will be sure to capture every little pressure change. Measuring accurately throughout the entire zero to 100 psi range, they work great for oil, boost, or fuel psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
Computech throttle position kits are designed to monitor what happens to the car down the track. Did you let off the throttle before or after the finish line? How much did you let off? How much mph did that kill? With these kits, you can finally monitor exactly what the driver did at the top end and increase your chances of reproducing successful results.
Not Yet Reviewed
$299.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
