Race Electronics Ignitions & Electrical

Racepak RPM Sensors

Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.

5.0 out of 5 stars ( 5 )

$214.95

—

$245.95

Racepak Air/Fuel Sensors

Collect exhaust samples accurately with Racepak air/fuel sensors. These A/F sensors come with a 13 in. pigtail cable and are compatible with either gasoline or methanol fueled engines. Gasoline application will display ratios between 9.55:1 and 20:1, while methanol will show from 4.22:1 to 8.7:1. Racepak air/fuel sensors can be used with all V-Net products, and can run on 12 to18 V battery systems.

Not Yet Reviewed

$132.95

—

$173.95

Racepak Powered Pressure Transducer Sensors

If you've changed anything to higher pressure output then you'll want one of these Racepak powered pressure transducer sensors. They are available in different psi ratings, so you can choose what range best suits your application.

5.0 out of 5 stars ( 2 )

$249.95

Haltech GPS Speed Input Module

Haltech offers a wide range of data acquisition components, including this GPS Speed Input Module for applications that require a digital speed signal. It also includes a GPS antenna matching male DTM-3 connector and pins. * Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU inputs, GPS update rate 10Hz, high accuracy 0.3 percent deviation, pulse compensation in tunnel, anti-GPS drift technology.

5.0 out of 5 stars ( 1 )

$130.00

AiM Sports Pressure Sensors

AiM Sports pressure sensors are small, lightweight, but well-engineered pressure transducers—and are some of the best in the marketplace today. AiM sensors are IP67 rated, weigh only 34g, are made from stainless steel, and operate between -20 and +135 degrees C. They're designed for the detection of fluid and air pressures in demanding motorsport and automotive applications—and are ideal for high-precision data acquisition or control systems. These transducers can be installed directly onto vehicles or as part of a test stand or dyno. They offer a high level of reliability and endurance, and are protected against the high vibration, shock, and extreme temperatures found in motorsport. Their modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations. Industry standard 3-wire electrical connections allow configuration with most common ECUs and data-logging systems. Aim Sports pressure sensors are race-proven around the world and offer a reliable and cost-effective solution for data acquisition. They're available in different styles and options. Order the model best suited for your application.

5.0 out of 5 stars ( 1 )

$165.00

Haltech Linear Position Sensors

Ideal for racers and most commonly used as shock travel sensors, Haltech linear position sensors can also be used to measure gearbox shaft position, differential angle, or in any application that requires linear position data. In short, these simple sensors can make your ride not just faster but also more predictable. Used as shock travel sensors, these data acquisition components can measure and log the speed and distance of your shock's compression, extension, rebound, etc. to give you an accurate picture of how the vehicle reacts to the track surface and changes. They remove the guesswork from chassis tuning. Armed with this information, you can significantly cut down on testing and adjusting, saving not just time but wear and tear on your vehicle. Linear position sensors are available in 1/2 in. and 1 in. models for 100mm through 250mm applications.

Not Yet Reviewed

$115.00

Manufacturer Rebate

Innovate Oxygen Sensors

Are you running rich or lean? Innovate oxygen sensors will monitor and tell you just what the facts are. These precision sensors collect and feed the data you need to aid in restoring accurate gauging your fuel mixture. They offer replacement Bosch LSU 4.2 and 4.9 sensors for their digital A/F ratio meter and digital wideband gauges. Plus, Innovate wideband systems allow the sensor to be recalibrated for the ultimate in accuracy, maximum performance, and safety!

4.36 out of 5 stars ( 25 )

$109.99

—

$121.99

Lowdoller Motorsports Shock Travel Sensors

Lowdoller Motorsports shock travel sensors offer specific features that make them especially effective for performance applications, providing racers with precise data to optimize suspension tuning, diagnose chassis issues, and improve car performance on the track. The sensors are known for their compact size and compatibility with all major data loggers, making them easy to integrate into a performance vehicle's existing electronics. Select the Lowdoller shock travel sensors designed for your vehicle's suspension setup.

Not Yet Reviewed

$103.00

—

$165.00

On Sale

Holley EGT Probes

Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses

Not Yet Reviewed

$128.95

Lowdoller Motorsports Infrared Tire and Track Temperature Sensors

Lowdoller Motorsports infrared tire and track temperature sensors provide real-time, non-contact tire and track temperature data, enabling precise control over tire performance by allowing drivers to monitor and optimize the tire temperature within its optimal grip range. Key benefits include rapid and accurate measurements, the ability to detect uneven temperature gradients across a tire's tread for better suspension and pressure adjustment, and the capability to measure track surface conditions to tailor burnouts and understand overall track behavior. The sensors can also be used for brake temperature monitoring, adding versatility for racing applications. The sensors can be mounted in various locations to allow for flexible application on tires or near the track surface.

Not Yet Reviewed

$164.00

AiM Sports Replacement Wideband Sensors

AiM Sports replacement wideband sensors restore your data logging and data acquisition functions. Replacing damaged sensors with genuine quality units ensures your data will be correct. AiM Sports wideband sensors will keep your data clean, efficient, and accurate.

Not Yet Reviewed

$105.00

FAST XFI Driveshaft Speed Sensor Kits

FAST XFI driveshaft speed sensor kits measure driveshaft rpm to provide more accurate data for the traction control unit. Two magnets are fitted to the collar around the pinion yoke, which attaches to the driveshaft. When one of the magnets passes the pickup, it sends a signal to the XFI unit. They then use that signal to calculate both driveshaft rpm and driveshaft acceleration. As a result, these speed sensor kits provide much more precise readings, as opposed to determining driveshaft speed solely through variable engine rpm. The data they provide is perfect for drag race applications. FAST XFI driveshaft speed sensor kits are particularly beneficial for drag racers who need precise data to tune their vehicles for optimal speed and control, and to analyze performance during a run.

4.0 out of 5 stars ( 2 )

$238.95

Computech Weld-In Temperature Sensors

Computech weld-in temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes an 1/8 in. pipe thread weld-in bung. The probe is centered in the tube using a compression fitting screwed into the weld-in bung, both of which are included. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech weld-in temperature sensors are designed to be used with regular octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.

Not Yet Reviewed

$109.95

FuelTech Pan Vacuum Sensors

FuelTech Pan Vacuum sensors are designed to monitor crankcase vacuum inside an engine to ensure piston rings are sealing properly in the cylinders. A correctly sealed engine is vital in achieving maximum performance. One of the best ways to ensure you're keeping that ring seal at its optimum best is with the use of a FuelTech Pan Vacuum sensor. They're made from durable materials with a 1/8 in. NPT thread size to provide accuracy.

Not Yet Reviewed

$179.00

AiM Sports Vehicle Sensors

Knowledge is power and AiM Sports vehicle sensors will provide plenty of knowledge. Each sensor is designed to monitor a critical area of your race car, helping you tune your ride for better performance and greater consistency. Each sensor talks to an AiM sports data logger and display, allowing you to see the information in real time or download it later to analyze it for the next heat.

5.0 out of 5 stars ( 2 )

$155.00

—

$190.00

Manufacturer Rebate

Stack ST3800 Series Speedometer Proximity Sensors

Stack's proximity sensors are the suggested sensors for use with their ST3800 Series of electronic speedometers. Offering high performance and easy installation, the sensors are triggered by several targets (suitable metallic objects), producing pulses used to calculate vehicle speed. They have a built-in LED light which can be used to check that mechanical and electrical installations have been performed correctly.

Not Yet Reviewed

$116.99

AiM Sports Tire Temperature Sensors

AiM Sports tire temperature sensors provide a thermal reading of your tread (or any surface within its heat range) in real-time using infrared technology. These sensors include a 9.8 in. (25 cm) cable with a 719 push-on connector, allowing for direct connection to many AiM loggers. They feature a 35-degree field of view capable of accurately measuring specific tread areas or the entire tread, depending on how far from the surface they are. Mount the sensors inside the fender to shelter them from flying debris. AiM Sports tire temperature sensors simplify the task of achieving your optimum operating temperature for maximum traction.

Not Yet Reviewed

$139.00

Computech Bolt-On Temperature Sensors

Computech bolt-on temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes a 3/8 in. diameter ring connector for a bolt-on installation. The Computech bolt-on temperature sensors are designed to be used with regular octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures.

Not Yet Reviewed

$159.95

—

$169.95

Racepak Thermocouple Sensors

Whether you're looking for a cylinder head temperature, intake manifold temperature, exhaust gas temperature (EGT), or fluid temperature sensor, Racepak thermocouple sensors have you covered. Racepak also offers adhesive thermocouples that eliminate the need for bung and other sensor mounting methods, making them ideal for a number of surface temperature readings such as shock housing, engine block, fuel tank, fuel pump, electric motor, and battery temperature. These Type-K thermocouple assemblies (Nickel-Chromium/Nickel-Aluminum) are precisely designed for their specific applications and must be used with the appropriate thermocouple amplifier module (sold separately). All probes are terminated with a male 2-pin mini-connector.

Not Yet Reviewed

$161.95

—

$163.95

Manufacturer Rebate

Stack Wheel Speed Sensors

The acquisition of speed data is important to monitor and provide real-time data to optimize the tuning and performance of your race car. Stack wheel speed sensors accurately detect rotational speed of a wheel, providing data to the ECU, and enabling racers to analyze the car's performance and refine their car's setup.

Not Yet Reviewed

$157.99

Manufacturer Rebate

Innovate EGT Probes

Innovate's TC-4 Plus is ideal for applications such as dynamometers, data acquisition systems, or standalone ECUs. They offer crucial benefits for engine tuning and protection by providing high-quality, precise, and fast temperature readings. For turbocharged engines, race cars, and high-performance builds, EGT monitoring is an essential diagnostic tool that goes beyond what a standard air-fuel ratio (AFR) gauge can provide. Additional product details: * The probes are built with durable materials to withstand the extreme temperatures and vibrations found in performance and racing applications * Available individually for replacement or as an added accessory, the probes include a weld-in stainless steel fitting and bung with 6 ft. wire * Innovate's K-type thermocouples are compatible with their range of tuning devices and data loggers, including the TC-4 Plus, LMA-3, and DL-32

Not Yet Reviewed

$117.99

FAST Speed Sensor Loops

FAST speed sensor loops are magnetic sensors designed for high-performance automotive applications, including drag racing, to accurately measure the rotational speed (rpm) of a vehicle's driveshaft and calculate its corresponding speed and acceleration. By attaching magnets to the driveshaft that pass by a pickup sensor, the system provides more precise data than engine rpm alone, enabling features like more accurate data logging of miles per hour and miles per gallon for the FAST XFI system. Race with the confidence of precise data using FAST speed loop sensors!

Not Yet Reviewed

$137.95

Computech Exhaust Temperature Kits

Computech exhaust temperature kits offer an economical way of maintaining a consistent tuneup, week in and week out. The leaner your engine is, the hotter the temperature. The richer the engine is, the cooler the temperature. Where EGT sensors really excel is maintaining a specific tuneup. Once you find a setup where your engine is running safely and consistently, you can note the temperature and then strive for that temperature every race, ensuring your engine is tuned consistently. The kits include a 3/16 in. stainless steel exposed junction thermocouple, a compression fitting, a 10 ft. braided stainless extension wire, and a connector.

Not Yet Reviewed

$109.95

FAST EGT Probes

The EGT (Exhaust/Gas/Temperature) probes from FAST measure the temperature of exhaust gases to provide real-time data for optimizing engine performance, ensuring fuel efficiency, and preventing engine damage. By monitoring individual cylinders, they help identify engine issues like uneven fuel-air ratios and overheating, which can lead to costly component failures. The probes convert this temperature data into an electrical signal, which is then processed by a monitoring instrument like the FAST XFI module and a dash logger to give operators insights into engine health and performance.

Not Yet Reviewed

$163.95

49 Results Found For "sensor"