Availability
Showing In Stock Items. Show All 64 Items.
Ford Performance Parts ignition coil sets are stock replacement coils for a variety of late model Ford V8 engines. They're required when installing some Ford Performance heads on 2005-07 and early 2008 Mustang GTs originally equipped with "High Thread" design heads. Fit your vehicle with the right ignition coil sets designed by the original maker and rest assured that the performance will be exceptional.
( 19 )
$520.99
Ahoy! If you're looking for a simple, powerful solution for high performance boating, then these Davis Unified Ignition marine D.U.I. distributors from Performance Distributors are the answer. These virtually waterproof and vibration-proof distributors are easy drop-in units with one-wire hookup. There are no wiring hazards to leave you adrift and no hassles! The electronic Dyna-Module and high-voltage coil are built inside of the distributors and produce a longer spark duration, allowing you to widen your plug gap and get a more complete fuel burn. Marine D.U.I. distributors are available in performance versions that crank up to 7,000 rpm and racing versions at 10,000 rpm. D.U.I. distributors are calibrated by machine to dial-in the smoothest advance curve for your application. They are hand-assembled, polished, lubed, and checked for exact tolerances, and the housings are drilled with flame arrestor holes. All of these features allow you to navigate with instant throttle response and more power. Whether you're taking a leisurely ride around the lakes, offshore cruising, or running the waves, anchor your boat with high performance marine D.U.I. distributors from Performance Distributors.
( 72 )
$565.00
On Sale
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$580.65
$522.59
JMS Chip PowerMAX FuelMAX V2 are devices that truly deliver! These fuel pump voltage boosters provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle. Up to an 80 percent increase in fuel delivery is possible to feed your high performance engine! The maximum output voltage range is user selectable and is controlled by a knob in the faceplate, or via the optional in-cabin over-ride control knob that adjusts voltage on the fly. These JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump. PowerMAX FuelMAX V2 units feature proprietary enclosures and industrial heat-sink, with 10-gauge heavy-duty wiring and either 40 or 80 amp fuses—along with a host of innovative features to further improve your experience. For users that want the ultimate in easy installation, the plug-and-play option connects directly to the FPDM (fuel pump driver module) and activates via monitoring the pedal position sensor (PPS), eliminating the need to run wires through the firewall. Also available is a universal device that is easy to wire in--just cut and splice a single wire. Choose from single or dual inputs/outputs, cut-and-splice or plug-and-play versions, and 3-ways to trigger boosted output. Kits include: * PowerMAX device * Heavy-duty OEM-grade wiring harness * User adjustable Hobbs pressure switch * 1/8 in. NPT adaptor fitting * Wiring terminals * Wire splices and heat shrink * Solder * Vacuum line and tees * Mounting hardware * 40 amp fuses
( 4 )
$599.75
—
$689.75
You don't need a new fuel pump; you need JMS Chip PowerMAX FuelMAX—the "Boost-A" devices that truly deliver! They provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle--up to an 80 percent increase in fuel delivery is possible. PowerMAX FuelMAX voltage boosters feature proprietary enclosures, industrial heat sink, 10-gauge heavy-duty wiring, and either 40 or 80 amp fuses, along with a host of new and innovative features to further improve your experience. Choose from single or dual inputs/outputs, plug-and-play versions, and 3-ways to trigger boosted output. JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump.
( 8 )
$599.75
—
$689.75
JMS Chip Smart Spark Tran AM TA2 ignition systems are complete plug-and-play racing ignition systems specifically designed to be used on LS-based TA2 racing engines. These fully encapsulated devices are preprogrammed with approved TA2 ignition timing advance tables. This TA2 Super Speedway version has been designed after JMS Chip's Daytona sensors Smart Spark ignition system and then created to meet specific Trans Am TA2 racing requirements. Order the model you need. Product features and details: * Smart Spark TA2 SS—LS supports approved TA2 GM LS racing engines (carbureted LS engines with 58-tooth crank trigger) * Preprogrammed with approved TA2 ignition timing advance tables * Unit is sealed for the TA2 racing series * Status LEDs—display device and trigger input status * Fully encapsulated construction * Heavy-duty 12-pin Deutsch connectors used for signal connections
Not Yet Reviewed
$599.75
JMS Chip offers the CD-1 Super Speedway ignition boxes, designed specifically for professional racing use. These plug-and-play capacitive discharge ignition boxes have a fully encapsulated construction, are lightweight and compact in size, and use an advanced 12-pin Deutsch connector for signal connections and components. Main features: * Capacitive discharge ignition box unit * All wiring terminated into plug-and play WeatherPack connectors * Compatible with 8-cylinder racing engines triggered by a magnetic pickup distributor or crank trigger * 135 MJ spark energy output * Set maximum rpm limit up to 9,900 rpm with 100 rpm steps * Highly efficient switching power supply based on US patents 6518733 and 6636021 * Less than 5-amp current draw at 8,000 rpm * Approved for Southern Super Series cars, Super Late Model Tour and Spears Southwest Tour Series
Not Yet Reviewed
$649.75
On Sale
MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Coil bracket -- Uses a bolt/nut combination instead of the easily stripped self-tapping screw * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector
( 2 )
$699.95
—
$749.95
$628.95
—
$673.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$599.95
—
$749.95
$538.95
—
$673.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$849.95
$557.95
—
$763.95
On Sale
Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.
( 64 )
$799.95
$718.95
On Sale
MSD 7AL-2 Plus CD ignitions have all the features of the standard 7AL-2 with the addition of a 2-step rev control and a new diagnostic LED to deliver their full power at any rpm. Their multiple spark discharge circuitry gives better throttle response, off-corner performance, smooth idle, and more consistent launches. Their built-in soft touch rev control protects your engine from damage due to over-revving and they feature accurate rev-limiting action that's smooth, without backfires or roughness, and adjustments are easily made with plug-in modules. They can be triggered from points, magnetic pickups, crank triggers, and electronic amplifiers. MSD 7AL-2 Plus CD ignitions are available for 4, 6, and 8-cylinder engines. From NHRA to Circle Track, they're proven winners.
( 19 )
$849.95
$763.95
On Sale
The MSD Pro-Billet HEI distributors pick up where the originals left off. Drawing on years of high-performance ignition experience, MSD engineers created a unique ignition module and internal coil that are capable of running above 9,000 rpm. Stock and other aftermarket modules lose spark energy at about 4,500 rpm. These modules produce 50 percent more current than stock units, and deliver a much more precise timing signal as well as more dwell control. The coil delivers over 100 millijoules of energy across the plug gap. For strength and high rpm stability, the QPQ-treated oversized shaft is guided by a sealed ball bearing on top and long sintered bushing at the bottom. The QPQ coating provides a low-friction coating on the shaft and also makes it highly resistant to corrosion. TIG welded to the top of the shaft is an adjustable mechanical advance assembly. The distributors are supplied with extra springs and stop bushings, so you can tailor an ignition curve to match your driving needs. The advance assembly features chromoly weights that slide on nylon pads for smooth timing advancement through the entire rpm range. There is also a vacuum advance canister to improve economy while cruising. All of these features are enclosed in a great looking, billet aluminum housing that is CNC-machined for accuracy and incredible strength. The distributors come complete and ready to drop in with a high-quality rotor and cap with brass terminals for great spark transfer. Simply connect a 12 V source to the distributor and you're up and running. They're designed to replace GM HEI distributors that use a 4-pin ignition module.
( 38 )
$649.95
—
$699.95
$583.95
—
$628.95
On Sale
For racers that need serious spark output, the MSD Ultra 7AL ignition boxes are the right choice. Offering industry-leading spark energy output in a compact and efficient package, the Ultra 7AL includes four step retards, three rev limits and two rpm-activated switch outputs. The Ultra 7AL also features two different power output settings that can be used for on-the-fly changes which are perfect for drag-and-drive applications. All features are adjusted using plug-in modules including the 3-step rev control and multi-step retard. The rev control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus, there are two rpm activated switch outputs that can be used for air shifters, shift lights or other devices that require a perfectly timed ground trigger! For increased output and proven multi-spark power, use MSD Ultra 7AL ignition boxes. Ultra 7AL multiple spark ignition control features and benefits: * High-output continuously delivers high energy for maximum performance even under extreme race or street conditions * Lighter, and over 50 percent smaller than the 7AL-3 model * Two different power output settings for on-the-fly changes for drag-or-drive situations * Twice the spark output of the 7AL-3, (330mJ vs 160mJ) * Adjustments made using plug-in modules for the 3-step rev control and multi-step retard * Rev control can set one rev limit for burnout, another for the staging rpm limit, and a third for high rpm engine protection * Quickens throttle response * Adjustable start retard can control the amount of retard pulled out during engine cranking * Adjustable switch for start retard settings eliminates the need for additional external wiring to the starter solenoid * Two rpm activated switch outputs (compared to the 7AL's single RAS output) * Two multi-colored status LEDs Emissions Note: This part is only legal for sale and use on uncontrolled (non-emissions controlled) vehicles or on vehicles used solely for the purposes of closed competition racing.
Not Yet Reviewed
$799.95
$718.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$825.95
$513.95
—
$742.95
On Sale
MSD has raised the bar with their 6M-3L marine ignitions. They are fully-sealed units featuring single wiring connectors that make installation a breeze. Each ignition box is designed with three rotary dials and an LED display to simplify setting the cylinder select, start retard, and rev limiter--plug-in rev limiter chips and hard-to-read dials are a thing of the past. For diagnostic purposes, the LED displays can also be set to a "live" tachometer mode on V8s and will even display the battery voltage with just a quick turn of a knob. Boasting more features and higher spark energy than its predecessor, MSD 6M-3L marine ignitions are definitely performance upgrades your boat needs! Additional features and benefits include: * Large, easy to read LED display * Shift interrupt feature eases shifting * MSD's smoothest rev limiter yet, protecting parts and saving your engine * Records highest rpm the engine turned for last 20 minutes of run time * Easy setup of features with three rotary dials on the face of the unit * Built-in start retard adjustable in 0, 10, or 20 degree increments for quick, easy starts and extended starter life * LED display shows rev limit, highest rpm turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy and easy starting down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Fully potted housing to withstand demanding marine conditions * Sealed connector for clean wiring and trouble-free operation * Works on 4, 6, and 8 cylinder engines * Reverse polarity and overheat protection provide ultimate reliability * Can be triggered by magnetic pickup, amplifier, and points inputs
( 1 )
$599.95
$538.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 804 )
$649.95
$508.95
—
$649.95
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$579.95
$520.95
—
$579.95
On Sale
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 93 )
$579.95
—
$632.95
$520.95
—
$568.95
On Sale
Holley EFI Smart Coils are a bolt-in ignition upgrade for your late model HEMI or Coyote engine. Here's the difference over a stock coil: they produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are available individually or in sets of 8. * For Coyote or Hemi combinations currently using Holley EFI or Terminator X, use Smart Coil Ignition Harnesses 558-312 and Coil Extension Harnesses 558-326 for a plug-and-play solution. * For new Holley EFI installations on Coyote engines, use with Holley EFI Coyote TI-VCT Main Harness for Smart Coils 558-122 and Smart Coil Ignition Harness 558-312 for a plug-and-play solution. Features: * Direct bolt-on to factory valve covers * Same wiring pinout as other IGN-1A coils for easy plug-in upgrades (Will not work with factory wiring) * More spark energy than any other smart coil on the market for maximum fuel burn during combustion sequence * Low current draw means less demand on the electrical and charging system * Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECUs * Maximum operating voltage of 18 V—for compatibility with both 12 V and 16 V electrical systems found in many performance/race applications
Not Yet Reviewed
$799.95
$718.95
On Sale
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$699.95
$525.95
—
$699.95
Davis Unified Ignition SOS ignition coil packs feature advanced technology to pack more electrifying voltage into them for pure ignition performance. The SOS (Sultans of Spark) ignition coils are designed with increased windings to boost spark output up to 40,000 V! That is a 60 percent increase in spark energy over the 25,000 V produced by the stock ignition coils. The higher voltage, along with an increased spark duration, allows spark plug gaps to be opened up. The larger gap exposes a hotter spark in the combustion chamber for an increased burn of the fuel mixture, resulting in more horsepower and better fuel economy. Davis Unified Ignition SOS ignition coil packs also provide quicker starting, smoother idle, and excellent throttle response. They are direct replacements for the factory coil packs and do not require any special modifications for installation.
( 84 )
$519.00
—
$549.00
Granatelli Motor Sports Pro Series Xtreme coil packs output a whopping 65,000 V, making them the undisputed king of coils. Specifically designed for supercharged, turbocharged, and high-level nitrous applications, these Xtreme coils will not suffer the spark blowout common in weaker coils. And, thanks to Granatelli's patented isolator rings, there is 0 ohm resistance and no RFI/EMI interference. Up your engine's power to perform with a set of Pro Series Xtreme coil packs from Granatelli Motor Sports.
( 13 )
$580.45
—
$838.95
Granatelli Motor Sports OE replacement coil packs are designed to replace your factory coil packs with their high performance version. They use advanced bobbin technology, a special magnetic steel core, and premium windings. The result is increased spark energy and voltage output. The coil packs are built to OEM sizing, so they are a direct-fit on your stock ignition system.
( 4 )
$570.82
—
$665.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
