Availability
Showing In Stock Items. Show All 13 Items.
These MSD wire adapters allow you to install MSD components into your common distributors. Make every installation look professional by eliminating cut or spliced wires.
( 28 )
$72.49
On Sale
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 48 )
$77.15
$53.35
—
$79.09
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$131.95
$92.59
On Sale
After an MSD DIS-2 series ignition control is installed on the waste spark ignition system of some vehicles, the ECM of the vehicle will not be able to receive a cam sync signal. These MSD cam sync generators produce a cam sync signal after startup for the factory ECM. This is done by detecting a cylinder that is under compression through its signal wire, which is wrapped around the designated spark plug wire.
( 2 )
$106.95
$96.25
On Sale
MSD 6EFI ignition coils produce high-spark energy to ensure the air and fuel in your engine get burned completely to improve starting, throttle response, and supply powerful spark throughout the RPM range. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance with logos laser-etched on a black anodized aluminum mounting bracket, and is supplied with four, self-tapping mounting screws, plus a plug-in harness with color-coded wires to facilitate an easy installation. When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you! In addition, an MSD spark plug wire boot and terminal come in the kit to convert your existing coil wire from a female socket connection, to male high energy ignition (H.E.I.) connection if needed.
( 2 )
$65.89
$59.35
On Sale
These cap and rotor kits from MSD are replacements for the 44 amp Pro Mags, or the 12 amp band clamp models. The caps are molded form alkyd material and have excellent high-voltage characteristics. Brass spark plug style terminals are used for solid connections and a firm grip to the plug wire terminal. The rotors are injection-molded from Dupont Rynite, a strong glass-reinforced material. Tall vanes are molded on the top of the rotors to stir up the air, preventing ozone buildup and crossfire from occurring. A brass/stainless steel rotor tip is screwed into the rotor, ensuring a long life at high rpm.
( 3 )
$79.09
$71.15
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$72.49
$57.49
—
$72.45
On Sale
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
$70.35
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$79.05
$51.75
—
$86.99
On Sale
MSD Cap-A-Dapts have HEI-style posts, an adjustable rotor to allow proper phasing (Chevy and Mallory YL only), and wider post spacing to prevent crossfire and ionization. The kits include a high-quality cap with brass terminals, a rotor, and a cap spacer.
( 44 )
$86.99
$78.25
Innovators West Crank Trigger replacement pickups feature the same electrical plug and thread size to be compatible with MSD ignition systems and others that use Flying Magnet Style. Polarity of the wires on the crank trigger sensor will likely affect your timing on a MSD Ignition System. MSD advises that the correct polarity is the one that has the most timing advance on a Digital Ignition. For analog ignitions, this is opposite, and the correct polarity is the one that has the most retard. You must try both polarities to see which one generates the most advanced setting on a digital ignition (or most retard on analog ignition).
( 1 )
$86.95
FuelTech CDI racing coils were developed to be used with the FuelTech FTSPARK on engines running individual coils and also rotary engines. The coils are designed to be used ONLY in conjunction with capacitive discharge ignitions (like a FTSPARK, for example). Using the coils with inductive ignition drivers will damage them. Do not use with FuelTech SparkPRO. Recommended spark plug wires: MSD Super Conductor, MSD-31193.
( 2 )
$79.00
Proform LS ignition coil brackets are designed to mount your ignition coil packs up and off the Proform LS valve covers so that you can view the beautiful Chevrolet logo. They are a unique rail mounting system that directly attaches to the threaded holes on the Proform LS valve covers, and the individual coils attach to the rail so that they can be mounted in multiple positions.
( 16 )
$58.99
—
$59.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
