Availability
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 93 )
$65.89
—
$79.09
$49.42
—
$71.15
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 807 )
$114.95
$103.45
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 255 )
$318.80
—
$383.00
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 58 )
$17.99
—
$18.99
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1002 )
$112.95
—
$183.50
FAST PS40 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high-rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 4 )
$67.95
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 83 )
$22.99
—
$23.99
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$173.30
—
$223.85
PerTronix Flame-Thrower magnetic trigger billet distributors are perfect alternatives to the more expensive distributors that competitors offer. These distributors feature a precision magnetic pickup coil and reluctor for extremely accurate signaling at low and high rpm. An over-molded magnetic pickup coil supports windings, while providing excellent resistance to corrosion. Tyco Mate-N-Lok connectors work with most ignition system harnesses. A specially engineered reluctor made from lightweight FC-0208 alloy offers superior dimensional stability for symmetrical spark separation. PerTronix Flame-Thrower magnetic trigger billet distributors are compatible with most capacitive discharge ignition boxes.
( 12 )
$273.81
PerTronix Flame-Thrower British engine performance distributors are modeled after the 45D Series distributor. Built using all-new castings, these distributors are precision-machined for an exact fit. They deliver twice the voltage to your spark plugs, increasing horsepower, fuel economy, and spark plug life. Flame-Thrower Performance distributors for British engines feature rotating cobalt magnets that trigger a Hall Effect integrated circuit. There are no points to burn or moving parts to wear out--in fact, you can expect a 2:1 improvement over points in current fall time for increased coil output. Their tailored advance curve provides optimal performance and drivability. PerTronix Flame-Thrower British engine performance distributors are made using an epoxy molding, making the module impervious to oil, grease, dirt, and moisture. Offered for 12 V negative and positive ground systems, these distributors feature stable timing with no need for adjustments.
( 11 )
$366.55
On Sale
Mallory constructed these distributor rotors from an innovative, space age plastic that combines the high dielectric strength required for today's high-energy ignition systems and high impact-resistant qualities to prevent damage. Plus, they use corrosion-resistant brass inserts and stainless steel rotor springs to provide an unrestricted energy flow.
( 42 )
$30.81
$16.95
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$161.75
—
$179.30
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 54 )
$279.10
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
—
$280.10
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$112.95
—
$179.30
Don't take chances with an old, questionable, or malfunctioning condenser that can leave you stranded. Standard Motor Products replacement ignition condensers are designed to exceed OEM specifications for reliable, maintenance-free operation. Trust your vehicle's ignition and electrical system needs to Standard Motor Performance.
( 18 )
$6.99
—
$8.99
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 114 )
$42.99
From raw materials to the final product assembly, each Spectra Premium ignition coil goes through rigorous test requirements to ensure they meet or exceed OE specifications for fit, form, function, and proper installation. Order the model designed for your vehicle and engine application. Features and benefits of all Spectra Premium ignition coils: * Each unit is durability tested at 100 cycles of thermal shock (-50 to 300 degrees F) to ensure reliability against extreme vibration * Each coil is road tested to ensure real world performance and to verify that each design meets Spectra's quality standards * 100 percent copper in both primary and secondary windings * Windings insulated by high-voltage enamel coating
( 1 )
$12.99
Is it time for a tuneup? Replace your distributor's worn-out rotor with a new one from Standard Motor Products. Don't take chances with old, questionable, or faulty ignition components that can leave you stranded. Standard Motor Products replacement distributor rotors are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to Standard Motor Performance.
( 48 )
$6.99
—
$9.99
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$223.30
Beck/Arnley ignition coils are high-quality replacements, available in styles such as coil pack, E-core, canister, and C-core. These OE-type direct-fit coils will deliver the spark your engine needs to run efficiently. Order the model designed for your vehicle application.
( 9 )
$38.99
Is it time for a tuneup? Replace your distributor's worn-out breaker points with new ones from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement breaker points are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These inexpensive units are available for use in a wide variety of makes and models. Trust your vehicle's ignition system needs to Standard Motor Performance.
( 20 )
$15.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 101 )
$142.99
—
$180.99
Here is a line of distributors that you will want for your MG--Davis Unified Ignition Street/Strip D.U.I. distributors. These powerful, one-piece, one-wire distributors will provide your MG's ignition system with Performance Distributors' technology. No more changing points--a simple hookup and instant throttle response are all part of the D.U.I. advantage for you MG. With a 50,000 V coil and high-output Dyna-Module, you can widen the plug gaps for the longer spark duration and provide your MG with a more powerful burn of fuel mixture. These uniquely designed distributors are calibrated on a distributor machine with a very smooth advance curve, and if you ever need replacement parts, no problem--GM HEI replacement parts fit right on. So, what are you waiting for? Get the distributors with firepower for your MG--Performance Distributors Street/Strip D.U.I. distributors.
( 1 )
$485.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
