Availability
Showing In Stock Items. Show All 177 Items.
ididit high beam/low beam switching relays wire directly into your high beam and headlight switches. They feature a resettable fuse so no additional fuse is needed. Once installed, you can press the high/low button when the headlights are off and momentarily turn on the high beams. With the headlight on, the high/low switch works like normal to toggle between high and low beams.
( 5 )
$123.00
Fuel pressure drops and the LED illuminates—and if it doesn't, you may need to replace the pressure switch. BD Diesel offers quality replacements for their alarm light kits. The pressure switches will provide a ground when the fuel pressure drops below 5 psi, then your LED will illuminate warning you of a problem. Maintain your warning system with replacement pressure switches from BD Diesel.
( 1 )
$56.95
RESTOPARTS® Manufactured low brake pressure warning switches are key to monitoring your brake system. Reproduced to factory specifications, these switches screw into the combination valve and alerts you to low brake pressure with a warning light in your dash cluster. They feature a brass centers and plastic bodies, and are must-haves for any vehicle.
( 3 )
$25.99
Stop battery drain with a Flaming River low-voltage battery disconnect! These switches automatically disconnect auxiliary loads when the battery has drained past a safe, user-specified threshold. This threshold stops parasitic drains within the system that would completely drain your battery, leaving you with enough charge to start the vehicle or perform other tasks. Simply engaging the ignition or charging the battery will automatically reconnect the battery to your vehicle. The battery will remain connected while the vehicle is operating and can be manually controlled by a dash-mounted push button. Product details: * Automatic disconnect through battery voltage measurement. Disconnects auxiliary loads when battery has drained past a specified threshold. (This is a safe battery level designed to allow the user to restart the vehicle.) * Battery charging will automatically reconnect the load * Positive voltage from the ignition line will prevent load disconnect while the vehicle is operating * Manual disconnect operated by dash mounted toggle ON/OFF switch * System status can be monitored via LED indicator * 1-3 mA current draw while monitoring battery voltage * Thermal protection from overheating * Environmentally sealed device for maximum life span (IP6K7/IP69K ratings) * Includes 4-way wire harness (13 ft. long) with connections to vehicle ignition, ground, command button, and indicator light
Not Yet Reviewed
$327.99
Want to make sure your brake lights are working correctly? These low-pressure brake light switches from Painless Performance come complete with a plug-in pigtail and pipe thread fitting, and offer you the reliability you need.
( 42 )
$18.99
Are you tired of checking the fluid in your boost cooler reservoir? We have the solution. These Snow Performance low-level indicator kits include a float switch and an indicator light that lets you know when your reservoir is running low on fluid. They are simple to install and can be used on any Snow Performance reservoir. No need to worry anymore about the level of fluid in your reservoir--the Snow Performance low level indicator kits will keep you running at optimum power and reliability, mile after mile.
( 1 )
$20.82
Titan 36-piece low-profile mini blade fuse assortment kits are convenient to have on hand. They contain five each of seven different amp replacement fuses, plus a fuse puller.
Not Yet Reviewed
$13.99
Clearance
Denali Electronics DrySeal HI-LOW-OFF waterproof switches replace the standard ON-OFF switch. They enable independent dimming of the lights, separate from the vehicle's OEM lighting system. This eradicates the issues presented by vehicles that do not provide a clean 12 V high beam trigger signal. These switches are also a great option for those who want full independent control of their auxiliary lights. In addition to molded silicone gasket seals, Denali uses a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures the housings are 100 percent watertight, even when submerged underwater with the wires cut and connector removed.
Not Yet Reviewed
$38.99
$29.50
AEM Electronics VCU 200 low-voltage harnesses mate together, wiring your electric vehicle (EV). One is to be installed in the rear half and the other in the front. The front half assembly is VCU hardware specific. AEM EV harnesses are pre-terminated. Connector interface features include: * Power Distribution Unit (PDU) * Combined Charging Unit (CCU) * Isabellenhutte (IVTS)--current voltage shunt-based measuring system * Life Energy Motion (LEM)--current voltage DHABs/124 transducer sensor * Inverter CAN (INV CAN) * Inverter High-Voltage Interlock (HVIL) * Inverter Power (INV PWR) * J1772 flying leads--Proximity Pilot (PROX) and Control Pilot (CP) * Inline signals * Inline CAN
Not Yet Reviewed
$665.95
BangShift Billy Buttons are wireless solutions that enable you to trigger any 12 to 24 V system or accessory in your car, truck, 4x4, or recreational vehicle. They can be used with line locks, trans-brake, nitrous activation, lights and light bars, horns, blinkers, winches, air compressors, and more. BangShift Billy Button wireless button systems are offered with high or low amperage power harness options made with high-quality TXL wire. Choose the amperage harness based on your application needs. Features and notes: * Each kit includes four buttons, transmitter, receiver, universal transmitter mount, single-wire antenna for optional use, and TXL wiring harness with Deutsch connectors. * High-amperage option -- Designed for powering accessories and devices directly -- Can power four 30-amp circuits -- Includes 2 ft. 4-gauge power cable * Low-amperage option: -- Designed for low-draw circuits (less than 2.5 amps), like ECU inputs and relay triggers -- All low-amp harnesses come with wires pinned, but not installed into their respective connectors -- Includes 4 ft. 14-gauge power wire, 2 ft. 18-gauge ground wire, and 4 ft. 18-gauge signal wire (unpinned)
Not Yet Reviewed
$608.70
These Longacre Sprint Car battery pack complete kits include: * Holder for lightweight 9 V battery * Low oil pressure switch (20 psi) * Warning light * Heavy-duty, polymer coated, weatherproof magneto kill switch * Wire and terminals
Not Yet Reviewed
$48.99
—
$52.99
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 39 )
$4.99
—
$55.50
Built on the same design as Techflex's Flexo F6 and F6 Woven Wrap, Techflex F6 Flat sleeving is a self-wrapping sleeve used to bundle and protect wire harnesses and cable assemblies in areas where space constraints restrict the use of traditional sleeving. Lightweight and durable, it maintains its flexibility to conform to irregular shapes and bends during installation. Woven from monofilament and multifilament polyester yarn, F6 Flat provides noise suppression and a high level of mechanical abrasion protection … making it perfect for use in automotive applications. The low-profile design of Techflex F6 Flat sleeving is great for channeling and protecting wires that run under the carpet or in the headliner.
( 5 )
$16.99
Don't take chances with old or questionable blower motor switches that can leave you cold. Standard Motor Products blower motor switches are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's needs to Standard Motor Performance.
( 6 )
$19.99
On Sale
HV (high-voltage) contactors are widely used in electric vehicles (EV) and hybrid electric vehicles (HEV). AEM Electronics offers a couple of choices in this area with their Rincon Power high-voltage contactors. One is a low-cost, pre-charge solution that meets RoHS 2011/65/EU and is PCB (printed circuit board) mountable. The other is hermetically sealed with gas fill and has an integrated coil economizer to reduce coil holding power. It meets RoHS 2011/65/EU, is CE certified, and IEC60947-4-1 compliant. Choose the one needed for your application.
Not Yet Reviewed
$56.65
$31.95
—
$161.95
Pico Add-A-Circuit fuse holders are ingenious devices that allow for the quick and easy installation of additional 12 V accessories without the need for splicing. These electrical fuse taps easily plugs into an existing fuse holder to protect the original circuits and provide a wire lead for a new circuit. Select the Pico add-a-circuit fuse holders for your application needs.
( 15 )
$6.99
Pico connector pigtails can help to eliminate the unnecessary cutting and splicing of wires. They're available in a variety of styles, designs, and configurations to fit many electric-related harnesses on the engine, lighting, electrical, or ignition systems. No more messy connections or wires running all over the place—Pico wiring pigtails provide easy, clean replacements for your damaged or faulty OEM connectors.
( 156 )
$4.99
KaferLab is dedicated to delivering the coolest parts for your vintage Volkswagen, and their switch trim ring covers are ready to add a classy, finished look to your VW's dash. KaferLab switch trim ring magnetic covers are machined from billet alloy, and then painted to a perfect factory color match, providing strong, long-lasting, and great looking switch covers. Plus, they are available in several colors and magnetic, making them easy to install or change whenever you would like a different color accent for your interior. Choke, fog lamps, ignition, headlight, and wiper switch covers are available. Complete the look of your VW; select the switch covers in the style and finish preferred.
Not Yet Reviewed
$24.95
On Sale
Summit Racing Equipment® offers wiring harnesses for a wide range of vehicles—including many Chevrolet, Pontiac, Oldsmobile, and American Motors models from the 1960s and '70s. The factory-style replacement harnesses are ideal for restoration and upgrade projects. They are available to connect and power up a variety of dashboard and accessory functions. Order the wiring harness recommended for your application.
( 3 )
$14.99
Four Seasons replacement electrical switches are engineered and tested to provide years of trouble-free operation. They offer a large selection of switches for vehicle specific applications to maintain and service HVAC systems. Four Seasons replacement electrical switches are zinc coated to resist corrosion.
( 7 )
$44.99
—
$59.99
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 28 )
$25.65
NOS solid-state relays address the need for reliable, rugged, and affordable control of various electrical equipment on your race car. Originally designed to control the high-current switching loads of nitrous solenoids, these relays can also be used to control other high-current devices—such as electric water pumps, trans-brakes, and line locks. NOS relays feature an ultra-low activation/release time of less than 16 microseconds to ensure no delays in reaction times. The solid-state relays can also be Pulse Width Modulated (PWM) with no minimum-duty cycle at frequencies up to 1000hz. NOS solid state relays feature: * 5-20 V DC operation * Rugged solid-state circuitry * Easy 3-wire connection * Included terminated pigtail * Included extra contacts for build-your-own wiring * Ultra-fast activation, under 16 microseconds * Pulse Width Modulation (PWM) compatible * PWM 0-100 percent * Up to 1000hz frequency * Vibration-resistant * Maximum continuous current = 40 amps * Maximum switching current = 20 amps
( 14 )
$94.75
Vintage Air replacement trinary switches combine low and high pressure compressor clutch cut-off functions plus an electric fan engagement signal at 254 psi. The low pressure cut-off of these trinary switches is 30 psi and the high pressure cut-off is 406 psi. These are the replacement switches only for Vintage Air trinary switch kits.
( 49 )
$42.99
MSD relay modules are designed to be easily installed in most automotive electrical systems where a high amperage relay is needed. These relay modules are perfect use with high amperage electric fuel pumps and high CFM electric cooling fans. The relay housing comes with a labeled lid that snaps into place providing a clean installation and protecting the main power stud and triggers from contamination or accidental contact. MSD offers these relay modules with different channel outputs, select the model that's designed to meet your application needs. Features include: * 7 V to 20 V supply to fit a wide variety of applications * Independent 40A outputs, to supply power to most aftermarket fuel pumps and electric fans * Configurable single-wire activation with Ground (-) input or 12 V (+) input, with removal of the Tie-Bar * Removable cover for easy accessibility * Low-profile JCASE fuses provide ample protection in case of a short * LED status indicators, show you which channel is triggered at a glance
( 14 )
$58.95
—
$161.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
