Availability
Showing In Stock Items. Show All 160 Items.
A common problem faced by rodders and kit car builders is where to mount turn signals since many aftermarket steering columns are not designed to accommodate the necessary wiring and switches. Problem solved, with this new integrated turn signal kit from Painless. The toggle switches for both turn signals and flashers can be mounted anywhere. Because the kit is designed to be an integrated system, turn signals will work in conjunction with brake lights.
( 9 )
$111.99
Digi-Tails LED taillight conversion panels are much more visible than your standard taillights. These light panels contain high-intensity, wide-angled LEDs that are strategically positioned to maximize light output and fully optimize your lenses. Each light panel is custom engineered to fit the vehicle's housing precisely. Features and details include: * Fully sequential LEDs light up in a fluid, sweeping pattern * Allows switching between standard light and fully sequential * Includes LED boards and wiring * Includes components for both left and right sides on vehicle * Use of LED flasher recommended (sold separately)
( 63 )
$189.00
—
$268.00
Keep It Clean GM-type switch kits offer CAD design engineering that provides smooth operation. The unique screw-on design offers a clean, smooth look and makes installation a snap. The kits include a floor mount dimmer switch, GM headlight switch, 4.25 in. shaft for headlight switch, ignition switch with coded keys, wiper switch, and two polished billet aluminum knobs. Wire your ride right the first time, wire your ride with Keep It Clean!
( 1 )
$139.95
Flaming River push/pull battery disconnect mounting kits allow you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. They include the correct brackets, swing arm linkage, an 18 in. long black anodized aluminum actuator tube link, and the necessary bushings and mounting hardware for installation.
Not Yet Reviewed
$123.99
Auto Rod Corporation produces wiring solutions for the race car and street rod driver alike. They supply a variety of electrical switch touch panel replacement components, such as ribbon cable and more. ARC parts are quality-made and ready to assist you in installing or upgrading your flat touch switch panels.
Not Yet Reviewed
$112.99
Air Lift 3H/P second compressor harnesses allow you to add a second compressor to any 3H or 3P system. Includes: * One second compressor wiring harness * One fuse holder with 30-amp fuse * Three butt splice connectors * Two eyelet ring terminals * One self-tapping screw for mounting relay
( 1 )
$150.00
Electric-Life billet door wire looms are designed to hold any wires going to your door. They are made from stainless steel braided hose with a PTFE liner, and have special slider inserts to conceal the wire.
( 13 )
$106.25
Why not add some "progressive" pizazz to your turn signals? Scott Drake sequential control modules can be used to wire any multiple lamp configurations on custom vehicle lighting projects. They're an easy and affordable upgrade for your Mustang—delivering results seen by every driver behind you. These programmable plug-and-play modules feature variable rate adjusters and color-coded wire harnesses. Projects that have separate brake and turn signal circuits require a sequential module for each circuit.
( 2 )
$184.95
Protect and clean up any wire harness installation with Painless Performance PowerBraid chassis harness kits. The braided, laterally split wire wrap closes around the wire bundle without the need for additional taping or fasteners. These kits include wire ties and self-sealing electrical tape to complete the installation. Painless Performance PowerBraid kits feature everything you need in one box to professionally cover any chassis harness. Kits include: * 10 ft. of 1/8 in. diameter sleeving * 60 ft. of 1/4 in. diameter sleeving * 30 ft. of 1/2 in. diameter sleeving * 6 ft. of 1 in. diameter sleeving * 1/4 in., 3/8 in. and 1/2 in. heat shrink tubing * 140 cable ties * 1 roll of stretch and seal tape
( 59 )
$159.99
DEI Easy Loom master kits are designed to give your vehicle's engine compartment a clean, professional look—while also protecting any exposed wires, cables, and hoses. These synthetic convoluted tubing "sleeves" come in a variety of lengths and diameters for your automotive and powersports applications. DEI Easy Loom master kits features and benefits include: * Protects against abrasion, chemicals, and the elements * Superior in style and function to plastic tubing * Self-closing split design with 30 percent overlap * Resists most automotive fluids and chemicals * Peak temp rating 347 degrees F (melting point 500 F) * Approved by most car manufacturers Kit includes: * Different diameter Easy Loom sleeves * Heat shrink tube ends * Locking ties * Electrical and silicone tape
( 13 )
$108.99
For electrical systems exposed to extreme conditions, including harsh vibration, dust, water, mud, and abusive terrain, Deutsch-style connectors are the first choice of vehicle and equipment manufacturers. Now you can make your very own weatherproof connectors with our Summit™ Deutsch connector kits. Each kit includes terminals (16-18 AWG male and female, 14-16 AWG male and female), plus housing sets (male and female ends) complete with seals and wedgelocks, all packed in a handy carrying case.
( 23 )
$110.99
—
$132.99
American Autowire 250-piece professional grade terminal and connector kits are designed for builders and hobbyists alike. They include the most common terminals and electrical connectors to help you with troubleshooting, repairing, or replacing connections. All contents are compartmentalized in a durable case with a heavy-duty latching closure. The inside of the lid has a diagram detailing the contents by image and description. These kits are great to keep in the car, the garage, or both! The 250-piece kits include: * (25) 56 Series terminals (male), single 14-16 gauge, general use * (10) 56 Series terminals (male), single 12 gauge, general use * (25) 56 Series terminals (female), single 14-16 gauge, general use * (10) 56 Series terminals (female), single 12 gauge, general use * (10) 56 Series terminals (female), double 14-16 gauge, general use * (10) 59 Series terminals (female), double 14-16 gauge, headlight * (10) 59 Series terminals (female), single 14-16 gauge, headlight * (10) Pack-Con terminals (male), single 18-20 gauge, turn signal * (10) Pack-Con terminals (female), single 14-16 gauge, turn signal * (10) S10 ring terminals, single 18-20 gauge, general use * (10) M5 ring terminals (large), single 14-16 gauge, general use * (10) M5 ring terminals (small), single 14-16 gauge, general use * (10) M6.3 ring terminals, single 14-16 gauge, general use * (20) rivet terminals, single 16-18 gauge, light socket * (15) rubber sleeves, 7/64 x 3/4 * (15) rubber sleeves, 5/32 x 7/8 * (1) 8-way connector (female), general use * (1) 8-way connector (male), general use * (1) 6-way connector (female), general use * (1) 6-way connector (male), general use * (1) 4-way connector (female), general use * (1) 4-way connector (male), general use * (2) triple connectors (female), general use * (2) triple connectors (male), general use * (3) double connectors (female), general use * (3) double connectors (male), general use * (5) single connectors (female), general use * (5) single connectors (male), general use * (4) 3-way connectors (female), headlight * (4) 2-way connectors (female), headlight * (2) 3 7/8 in. connectors (female), turn signal/steering column * (2) 3 7/8 in. connectors (male), turn signal/steering column * 1 pocket screwdriver/terminal pick * Heavy-duty case
( 14 )
$113.05
The safe way to add electrical accessories to any vehicle is with Painless Performance CirKit Boss Auxiliary Fuse Block/7-Circuit/Weatherproof kits. They are the first circuit isolator system available with both constant and ignition hot circuits. Instead of tapping into an existing wire or spare circuit at the fuse, the CirKit Boss kits are add-on, relay-activated fuse blocks, activated by a small wire from any ignition source. They protect bulbs, accessories, and computers from the harmful spikes that may occur in a poorly connected power supply. The kits include the following weatherproof components: an in-line circuit breaker, relay, and relay/fuse block base with pre-terminated harness, heat-shrinkable terminals, fuse block cover, and the mounting hardware. Painless Performance CirKit Boss kits protect your OEM warranty and they are quite easy to install. Additional information for CirKit Boss kits: * All CirKit Boss units are made using TXL cross link polyurethane wire rated to 275 degrees at 600 V * Safely adds ignition hot and constant hot circuits * Circuits are individually fused * All wires are machine-terminated for reliability * Fuse style ATO/ATC
( 31 )
$129.99
Electric-Life power window switch kits come in a variety of different styles. This allows you to chose a switch that best complements your vehicle's interior.
( 75 )
$137.70
—
$219.99
The long wire runs of an electric pump installation can sometimes result in a voltage drop at the pump. Holley fuel pump relay and harness kits offer good insurance that the fuel pump will be receiving full voltage from the battery. The kits can be used with any electric fuel pump, as long as the current load is not above 30 amps. They work with 12, 16 and 24 V systems and come equipped with 12 AWG that provides extra current-carrying capacity with minimal voltage loss. A 30 amp relay is included with a relay socket wired with extra-long leads specifically designed to reduce the number of splices required. Quality insulated crimp connectors are provided to make necessary splices where required and detailed installation instructions are also included.
( 8 )
$170.95
For repairs and weatherproof and vibration-resistant connections, the Pico GM Weatherpack kits will have you covered. These kits include four different type tools, grease tube, terminals, seals and housings—all safely enclosed in a metal case with divided compartments to keep everything organized.
( 2 )
$217.99
Use Painless Performance remote master disconnect kits to easily disconnect your battery with a simple toggle switch. Each kit uses a small toggle switch to activate a 250 amp continuous duty solenoid instead of a big dirty battery mounted switch.
( 46 )
$125.99
American Autowire 429-piece Professional Grade Weatherpack terminal and connector kits are designed for builders and hobbyists alike. Much like their other terminal and connector kits, this Weatherpack version provides plenty of connection options that will help with repairing, troubleshooting, or replacing connections. All part contents of these kits are compartmentalized in a durable case with a heavy-duty latching closure. The inside of the lid of case has a diagram detailing the contents by image and description for easy selection. American Autowire 429-piece Professional Grade Weatherpack terminal and connector kits are great to keep in the car, in the garage, or both! A terminal removal tool and 25 cavity plugs are also included in this 429-piece Weatherpack kit.
( 1 )
$141.55
Holley J2A, J2B, J3, J4 connector and pin kits are designed for use with your Holley Dominator EFI system. These kits include four connectors and pins for the connectors.
Not Yet Reviewed
$219.95
American Autowire universal relay kits let you take a load off. American Autowire kits are available for a variety of applications, from hot start to brake relays, anti-theft to fan relays, and more. Many come complete with extra terminals and complete instructions; plus, they offer waterproof models, too! Get full power transfer and less strain for high-amperage accessories with any one of American Autowire's universal relay kits.
( 42 )
$122.55
Protect and clean up your underhood wire harness installation with Painless Performance PowerBraid fuel injection harness kits. The braided, laterally split wire wrap closes around the wire bundle without the need for additional taping or fasteners. These kits include wire ties and self-sealing electrical tape to complete the installation. PowerBraid kits feature everything you need in one box to professionally cover any fuel injection harness. Kits include: * 23 ft. of 1/8 in. diameter sleeving * 50 ft. of 1/4 in. diameter sleeving * 12 ft. of 1/2 in. diameter sleeving * 3 ft. of 3/4 in. diameter sleeving * 8 ft. of 1 in. diameter sleeving * 1/4 in. heat shrink tubing * 150 cable ties * 1 roll of electrical tape * 1 roll of stretch and seal tape
( 4 )
$134.99
Painless Performance CirKit Boss Heavy-Duty Auxiliary Fuse Block/7 Circuit kits allow for the addition of seven fused circuits to your already existing factory fuse block. Simply mount the fuse block and relays, route the large 6-gauge wire to the battery, route the ignition wire, and then route the seven accessory circuits to the accessories needing power. The main power wire is 8 ft. long from fuse block. Each accessory circuit has 8 ft. of wire length from fuse block. The CirKit Boss kits are add-on, relay-activated fuse blocks, activated by a small wire from any ignition source. They help protect bulbs, accessories, and computers from the harmful spikes that may occur in a poorly connected power supply. These CirKit Boss kits include two 70 amp SPST relays, two relay bases/fuse block harnesses, and crimp-on terminals, along with the mounting hardware. Additional information for CirKit Boss kits: * All CirKit Boss units are made using TXL cross link polyurethane wire rated to 275 degrees at 600 V * Safely adds ignition hot and constant hot circuits * Circuits are individually fused * All wires are factory machine-terminated for reliability * Fuse style ATO/ATC
( 1 )
$158.99
On Sale
You already have the wire and Holley EFI ECU connector kits have the rest of what you need to rewire your EFI installation. Fully terminate your own custom main harness with Holly EFI ECU connector kits. Features include: * Pre-terminated J1A/J1B Tyco Superseal connectors * 20 to 22 gauge pre-terminated wires * 16 to 18 gauge pre-terminated wires * Cavity plugs
( 3 )
$112.95
—
$158.95
Painless Wiring relays and relay kits enable you to make simple updates or replacements in your vehicle. From lights to fans to starters, Painless has a relay for you. Easy to install in most vehicles, these kits include all necessary wiring and connectors. Order the amp rating and terminal options needed for your application.
( 33 )
$145.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
