Availability
Showing In Stock Items. Show All 7 Items.
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
—
$2,505.95
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,222.95
FAST EZ-EFI 2.0 LS self-tuning engine control systems are the easiest way to get your LS transplant up and running without the complex PCM flashing and harness reworking required with the stock computer. These kits feature all of the advantages of the award-winning EZ-EFI 2.0 ECU; plus, they also include the EZ-LS ignition controller and use stock or aftermarket LS injectors, sensors, and coil packs. Each FAST EZ-EFI 2.0 system utilizes an easy-to-use interface through the included touch screen hand-held and doesn't require a laptop or tuning experience. After initial setup, the hand-held can be used as a digital dash with the included suction cup window mount. The EZ-EFI 2.0 system actually tunes itself as the user drives—and because it keeps tuning, future engine upgrades are a breeze, meaning that expensive trips to the shop for simple tune changes are a thing of the past. A purpose-built, OEM-quality wiring harness is included in each kit, as well. It features a clean, mesh wrapping that dramatically improves engine aesthetics over the factory harness. FAST EZ-EFI 2.0 LS self-tuning engine control systems are compatible will all LS-based car and truck engines.
( 5 )
$1,979.95
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
Superchips Flashcal and Amp'D throttle booster power switch kits pair a dynamic duo that will wake up your vehicle's laggy pedal feeling after that tire/lift upgrade. With these performance bundles, your truck or Jeep will have the most popular tire/gear calibration features along with six throttle sensitivity settings that can be switched on-the-fly. Features and benefits of the Flashcal and Amp'D throttle booster kits: * Corrects speedometer for tire upgrades between 26 in. and 42 in. (vary by application) * Speedometer recalibration for gear/axle swaps (vary by application) * Reads and clears diagnostics trouble codes * Digital battery voltage display * Real-time data logging * Real-time data monitoring * TPMS options (vary by application) * Improves throttle sensitivity * Faster acceleration from a stop, and throughout the rpm band * Quicker spool-up * Push button control to activate six throttle sensitivity levels * The six modes: Stock, low—50 percent, medium—75 percent, high—100 percent, valet, and 400 percent "Wow Mode"
Not Yet Reviewed
$633.95
—
$699.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
