Computers, Chips & Programmers Ignitions & Electrical

Holley Terminator X Engine Control Modules

Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

Not Yet Reviewed

$870.95

FiTech Ultimate TPI Standalone ECUs

FiTech Ultimate TPI standalone ECUs bring an old GM TPI-controlled engine (L98, LB9) into modern times. These standalone EFI kits plug into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, FiTech Ultimate TPI standalone ECUs deliver new life into the GM TPI engine.

4.9 out of 5 stars ( 10 )

$847.00

—

$954.00

On Sale

DiabloSport inTune 3 GM E90/T93 Unlock Kits

The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 8225-R kit includes an industry-leading inTune 3 handheld tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the inTune 3 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. Get power you can feel—with DiabloSport! DiabloSport inTune 3 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck!

3.67 out of 5 stars ( 3 )

$870.95

$782.95

HP Tuners VCM Suite MPVI4 Credit Pro Packages

HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender

4.33 out of 5 stars ( 6 )

$799.91

DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems

DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting

4.67 out of 5 stars ( 3 )

$869.99

Edelbrock TC Transmission Controllers

Edelbrock TC transmission controllers are offered as a standalone system to work with Pro Flo 4, most aftermarket fuel injection systems and carbureted applications utilizing a TPS sensor. Features: * Transmission control over shift points, firmness, speed, torque converter lock up, shift table, speedometer calibration and line pressure * Edelbrock TC Tuner calibration app (available for both Android and Apple devices) and optional 7 in. touchscreen Bluetooth tablet for setup, adjustment and visual display * Easy install with compact housing and clean-look wiring harness * Includes base calibrations for a plug-and-play setup * Compatible with carbureted applications utilizing a standalone throttle position sensor * CAN bus communication for functionality with all Pro-Flo 4 systems and most aftermarket EFI systems * Also, allows you to change the final drive ratio, tire diameter, and transfer case ratio

2.5 out of 5 stars ( 4 )

$864.95

—

$910.95

On Sale

Edge Evolution CTS3 Programmers

The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable

3.53 out of 5 stars ( 15 )

$870.95

—

$1,075.95

$782.95

—

$967.95

Summit Bucks

FAST EZ-EFI Self-Tuning Engine Management Systems

Fear not, fuel injection fans! FAST has just made it easier than ever to convert your engine from a carburetor to fuel injection, using these FAST EZ-EFI Self-Tuning engine management systems. The most important feature is the self-tuning operation that does not require chasing components, expert tuning experience, or a laptop computer to tune. Simply hook them up, answer the basic Wizard setup questions on the included hand-held display, and the systems truly tune themselves. FAST EZ-EFI Self-Tuning systems include a wide-band oxygen sensor and wiring harness.

3.33 out of 5 stars ( 3 )

$801.95

On Sale

DiabloSport Trinity 2 GM E90/T93 Unlock Kits

The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 9225-R kit includes an industry-leading Trinity 2 on-dash tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the Trinity 2 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. And it doesn't stop there with T2. The full color, 5 in. touch screen allows you to keep an eye on all your vital engine data. The on-screen gauges deliver all the info you want to see, in real time. Of course, it can also record data for playback on our DV2 software for further analyzation. T2 also enables you to set up virtual alerts, and supports the Expandable Accessory System (EAS) for adding and logging additional external sensors. The device is internet updateable, either through DiabloSport's Update Agent software or through its built in WiFi. Get power you can feel—with DiabloSport! DiabloSport Trinity 2 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Full-color 5 in. touch screen * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck! * Customizable gauge layouts and background images * Supports DiabloSport's Expandable Accessory System * Includes windshield mount

Not Yet Reviewed

$972.95

$874.95

On Sale

Edge EZ+Insight CTS3 L5P Duramax Kits

Edge's EZ+Insight CTS3 L5P Duramax kits provide "EZ" power for your Duramax diesel paired with their Insight CTS3, giving you more control with added features, like the ability to read and clear trouble codes, perform a manual DPF Regeneration cycle, and of course, monitor everything going on under the hood. Get peace of mind with the data Insight provides real-time through a state-of-the-art color touch screen. Watch live data, like EGTs, boost, rail pressure, soot levels, DPF status, and even distance since your last regen. Edge EZ module makes a massive improvement in drivability without sacrificing longevity or the reliability of your emissions equipment. Their intuitive smartphone app offers on-the-fly tuning adjustments over five specific calibrations, and to further enhance your driving experience, each of the five power levels can be adjusted to run one of seven throttle pedal settings giving you the control over throttle feel, eliminating pedal lag. For extra value and savings, purchase an Edge EZ + Insight kit to give your L5P exactly what it needs.

Not Yet Reviewed

$999.95

$898.95

COBB Tuning Subaru Accessport V3 Programmers

COBB Tuning Subaru Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Subaru ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Subaru Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport * Accesstuner: Create custom calibrations using Accesstuner software; for modifications beyond COBB Stage Power Packages, custom tuning may be required. Subaru specific features (availability varies by model): * Realtime Tuning: Make changes to the map in real time, while the engine is running; speeds up the tuning process and allows quick changes to features like launch control and map switching * Launch Control: Set RPM threshold for performance launches; builds boost and generates instant horsepower off the line * Flat Foot Shifting: Keep the throttle on the floor and maintain boost between gears with this customizable RPM setting *Adjust Idle: Adjust idle on the fly to compensate for aftermarket parts; separate menus allow adjustment for A/C on and off * Adjust Timing (select STIs only): Globally reduce timing on the fly to compensate for poor-quality pump fuel * Launch Mode (some Forester XTs and WRX CVTs only): Allows manipulation of OE torque limiters to build boost and generate horsepower when launching; driver-controlled

4.5 out of 5 stars ( 4 )

$770.00

Banks Power Derringer iDash 1.8 DataMonster Tuner Systems

Banks Power Derringer iDash 1.8 DataMonster tuner systems are designed to be the smartest and safest way to add hp/torque to your diesel-powered vehicle. The microprocessor-based electronics safely optimize the same data input calibrations as your engine's ECU—and they do so in real time via an inline sensor connection and the OBDII port; no other competitor does that! Derringer tuners are equipped with a special coolant temperature watchdog that will disengage extra power when the engine is too cold/hot. They will also auto-adjust power when bad fuel starts to cause knock. Don't get stuck in "limp home" mode with other tuner systems; run with a Banks Power Derringer iDash 1.8 DataMonster tuner system. Features, items, and specs may include: * DataMonster displays up to eight parameters (per gauge) and can log up to 100 at a time * Performance logs and custom alerts available * Simple plug-and-play installation (easy removal for dealer service) * Works with cruise control engaged * Multiple power levels with on-the-fly level changing (with switch) * ActiveSafety (on select models) protects engine/powertrain * Easily concealable compact housing for the electronics * Warranty friendly—no reflash; no ECU traces * Expandable with other Banks Bus products * Value-priced, and loaded with many more great features

5.0 out of 5 stars ( 1 )

$889.00

BangShift Billy Digital Clutch Controllers

BangShift Billy offers digital clutch controllers for Ford Mustang and universal applications. These devices are designed for the perfect, repeatable launch for drag racing—in other words, consistency and reduced carnage! * What's the problem with drag racing with a street style diaphragm clutch? One of three things: -- You're either going to spin the tires when you launch the car if you don't the slip just perfect with your foot. -- You're going to break parts. -- It's going to bog, then accelerate down the track. That kills your E.T. and all that you're going after, which is going faster. With the BangShift Billy, you can have the consistency and launching characteristics of an adjustable "slipper" clutch without crawling under the car or even picking up a wrench. You can make those adjustments to your diaphragm clutch through the BangShift app on your phone. It's adjustable down to the millisecond! * Here's what's included: -- Manifold assembly with the valve -- Simple wiring harness -- Bluetooth controller, which is controlled by an app on your phone -- Problem-solving clutch bleeder kit

Not Yet Reviewed

$875.00

COBB Tuning Volkswagen Accessport V3 Programmers

COBB Tuning Volkswagen Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Volkswagen ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Volkswagen Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport * Accesstuner: Create custom calibrations using Accesstuner software; for modifications beyond COBB Stage Power Packages, custom tuning may be required. Volkswagen specific features (availability varies by model): * Adjustable Traction Control: Adjust target slip on the fly and maximize tire grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level between 3000 and 8000 RPM; enabled in COBB OTS maps * Launch Control: Adjust on the fly with six pre-configured RPM slots to dial-in based on track conditions and vehicle configuration; enabled in OTS Maps and configurable within Accesstuner Pro

5.0 out of 5 stars ( 1 )

$770.00

Chevrolet Performance Engine Controllers

Chevrolet Performance engine controllers are individual units for your LS crate engine. They are identical to those included in their kits. Maintain the intellect of your Gen III/IV LS or Gen V LT-powered project vehicle with the "brains" designed to work flawlessly--Chevrolet Performance engine controllers.

5.0 out of 5 stars ( 1 )

$752.84

Ford Performance Parts 2019-20 Ranger Power Packs

The Ford Performance calibration for 2019-20 Ranger Ecoboost is a 50-state legal calibration that increases power and improves driveability throughout the RPM range. This kit is Ford Performance-engineered and dyno-tested and improves driveability and throttle response throughout RPM range and features an optimized shift schedule. You can expect a horsepower gain of 45 hp @ 4,500 rpm and torque gain of 60 lbs.-ft. @ 2,500 rpm. USA and Canadian vehicles come with a Ford Performance 3-year or 36,000 mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician. Tire size configurable up to 265/70/17, as recommended with the M-18000-R Ranger Off-Road Suspension Leveling Kit. This calibration is only compatible with premium fuel. Power Pack also includes: * Ford Performance Pro Cal 4 calibration delivery tool M-12655-F * Ford Performance high-flow K&N air filter

4.75 out of 5 stars ( 4 )

$772.99

Dorman Remanufactured Power Modules

Dorman remanufactured power modules combine the fuse block functions and the front control module. These totally integrated modules are fully remanufactured and vehicle simulator-tested for quality assurance. There is no programming required and the installation is an easy plug and play. Count on Dorman remanufactured power modules to keep you on the road.

4.56 out of 5 stars ( 36 )

$779.99

—

$877.95

On Sale

DiabloSport Trinity 2 Unlock and Tune Kits

Unlock and tune your truck in your driveway with DiabloSport Trinity 2 kits. GM gas trucks have been locked down since their introduction, but DiabloSport's Trinity 2 unlock and tune kits provide tuning solutions that include the on-dash tuner, along with the locksmith device and harnesses required to unlock the ECM in your truck. Once unlocked, Trinity 2 offers tunes for 87, 91, and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, the kits offer a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable. DiabloSport has also added some features for drivers of these newer GM trucks, like the ability to recall your last mode setting or to retain your auto-start-stop setting. Get power you can feel, with DiabloSport! Choose the kit designed for your truck. Trinity 2's full color 5 in. touch screen allows you to keep an eye on all your vital engine data with on-screen gauges delivering all the info you want to see, in real time. T2 can record data for playback on DiabloSport's DV2 software for further analyzation, allow you to set up virtual alerts, and will support their Expandable Accessory System (EAS) for adding and logging additional external sensors. Trinity 2 is internet updateable, either through DiabloSport's Update Agent software, or through its built in Wi-Fi Additional notes and benefits: * Throttle boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 in. to 38 in.) * Calibrate speedometer for gear change (3.42 to 5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased rpm range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * Keep Drive Mode Setting allows you to select a drive mode and it will remember that mode next time you start the truck

Not Yet Reviewed

$972.95

$874.95

On Sale

DiabloSport inTune i3 Platinum PCM Swaps

DiabloSport inTune i3 Platinum PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They, too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or more. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.

3.5 out of 5 stars ( 2 )

$849.95

$763.95

COBB Tuning Ford Accessport V3 Programmers

COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group

4.29 out of 5 stars ( 7 )

$770.00

On Sale

Edge Revolver with Insight CTS3 Programmers

The six-position Edge Revolver for Ford 7.3L Power Stroke diesels can now be controlled by the Insight CTS3 programmer! Change the power levels of your chip using the touch screen on the Insight CTS3. The new combo kits will include the Revolver chip, Insight CTS3, and the EAS Revolver cable that allows the Insight to connect to the chip. The six-position chip offers adjustable performance, up to 140 hp, using Edge's Insight CTS3 display. With the EAS Revolver Cable installed, the Insight CTS3 will recognize the EAS switch, allowing you to view the new power level screen with the Up/Down adjustment buttons and display what power level you're in. This new screen allows switching between multiple power levels on-the-fly as easy as one-touch! Order the model recommended for your application. Edge Revolver with Insight CTS3 Programmer features: * Most comprehensive, state-of-the-art, multi-gauge touch screen display on the market * Plug-in performance chip to operate with your specific 7.3L box code * Shift-on-the-fly power levels with the Insight CTS3 * Full in-cab, state-of-the-art digital gauges * Up to six options for performance and other various modes * Calibrations for your specific year, make, model, and transmission * Up to 140 hp and 250 lbs.-ft. torque * Increase fuel economy, towing power, and overall performance * Built-in performance meter measures 0-60, 1/4 mile times, etc. * Clear and Read DTC codes * Easy installation

Not Yet Reviewed

$849.95

$763.95

—

$799.95

COBB Tuning Ford Stage 1 Plus Power Packages

COBB Tuning Ford Stage 1 Plus power packages bundle the most flexible engine management solution with more clean, cold air to boost your vehicle's power and performance. Ford Stage 1 kits feature Accessport V3 that unlocks your vehicle's potential by replacing conservative factory settings with aggressive calibrations. To that COBB adds one of their cold air intakes (some are carbon fiber) with reusable, high-flow air filters to increase airflow. Finally, most of the Ford Stage 1 Plus power packages (Mustang Ecoboost not included) are completed with machined aluminum rear motor mounts to improve the traction of all that new found power. Upgrade your Ford Focus, Fiesta, or Mustang with COBB Tuning Stage 1 Plus power packages.

Not Yet Reviewed

$970.00

Dorman Remanufactured Totally Integrated Power Modules

Dorman remanufactured totally integrated power modules require no programming. They restore your vehicle's electrical system to original operation, regulating proper voltage distribution to functions you invariably rely upon, including the windshield wipers, the headlamps, the radio, the climate control and much more. Made from high-quality materials to meet or exceed OE power modules.

4.37 out of 5 stars ( 30 )

$770.95

—

$973.99

On Sale

Superchips Dashpaq Plus Computer Programmers

Superchips Plus computer programmers deliver a dynamic blend of innovation paired with safety, simplicity, and assurance. With hundreds of gas vehicles covered, you can count on impressive power gains, improved mpg potential, and superior drivability. Dashpaq Plus includes high-definition screens, upgraded processor for quick read/write speed and monitor refresh rates, along with several innovative features, like Wi-Fi, multiple vehicle license options, and the ability to load custom tunes using DiabloSport CMR software. Additional features and benefits include: * Sharp, high-definition, 5 in. color touch screen * Pre-loaded tunes for performance, tow, economy, and more * Tap-and-Go quick navigation options to easily pull up your favorite options or gauge layout * Calculated data parameters (PIDs) including boost, horsepower, and torque ratings * Speedometer and rev limiter options * Manual entry options for tires, gears, and more * Virtual drag trip * Extensive data-logging capabilities with option to export and view on DataViewer software * Compatible with the Expandable Accessory Systems (EAS) sensors to monitor more parameters * Read and clear diagnostic trouble codes * Manage gauge art colors, set warning and alert thresholds, and customize your screen layout * Wi-Fi updates * Add additional vehicle licenses to tune multiple vehicles via Internet Update Software

4.25 out of 5 stars ( 8 )

$921.95

$767.95

—

$870.95