Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
18 Results Found For "transmission"
Showing In Stock Items. Show All 25 Items.
Not Showing Customizable Items. View Customizable Items.
On Sale
Holley Terminator X MAX GM 6L80/90 Transmission Kits
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$587.95
$528.95
Superchips Flashpaq F5 Pro Tuners
Superchips Flashpaq F5 Pro tuners put your vehicle's tune in your hands. These handheld devices read stock vehicle files and load custom-tuned files built through HP Tuners custom tuning software (there are no pre-loaded tunes). Find your favorite HP Tuners dealer and work with them to build the perfect tune for your setup. F5 Pro devices will hold up to four custom tunes and monitor/log up to eight vehicle PIDs. No matter what aftermarket parts you've installed, you can deliver power levels designed specifically for the upgrades you have added to your ride. Superchips Flashpaq F5 Pro tuners feature high-definition color screens and were designed with simplicity and functionality in mind—making it easier than ever to select your custom power level and have instant horsepower gains and drivability improvements!
( 8 )
$649.95
FiTech Ultimate LS Standalone ECUs
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$567.00
Edge Evolution CTS3 Programmers
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 15 )
$749.95
DiabloSport Pulsar XT Power Modules
DiabloSport Pulsar XT Power Modules are an all-new take on drivability and calibration for your 5.7L Ram Hemi. Unlike any other device on the market, Puls0ar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced and easiest way to disable your V8's MDS system to eliminate 4-cylinder mode and keep that Hemi running on all 8, all the time. The built-in throttle pedal sensitivity control also helps you fine-tune your pedal feel to eliminate throttle lag and make your Hemi drive like you want it to. Why spend thousands on different devices and hope they'll work together when Pulsar XT does it all in one simple 15-minute install with state-of-the-art smartphone app control. Enjoy Pulsar XT's shift-on-the-fly pedal programming, with seven levels changeable through your steering wheel controls. The smartphone app allows you to adjust your speedometer for larger tires, transfer case ratio changes, and gear ratio changes—along with adjusting TPMS settings, disabling your Auto Start/Stop, and checking and clearing DTC's. You'll love the way your Ram Hemi reacts with Pulsar XT, with improved throttle response, tire size calibration, and improved drivability running in V8 all the time. (Fits new body style E-Trq and Non E-Trq models.) Additional details: * Disable multi-displacement system to maintain V8 all the time (MDS) * User adjustable throttle booster settings (7 pre-set levels plus factory) * Calibrate for tire sizes 28-40 in. (any size entered above 33.9 in. may disable Park Sense and Blind Spot Monitoring, in some applications) * Improves throttle response and drivability * Disable Engine Auto Start/Stop * Adjust TPMS warning threshold (25-99 psi) * Gear ratio adjust for 2.73-5.38 * Read and clear DTC's * Smartphone app control for Android and IOS * Check emissions readiness status * Enable transmission gear display in Drive Mode * Enable/disable traction control kill * Remember previous Tow/Haul setting on start up *This device is not a power adding device, it is not changing ECM calibrations, and is easily removed for dealer service
( 3 )
$511.95
Superchips Flashpaq Tuners
Superchips Flashpaq tuners will optimize both engine and transmission calibration throughout the entire powerband. They're effective from part-throttle through wide-open throttle. Features include: * Internet updateable * Built-in diagnostic trouble code definitions * Built-in help screens * USB communications * Custom application upgradeable * Multiple tuning levels * Increased user options for more control * Ergonomically-designed case * Large, soft key buttons * Permanently mounted cable * 300 percent larger screen * Backlit screen for easy-to-read night use
( 99 )
$511.95
—
$749.95
Range Technology Pulsar LT Modules
Range Technology Pulsar LT modules offer complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT affords you the ability to adjust throttle response, tire size, gear ratio, TPMS, and can be used to disable Auto Start/Stop. It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Select the Range Technology Pulsar LT module designed for your vehicle. Features: * Disable Active Fuel Management and Dynamic Fuel Management (AFM/DFM) * Disable Auto Start/Stop * Calibrate speedometer for larger tires * Speed limiter adjustment * Adjust TPMS settings * Modify gear ratio * Clear DTCs * Throttle booster with on-the-fly adjustment * Manual DPF regeneration * Engine idle up * Transmission relearn Note: Features vary by vehicle model/engine.
( 1 )
$562.95
—
$716.95
Edge EvoHT2 Programmers
The EvoHT2 is a premium hand-held performance tuner from Edge Products. The new handheld tuner was designed specifically to give you the most power at the best price, with industry-leading service and quality that comes standard with every Edge product. Now with a color screen, upgraded processor, and numerous new features, you literally hold the power to unlock the hidden potential of your truck or SUV's power and fuel economy in the palm of your hand! Edge EvoHT2 features: * Fuel economy and towing capability improvements * Installs in minutes with no tools required * Speedometer calibration for axle gear and tire size changes * Advanced tuning selections from rev limits to shift points * Monitor engine and transmission parameters * Read and clear diagnostic trouble codes * Results and feature set may vary based on vehicle make, model and aftermarket upgrades on the vehicle. Read all instructions before installation and/or operation of this product.
( 4 )
$536.95
Ford Performance Parts 2015-17 Mustang GT Power Pack 2 Performance Packages
For a difference you can hear and feel, Ford Performance Parts 2015-17 Mustang GT Power Pack 2 performance packages should be at the top of your list. Featuring Ford proprietary software and engineering, with calibrations available for manual and automatic transmissions, these kits allow gear ratio changes up to 4.09:1. Additional features: * GT350 cold air intake * 87mm throttle body with exclusive intake adapter * Open air filter with industry exclusive 50-state legal CARB E.O. * 21 hp and 24 lbs.-ft. peak gains over stock * 40 lbs.-ft. gain at 1500 rpm * Automatic calibrations feature optimized performance shift schedule * Exclusive no-lift shift strategy and enhanced throttle response * 91 octane or higher fuel required
( 28 )
$743.99
COBB Tuning Mitsubishi Accessport V3 Programmers
COBB Tuning Mitsubishi Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Mitsubishi ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded OTS maps or use custom-mapping for any modification level. NOTE: Off-the shelf (OTS) maps are available for US domestic market Evolution X models only. Other market vehicles are supported but will require custom tuning. COBB Tuning Mitsubishi Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Mitsubishi specific features: * SST Logging: Log SST transmission data to diagnose mechanical issues or improve transmission characteristics; transmission can be logged simultaneously with engine Note: SST logging is limited to Evolution X MR and Lancer Ralliart applications.
Not Yet Reviewed
$560.00
Ford Performance Parts 2021-23 2.3L Bronco Performance Calibrations
Enhance the performance of your 2.3L engine in your 2021-23 Bronco. The Ford Performance engineered and dyno-tested calibration delivers more power and increased performance without sacrificing reliability. Additional details: * Improved throttle response throughout RPM range * Optimized shift schedule for automatic transmission equipped vehicles * Down-shift rev matching for manual transmission equipped vehicles * Peak torque = 385 lbs.-ft. at 3,500 rpm * Peak power = 330 hp at 5,500 rpm * Ability to change tire size up to BFG 37x12.5R17 KO2 size (579 revolutions per mile); additional modifications required * Ability to change axle/FDU ratio up to 5.38 * Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module * For U.S. and Canadian vehicles * M-12655-F ProCal 4 delivery tool included * Premium fuel required * The M-9603-B27 calibration is also available --- Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur. --- ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
Not Yet Reviewed
$730.99
Ford Performance Parts 2018-23 Mustang 2.3L EcoBoost Performance Calibration Kits
Ford Performance Parts offers performance calibration kits for 2018-23 Mustang 2.3L EcoBoost cars with manual or automatic transmissions (not for use with 2020-23 2.3 HO). The programmers enable horsepower and torque gains throughout the powerband—35 hp peak gain at 2,900 rpm, and 76 lbs.-ft. torque peak gain at 2,600 rpm. Additional product details: * Exclusive Ford Performance warranty when dealer installed * 50 state legal with CARB EO (D-752-17) * Automatic calibrations feature optimized performance shift schedule * Powertrain calibrations are developed and supported for U.S. and Canadian vehicles * Premium (91 octane or higher) fuel only * Horsepower and torque gains will not be optimized until fuel octane is learned Kit includes: * Pro Cal 4 calibration delivery tool * Ford Performance high-flow performance air filter * Calibration voucher
( 2 )
$735.99
DiabloSport Trinity 2 EX Platinum Performance Programmers
DiabloSport Trinity 2 EX Platinum Performance programmers are game-changers! Trinity (T2) EX units are extremely capable performance tuners and feature-packed monitor/data logger devices—offering the best of both worlds. They feature an impressive, high-resolution 5 in. capacitive touchscreen, full swipe functionality, and industry-leading gauge designs; plus, jaw-dropping power potential and a powerful, yet simple user interface. DiabloSport Trinity 2 EX Platinum Performance programmers feature: * Full-color, high-definition 5 in. touchscreen * Lightning fast read/write times * Performance tuning for mileage, towing, daily driving, and performance * One-Touch, easy menu navigation * Full data-logging capability * Read and clear diagnostic trouble codes * Multi-vehicle licenses available * Correct speedometer and adjust speed/rev limiters (Options, features and coverage may vary, based on vehicle application) * AFM/MDS active fuel management options (Options, features and coverage may vary, based on vehicle application)
( 33 )
$727.95
DiabloSport Trinity 2 EX Performance Programmers
DiabloSport Trinity 2 EX Performance programmers are game-changers! Trinity (T2) EX units are extremely capable performance tuners and feature-packed monitor/data logger devices—offering the best of both worlds. They feature an impressive, high-resolution 5 in. capacitive touchscreen, full swipe functionality, and industry-leading gauge designs; plus, jaw-dropping power potential and a powerful, yet simple user interface. DiabloSport Trinity 2 EX Performance programmers feature: * Full-color, high-definition 5 in. touchscreen * Lightning fast read/write times * Performance tuning for mileage, towing, daily driving, and performance * Up to an additional 100 hp and 250 torque on diesel applications; 90 hp and 90 torque on gas * One-Touch, easy menu navigation * Full data-logging capability * Read and clear diagnostic trouble codes * Multi-vehicle licenses available * Correct speedometer and adjust speed/rev limiters (Options, features and coverage may vary, based on vehicle application) * AFM/MDS active fuel management options (Options, features and coverage may vary, based on vehicle application)
( 9 )
$727.95
Edge Gas Evolution CS2 Programmers
A better design--Edge Evolution CS2 programmers for gasoline-powered vehicles have advanced looks and features to wake up your rig's performance and style. Not only that, but these super-sleek, in-cab monitors and programmers deliver the best bang for your buck! Evolution CS2 units will retune your ride with multiple power levels created by a team of engineers to increase horsepower and torque. You can install them in minutes without popping your hood, and they mount in your cab for continuous real-time monitoring of vital engine data, delivering a complete gauge package. The full-color, high-resolution, button-controlled screens are easy to view, easy to use, and offer high-tech looks. Introduce Edge innovative DNA into your rig's computer through their Evolution CS2 programmers and grow your truck's performance in many ways.
( 14 )
$511.95
Dorman Remanufactured Powertrain Control Modules
Dorman's remanufactured powertrain control modules offer original equipment performance for less than the cost of a new ECM from the dealer. The engine control module processes inputs from various sensors to control the engine's ignition and fueling for optimum performance and efficiency. Each ECM is quality-remanufactured and has been fully tested to ensure durability and functionality, including hot and cold chamber testing to meet original equipment performance. Order the module for your application.
( 4 )
$505.99
On Sale
FuelTech FT450 EFI System
FuelTech FT450 EFI systems work with the ECU electronic injection system in a wide range of vehicles. They act as an engine monitoring and control system for your electronic fuel injection with their integrated instrument panel, data acquisition, and power management capabilities. Modify your injection setup for the performance you want with a FuelTech FT450 EFI system.
( 1 )
$999.00
$699.00
DiabloSport inTune i3 Platinum PCM Swaps
DiabloSport inTune i3 Platinum PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They, too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or more. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 2 )
$716.95
