Availability
Showing In Stock Items. Show All 50 Items.
Keep your Tuff Stuff Performance alternators power-perfect with service help from a Tuff Stuff alternator repair kit. These small parts and/or bearings kits are intended for specific alternator models. Proper maintenance can deliver like-new performance to power your vehicle's electrical components. Order the repair kit recommended for your unit.
( 20 )
$37.99
—
$42.99
Wire up maximum voltage with Summit Racing™ alternator wiring kits. They include copper-core wire and connectors. If your alternator is putting out the amps, then you need to upgrade your wiring to Summit Racing™ alternator wiring kits—available in lengths and wire gauges to accommodate a variety of alternator amperages.
( 97 )
$20.99
—
$32.99
Give your vehicle the power source it needs with Holley alternator pigtails. These weatherproof plug and wire pigtails are designed for select Holley alternators or similar Delco AD-style alternators. They're fairly easy to install--just connect the yellow wire to switched voltage that is "on" when the key is in the run position. These pigtails have a resistor inline, so a charge indicator light is not required. However, if the vehicle has a charge indicator light, the yellow wire can be connected to it and the light will function. So, for high-amp, high-torque solutions for some of today's toughest applications, give Holley a go!
( 40 )
$25.65
Painless Performance alternator wiring kits are specifically designed for vehicles that demand serious power and are a must if you're upgrading your alternator. They are designed to handle more power from the start to ensure you can keep that hotrod or heavy duty truck on the road where it should be. Don't risk upgrading your alternator without upgrading your wiring, get your Painless Performance alternator wiring kits.
( 47 )
$21.99
—
$34.99
Install your high-output alternator with American Autowire connection kits. In most cases, your factory wiring chassis harness has only been set up for a factory alternator (100 amps or less). American Autowire high-output alternator connection kits assist in converting to a high-amperage alternator. Kits vary with different wiring, terminals, boots, and more. Detailed instructions are also included in kits to help facilitate the installation.
( 20 )
$46.55
Our Summit Racing™ one-wire alternator conversion kits will give your engine compartment a much cleaner look. These kits include a new voltage regulator, brush holder, hardware, and easy-to-follow instructions.
( 11 )
$47.99
Don't risk upgrading your alternator without upgrading your wiring--use Powermaster alternator wiring kits. The OEM wire from your alternator to your vehicle originally was not designed to carry the additional load of a higher amp alternator. Powermaster alternator wiring kits are designed to handle more power from the start to ensure that your ride gets the power it craves and keeps it. Give your ride the power it deserves with Powermaster!
( 9 )
$22.79
—
$32.79
Yuasa battery hardware kits are available in a variety of lengths and styles to fit specific battery applications. Secure your battery cables with the nuts, bolts, and spacers designed for your Yuasa battery.
( 6 )
$20.99
Powermaster offers charge wires in various lengths and gauges because the connection between the alternator and the battery is very important. An undersized charge wire could result in voltage loss, so make the right choice. Powermaster charge wires use fine-stranded, highly flexible neoprene cable that will energize your battery every time.
( 26 )
$30.79
—
$56.99
Tuff Stuff Performance heavy duty charge wires offer various lengths and gauges because the connection between the alternator and the battery is very important. An undersized charge wire could result in voltage loss, so make the right choice.
( 16 )
$30.99
—
$50.99
Ground wires to the alternator are just as important as the charge wire. Make sure your alternator is properly grounded with Powermaster ground wires. Their selection offers several gauges and lengths with copper wire cores, and assembled with a 5/16 in. battery eyelet and a 3/8 in. alternator eyelet. Choose the right fit for your vehicle.
( 3 )
$28.79
—
$52.99
Scott Drake alternator wiring harnesses are exact replicas of your factory original. They're made of high-quality copper for long-lasting performance and feature all of the correct color wires and OE-style connectors for a stock fit and finish. The replacement harnesses are available for a variety of muscle car applications from the 1960s and '70s.
( 9 )
$37.90
—
$40.09
Powermaster offers braided stainless steel ground straps to help you complete your installation and help reduce starter, alternator, and electronic equipment failures. The braided wire offers durability, flexibility, and maximum conductivity. Braided strands within the strap are woven and rolled flat to a specified width, and each end is terminated with a ring terminal. Protect your racer with proper grounding using Powermaster ground straps.
Not Yet Reviewed
$21.79
Upgrade your alternator with the assistance of Tuff Stuff Performance alternator conversion pigtails. These wiring accessories are available to convert specific GM alternators, with or without a dash indicator lamp. Choose the model needed for your application.
( 11 )
$30.99
—
$33.99
MechMan indicator light harnesses prevent the "check battery" light from coming on in the dash. Offered individually as well as supplied with all MechMan hairpin alternators for a range of GM trucks and SUVs, they accept oval GM alternator plugs. The longer blue wire gets connected to an ignition switched 12 V+ source to turn the alternator on and off with ignition and prevent the indicator light from coming on. MechMan harnesses can also be modified and hardwired to ignition 12 V+ for engine swap applications where the stock alternator harness is not available.
Not Yet Reviewed
$29.00
MechMan voltage boost harnesses increase the charging voltage by 1.0 V. Offered individually, they fit a range of GM trucks and SUVs with oval 4-pin alternator plug. The longer blue wire gets connected to an ignition switched 12 V+ source to turn the alternator on and off with ignition. These MechMan harnesses can be modified and hardwired to ignition 12 V+ for engine swap applications where the stock alternator harness is not available. NOTE: These voltage boost harnesses are NOT for use on standard 12 V AGM batteries. The modules will increase the charging voltage by 1.0 V and will swell and damage AGM batteries. Please check with your Lithium battery manufacturer to verify the proper charging voltage before installing this module.
Not Yet Reviewed
$29.00
Turn your key switch "on" and commence charging with Caspers FieldFix harnesses. The alternator plug-in wiring harnesses provide current to the field winding or the alternator whenever your key switch is turned on, eliminating the possibility of a tow truck scenario. FieldFix harnesses offer uninterrupted charging system functions for your turbo Buick or turbo TransAm. Their plug-and-play design makes them easy to install--there are no wires to cut! Add a safety system to always have a charged battery with Caspers Electronics FieldFix alternator plug-in wiring harnesses.
Not Yet Reviewed
$42.79
Need some new alternator wiring for your classic muscle car? CA alternator harnesses have you comprehensively covered. Whether you're running a 200 c.i.d. 6-cylinder, a big block 428, or something in between—these harnesses will get the amps where they're supposed to go. Bring your vintage pony car to life with a little help from the CA alternator harness designed for your application.
Not Yet Reviewed
$34.99
Alternators supply power to everything from your vehicle's battery to the electrical system. If any of the original wiring appears heat damaged or corroded, it may be time for replacement pigtails from Tuff Stuff Performance. Because alternators vary between carmakers, this selection of pigtail harnesses features an assortment of end plugs and accompanying wire options. Tuff Stuff pigtails are manufactured from high-quality materials to meet OEM specifications—performance you can rely on.
( 16 )
$24.99
—
$37.99
Rick's Motorsport offers primary coils for a variety of applications, including Suzuki ATV LT80 QuadSport models from the 1980s, '90s, and 2000s. These replacement lower-voltage windings within the ignition coil receive current from the CDI (Capacitator Discharge Ignition) box, acting as the input side of the transformer. They convert low-voltage current into high-voltage current needed to create a spark in the spark plug, igniting the fuel/air mixture in the engine cylinder. The primary coils are made from factory materials and specs to ensure proper fitment and off-road performance.
Not Yet Reviewed
$31.95
These Painless Performance remote battery junction terminal kits are a safe and convenient way to create attaching points for the firewall or trunk. They include one red positive and one black negative terminal block with 3/8 in. studs to allow for the connection of battery cables through a bulkhead.
( 14 )
$44.99
Summit Racing™ Remote Charging Post or Battery jumper terminal and bracket kits provide convenient access for recharging when using a remote mount battery, as well as assisting you to securely mount the battery charging posts. The brackets are predrilled for quick mounting to the frame or body, offering a convenient way to position posts close together for easy access to the battery for charging or jump starting. The plastic divider helps avoid shorts when attaching charging leads. Two terminals are included in kits.
( 1 )
$43.98
American Autowire Build a Battery Cable kits include two heavy-duty 0-2 gauge terminals, molded covers, and plated bolts made out of copper. These cable kits are stackable with other American Autowire bolt kits.
( 12 )
$20.90
These Odyssey SAE terminal adapter kits allow you to hook up your positive and negative battery cables to your Odyssey battery. They include two different sized posts and are tapered. The larger positive post is 0.750 in. at the base and tapers to 0.690 in. at the top. The smaller negative post is 0.690 in. at the base and tapers to 0.625 in. at the top. The Odyssey SAE terminal adapter kits are designed to fit Odyssey and other batteries with 6mm x 1.0 female terminal post threads.
( 20 )
$24.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
