Availability
Showing In Stock Items. Show All 65 Items.
On Sale
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 372 )
$31.99
—
$73.99
$28.79
—
$66.59
On Sale
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 151 )
$60.98
—
$112.98
$54.88
—
$101.68
On Sale
ACCEL points eliminator ignition conversion kits utilize specialized electronic circuitry and an infrared signal to stabilize ignition timing from 1 to 10,000 rpm and offer more accuracy. Put an end to your old-school high-maintenance system with the ACCEL points eliminator conversion kit designed for your application. More product features include: * Reduces maintenance by eliminating the need to change points * Improved performance and fuel efficiency * Latest thermal, clad-based surface-mount construction for maximum dependability * Easy to install with simple hand tools
( 50 )
$111.95
$89.95
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 70 )
$46.30
—
$90.05
$29.20
—
$67.54
On Sale
ACCEL heavy-duty distributor cap and rotor kits offer superior protection from "arc-thru" and crossfire. These caps are stress-relieved at the molding to ensure stability and feature a 60k volt-rated alkyd molding compound. Corrosion-resistant brass inserts and steel rotor springs provide high-spark energy flow for the ACCEL heavy-duty distributor cap and rotor kit designed to fit your application.
( 43 )
$52.69
$34.25
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
—
$276.95
$144.95
—
$178.95
On Sale
These curve kits allow your distributor to reach full advance more quickly (between 2,000 and 2,800 rpm), delivering maximum power and engine acceleration.
( 43 )
$16.40
$10.66
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$502.87
$318.87
On Sale
Maximize the performance of your Acura or Honda® with Acura/Honda® super tuneup kits from ACCEL. These tuneup kits consist of everything needed to put a super tuneup on your vehicle's engine. All kit components are perfectly matched to give you the best performance that your ride is capable of. Each of these precision-molded, impact-resistant kits contains a wire set with heat-reflective spark plug boots, a distributor cap and rotor with high dielectric strength, and brass contacts. These kits facilitate an easy install to get your ride revved up and raring to go.
( 12 )
$199.95
$129.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$275.95
—
$699.95
$151.95
—
$389.95
On Sale
One of the easiest ways to maximize horsepower from your Honda® or Acura® engine is to get rid of the weak stock coil mounted inside the cap. These MSD brass terminal distributor caps are specially constructed to allow the use of an external coil such as the high voltage of an MSD Blaster Coil. They also include an 8.5mm Super Conductor coil wire, crimp tool, and rotor.
( 6 )
$89.75
$49.36
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 5 )
$176.95
$97.95
On Sale
MSD Cap-A-Dapts have HEI-style posts, an adjustable rotor to allow proper phasing (Chevy and Mallory YL only), and wider post spacing to prevent crossfire and ionization. The kits include a high-quality cap with brass terminals, a rotor, and a cap spacer.
( 44 )
$227.95
$125.95
On Sale
Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. The kits include five modules in 200 rpm increments.
( 68 )
$123.95
$68.95
On Sale
Holley ignition coil spacers are great for turbo builds or other applications where more ignition coil clearance is needed. They are available for Gen I and Gen V coils. Choose the spacers designed for your coils.
Not Yet Reviewed
$15.47
$8.51
On Sale
Replace your worn-out or damaged boots with ACCEL boot and terminal kits. The premium-grade, silicone spark plug boots provide superior connection protection from dielectric leakage, moisture, dirt, and other chemical contaminants. High dielectric strength EPDM or premium-grade silicone distributor/coil boots provide excellent resistance to flashover and crossfire and protect the distributor cap and coil tower connections. Stainless steel spark plug terminals feature positive-locking snap clips to ensure long life, performance, excellent corrosion resistance, and a positive connection. Spring-loaded brass or stainless steel distributor terminals provide maximum electric conductivity and corrosion resistance.
( 2 )
$25.66
$19.25
On Sale
Keep your wires separated with Mr. Gasket wire looms and divider kits. Available in a variety of styles, materials, and finishes, these wire dividers fit 7 and 8mm wires with ease. Whether you're at the strip, cruising the streets, or sitting at a car show, Mr. Gasket wire looms and divider kits will be sure to keep your wires away from your headers and the engine compartment looking clean.
( 38 )
$16.95
—
$43.00
$9.32
—
$23.65
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$999.95
—
$1,599.95
$549.95
—
$879.95
On Sale
You already have the wire and Holley EFI ECU connector kits have the rest of what you need to rewire your EFI installation. Fully terminate your own custom main harness with Holly EFI ECU connector kits. Features include: * Pre-terminated J1A/J1B Tyco Superseal connectors * 20 to 22 gauge pre-terminated wires * 16 to 18 gauge pre-terminated wires * Cavity plugs
( 3 )
$52.69
$28.98
On Sale
These custom wire loom kits from Mr. Gasket were designed to eliminate crossfiring and prevent heat damage to ignition wires, while giving them a neat and custom look. Made from heat-resistant black plastic, the wire divider clips to a chrome plated steel bracket. This can be attached to the valve cover, while the wire separator is placed into the ignition wires, keeping them equally spaced. These kits will accommodate 7 to 8mm ignition wires, and include two 4-hole wire separators, eight 2-hole wire dividers, and four chrome plated steel brackets.
( 2 )
$25.95
$14.27
On Sale
Mr. Gasket weatherproof connector kits contain an assortment of wiring components that are ideal for all high performance and racing wiring applications. The high-quality connectors and seals provide a reliable, OE-style wiring connection. These 232-piece kits offer a selection of 14 connectors with 1 to 4 terminals per connector, and crimp terminals and seals that work with 12-20 gauge wire. The connectors are compatible with those on most high performance electrical components (i.e. MSD Distributors, Holley distributors, EFI Systems, and many OE sensors and components). A plastic storage case keeps everything organized. What's in the box: * (5) 1-pin connectors (male and female) * (3) 2-pin Connectors (male and female) * (4) 3-pin connectors (male and female) * (2) 4-pin square connectors (male and female) * (2) 4-pin flat connectors (male and female) * (120) crimp terminals—male and female for 12-20 gauge wire * (80) seals for 12-20 gauge wire * Plastic storage case
( 1 )
$95.85
$52.72
On Sale
These Mr. Gasket flexible tubing and tie strap kits are designed to protect electrical wire from heat and abrasion. They are manufactured from polyethylene and aree available in black, red, blue, yellow, and purple. The Mr. Gasket flexible tubing and tie strap kits come in 1/4 in., 3/8 in., 1/2 in., and 3/4 in. diameters. Complete the installation with the included six tie wraps; they are molded in the same color as the tubing for a perfect match, and give a nice finished look.
( 1 )
$14.09
$7.75
On Sale
Designed for competition and street use, Mr. Gasket's competition wire separator kits are the way to go. They help minimize crossfiring by keeping the ignition wires sufficiently separated from each other. Made from a heat-resistant plastic with or without the Mr. Gasket logo, these wire separators will accommodate 7 and 8mm ignition wires. They come available in a variety of colors and include two 2-wire, 3-wire, and 4-wire separators.
( 8 )
$10.03
$6.52
On Sale
The name of the game in racing is traction, and keeping your tires firmly planted under all track conditions and surface abnormalities have become a science. Monitoring suspension deflection through shock absorber movement is the common method of tracking suspension and tire performance. Racepak users can employ these shock absorber travel sensors to monitor even the slightest amount of shock travel or tire shake. Shock travel graphs will provide you with the data you'll need to tune 'to the track' more precisely. These door car kits are available for front or rear shock travel. The front shock travel sensor kits contain two 4 in. linear shock travel sensors, two signal conditioning modules, and an analog extension cable. The rear shock travel sensor kits contain two 8 in. linear shock travel sensors, two signal conditioning modules and an analog extension cable.
Not Yet Reviewed
$1,449.95
$942.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
