Availability
Showing In Stock Items. Show All 46 Items.
On Sale
Upgrade from your stock coil to more powerful PerTronix Flame-Thrower II coils. Designed for use with PerTronix's own Ignitor II® ignition systems, these 0.6 ohm coils deliver more than 45,000 V to your plugs for fuller, more complete combustion. Most have oil-filled canisters to keep the low-resistance windings secure and cool for reliable long-term performance. But there also are epoxy-filled versions for when vibration protection is needed. The Flame-Thrower IIs are available in chrome or black (epoxy, black only) and are not for use with original Ignitor ignition systems.
( 284 )
$63.10
—
$71.05
$56.79
—
$63.94
On Sale
PerTronix Flame-Thrower III ignition coils were developed for use with the new Ignitor III electronics. They feature an ultra-low resistance of 0.32 ohms with 45,000 V. The coils are engineered to charge to peak current typically 30-70 percent faster than other ignition coils. This means that maximum spark energy is sustained to higher engine RPM. The economical units are available in a black or chrome finish.
( 119 )
$64.15
—
$75.85
$57.74
—
$68.26
On Sale
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 519 )
$55.65
—
$78.50
$50.08
—
$70.65
On Sale
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 63 )
$79.55
—
$96.00
$71.60
—
$82.12
On Sale
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$112.95
$101.66
On Sale
ACCEL HEI in-cap Super Coils provide more high-rpm power and overall performance. Compatible with both original and computer-controlled HEI ignition systems, ACCEL HEI in-cap Super Coils are designed to resist shock and vibration. They have a finned cover that aids cooling, and hardware is included.
( 41 )
$100.95
—
$123.95
$75.95
—
$92.96
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$75.95
$56.96
On Sale
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 42 )
$70.00
—
$112.95
$63.00
—
$101.66
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$127.95
—
$131.95
$92.59
On Sale
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$106.05
—
$112.45
$85.39
—
$95.44
On Sale
These coils are designed to work with your MSD Digital CPC ignition system. They're direct replacements, so you can be assured of continued accuracy at any rpm, and consistent performance from your setup.
( 2 )
$99.95
$64.97
On Sale
ACCEL Mopar Remote Super Coil and harness combos provide increased performance for Dodge trucks and Jeeps that utilize the light gray Yazaki coil connector. You get quicker starts, improved idle, crisp throttle response, and higher top-end power. These coil and harness combos are compatible with Mopar J-TEC computer-controlled ignitions, and require no modifications for installation.
( 31 )
$117.37
$88.03
On Sale
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$59.14
On Sale
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$55.65
—
$67.35
$50.08
—
$60.62
On Sale
Engineered for use with the PerTronix Ignitor III ignition modules, these PerTronix Flame-Thrower HC E-core coils are also compatible with most capacitive discharge boxes. So, you have options here! These coils charge to peak current typically 36-60 percent faster than other coils and yield an incredible 60,000 V. Supported in a special heat sink made from 6063 T5 aluminum that efficiently transfers heat away from the windings, these E-core design coils are what high efficiency and performance are all about. Get more bang for your buck when you combine PerTronix Flame-Thrower HC ignition coils with PerTronix Ignitor III ignition modules!
( 18 )
$112.45
$101.20
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$99.95
—
$155.95
$54.97
—
$101.95
On Sale
Mallory constructed these distributor caps from innovative, space-age plastic. Mallory distributor caps combine the high dielectric strength required for today's high-energy ignition systems with highly impact-resistant qualities to prevent damage.
( 104 )
$118.95
$77.95
On Sale
ACCEL points eliminator ignition conversion kits utilize specialized electronic circuitry and an infrared signal to stabilize ignition timing from 1 to 10,000 rpm and offer more accuracy. Put an end to your old-school high-maintenance system with the ACCEL points eliminator conversion kit designed for your application. More product features include: * Reduces maintenance by eliminating the need to change points * Improved performance and fuel efficiency * Latest thermal, clad-based surface-mount construction for maximum dependability * Easy to install with simple hand tools
( 50 )
$111.95
$89.95
On Sale
ACCEL Ford EEC-IV Super Coils offer increased throttle response, idle quality, and starting. Their E-core design maximizes energy and voltage output. ACCEL Ford EEC-IV Super Coils are direct bolt-in and plug-in replacements for use with computerized ignitions and Ford TFI distributors. They'll get you the spark you need and the performance you want.
( 25 )
$84.85
$63.64
On Sale
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 80 )
$86.77
$65.08
On Sale
These PerTronix distributor gears are designed to fit your PerTronix Flame-Thrower distributors with no modifications. They are available in your choice of steel or bronze and come in different shaft diameters for your specific engine application. Keep your distributor spinning the right way with one of these PerTronix distributor gears.
( 7 )
$56.40
$50.76
On Sale
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$106.05
—
$118.80
$95.44
—
$106.92
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 441 )
$90.85
$59.05
On Sale
FiTech Go-Spark ignition coils will help complete your LS EFI swap or even update your modern muscle car with a fresh jolt of energy. These coils were developed to deliver optimum output with a quality fit and reliability. They bolt in place of the originals—and accept the sealed, locking connector and plug wire terminal for a simple upgrade. If you're looking for a little more dazzle under your hood, choose a model with a built-in LED that flashes when the coil is firing. All coils are sold individually or in a set.
( 1 )
$69.00
—
$75.00
$62.10
—
$67.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
