Availability
Showing In Stock Items. Show All 65 Items.
On Sale
Taylor offers these 8mm silicone spark plug boot and terminal kits for custom installs and repairs. They feature vibration-proof, spring-lock spark plug terminals, along with high-temperature boots.
( 125 )
$12.90
—
$22.80
$11.61
—
$20.52
On Sale
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$17.25
—
$19.30
$15.52
—
$17.37
On Sale
Taylor coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end, as well as for the coil attachment.
( 93 )
$14.10
—
$19.50
$12.69
—
$17.55
On Sale
These distributor and coil boot and terminal kits from Taylor are perfect for engine builders or for people doing repairs and maintenance. Kits are available with boots only, terminals only, and are also offered with both boots and terminals. Taylor makes it simple and convenient to get just what you need for your service, repair, or custom setup!
( 118 )
$11.85
—
$21.60
$10.66
—
$19.44
On Sale
Organize your spark plug wires with these Taylor clamp-style wire separators. Made from tough non-conductive 6/6 nylon, these separators can withstand temperatures of up to 400 degrees without melting and they won't distort, crack, or fade.
( 170 )
$17.25
—
$22.80
$15.52
—
$20.52
On Sale
These PerTronix billet distributor advance spring kits are designed to adjust the mechanical advance curve. They include three sets of springs to help you get the correct setting. The spring kits are designed to fit PerTronix Flame-Thrower billet distributors.
( 17 )
$22.80
$20.52
On Sale
PerTronix Flame-Thrower Ceramic Hi-Temp universal spark plug boots protect against direct heat, withstanding up to 2,000 degrees F. These universal boots provide the very best protection for applications with tight fitting headers or exhaust manifolds, and they fit typical 8mm spark plug wires. Pertronix offers the Flame-Thrower Ceramic Hi-Temp boots in several boot angle configurations individually and in sets of 8 to retrofit an entire spark plug wire set. Each kit includes pure silicone plug(s), wire bushing(s), spark plug terminal(s), and high-temperature ceramic boot(s).
( 36 )
$17.25
$15.52
On Sale
Replace your worn-out or damaged boots with ACCEL boot and terminal kits. The premium-grade, silicone spark plug boots provide superior connection protection from dielectric leakage, moisture, dirt, and other chemical contaminants. High dielectric strength EPDM or premium-grade silicone distributor/coil boots provide excellent resistance to flashover and crossfire and protect the distributor cap and coil tower connections. Stainless steel spark plug terminals feature positive-locking snap clips to ensure long life, performance, excellent corrosion resistance, and a positive connection. Spring-loaded brass or stainless steel distributor terminals provide maximum electric conductivity and corrosion resistance.
( 2 )
$25.66
$19.25
On Sale
Taylor brass compression battery cable terminal kits are designed for a fast and easy install. Simply strip your battery cable, apply the fitting, and screw it into the battery terminal. These brass terminals and compression fittings are cadmium plated for corrosion resistance.
( 46 )
$17.25
$15.52
On Sale
Some PerTronix Ignitor and Ignitor II kits are provided with a rotor to ensure proper magnet sleeve engagement. PerTronix replacement distributor rotors, as well as other parts and accessories, offer unmatched quality to accommodate the performance levels your distributor was engineered for. These rotors are available for a variety of distributor applications found in vehicles from the 1950s and up.
( 15 )
$11.85
—
$20.00
$10.66
—
$16.08
On Sale
Silver Sport wire connectors are available in different pigtail versions to complete wiring of your transmission. These SST OEM-quality connectors will restore and maintain proper working order of your transmission's reverse lights, speed sensors, and lockouts with a simple splice and plug-and-play.
( 5 )
$19.95
$17.96
On Sale
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 81 )
$12.99
—
$19.97
$11.69
—
$17.97
On Sale
If you've upgraded your stock points ignition with a PerTronix Ignitor or Ignitor II ignition module, you may also want an upgraded coil wire to take full advantage of your upgrade. PerTronix can help, without the cost of an entire ignition wire set—this coil wire is all you need.
( 6 )
$11.85
$10.66
On Sale
Restore efficiency and performance to your ride with high temperature-resistant spark plug boot replacements from Taylor. They're made from a premium-grade silicone compound to provide superior protection against dirt, dielectric leakage, moisture, and other contaminants. These high-quality spark plug boot replacements come in various applications in a blue, black, or gray finish.
( 3 )
$17.25
—
$21.10
$15.52
—
$18.99
On Sale
Keep an eye on your X4 and the road ahead with SCT suction cup mounts for your windshield. These mounts securely hold your programmer with an industrial-strength suction cup, allowing you to safely monitor critical system data without blocking your view. You don't want to hold your X4 while driving, and often there's no passenger to assist you. The solution is quick, easy, and economical--SCT suction cup mounts.
( 7 )
$22.99
$21.99
On Sale
These Taylor cylinder markers will not only save you time, but will also ensure that your plug wires will always be in the right place. They'll withstand underhood temperatures and they're available in two sizes.
( 14 )
$14.10
$12.69
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 802 )
$27.13
$20.35
On Sale
PerTronix vacuum advance lockouts are designed to eliminate the vacuum advance and remove the vacuum advance chamber from PerTronix distributors. Made of steel, they're available for both clockwise and counterclockwise rotation distributors. Installation is simple; no other modifications are required.
( 3 )
$11.85
—
$20.00
$10.66
—
$18.00
On Sale
Are you installing a new coil? You're going to need one of these PerTronix ignition coil brackets. They are manufactured from steel and are available in a zinc plated or chrome finish. The PerTronix ignition coil brackets have been designed for use with standard round canister-style coils.
( 33 )
$16.20
$14.58
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 131 )
$16.62
—
$39.50
$10.80
—
$21.73
On Sale
ACCEL universal single wire replacement kits are great for that one wire that got cut, burned, or broken. Each kit includes a 60 in. long, 8mm carbon/graphite core with boots and terminals for 90 degree male, 90 degree female, and straight points female towers. Service your spark plug wires with ACCEL.
( 7 )
$27.36
$20.52
On Sale
These spark plug and coil wire repair kits from Taylor are easy replacements for damaged individual wires. They're available for an assortment of wire types in a variety of colors and sizes to suit your application.
( 22 )
$21.10
—
$22.80
$18.99
—
$20.52
On Sale
These custom wire loom kits from Mr. Gasket were designed to eliminate crossfiring and prevent heat damage to ignition wires, while giving them a neat and custom look. Made from heat-resistant black plastic, the wire divider clips to a chrome plated steel bracket. This can be attached to the valve cover, while the wire separator is placed into the ignition wires, keeping them equally spaced. These kits will accommodate 7 to 8mm ignition wires, and include two 4-hole wire separators, eight 2-hole wire dividers, and four chrome plated steel brackets.
( 2 )
$25.95
$14.27
On Sale
Taylor toggle switches are designed for use with most standard 12 V systems. They feature a 50 amp rating and can work most electrical devices without a relay. The switches use a heavy-duty, die-cast aluminum body and screw-on type terminals.
( 2 )
$13.25
$11.92
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
