Availability
Showing In Stock Items. Show All 60 Items.
Clearance
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$44.99
$30.50
Clearance
ACDelco GM Genuine Parts exhaust temperature sensors are designed to report the exhaust gas temperature to the engine control module. The temperature signal is then used by the control module to adjust fuel delivery and boost pressure to protect the exhaust after-treatment components from overheating and keep them operating efficiently. GM Genuine Parts are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors.
( 3 )
$42.99
$27.50
Clearance
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 92 )
$34.99
—
$75.99
$23.50
—
$47.50
Clearance
ACDelco GM Genuine Parts brake pedal position sensors monitor the movement or position of the brake pedal to directly activate the brake, brake lights, and turn off the cruise control (if applied). These original equipment brake pedal position sensors have been manufactured to offer the same level of performance, durability and service life you expect from General Motors.
Not Yet Reviewed
$36.99
$27.50
Clearance
Standard Motor Products oxygen sensors are manufactured to OEM specifications for quality, durability, and proper fit. These oxygen sensors are designed to keep your engine from running too rich or too lean for optimum performance.
Not Yet Reviewed
$34.99
—
$50.99
$25.50
—
$34.50
Clearance
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$48.99
$36.50
Clearance
Is your TPS lying to your engine? Your car's sensors need to be kept in check to ensure that accurate info is being used to maintain top performance. Your throttle position sensor, or TPS, as it is known, is one of several sensors relaying information to your car's computer and engine. Beck/Arnley throttle position sensors are top-quality parts made right, to make your life a little easier. If your car is jerking and hesitating, you may be getting erroneous information. Replace your worn-out TPS with a new one from Beck/Arnley.
( 4 )
$45.99
—
$67.99
$28.50
—
$45.50
Clearance
Dorman crankcase pressure sensors are designed to match the fit and function of the original sensor on specified vehicles, and each one is engineered for reliable performance. With durable construction and trustworthy quality, these Dorman direct replacements offer the ideal solution for replacement of the original sensor that has failed due to fatigue or electrical malfunction. Choose the proper one for your vehicle.
Not Yet Reviewed
$78.99
$41.50
Clearance
Crown Automotive knock sensors are designed to detect harmful engine vibrations. The signal from these devices is sent to the PCM/ECM, and that is used to control the engine's timing. The symptoms of a bad sensor usually show up at highway speeds or under a load. Your vehicle will have a loss in fuel mileage and acceleration, especially at highway speeds--performance decreases and there is a risk of serious engine damage. If your knock sensors have failed or broken, check out Crown for quality replacement parts.
Not Yet Reviewed
$30.99
$22.50
Clearance
Motorcraft ABS wheel speed sensors are designed for use with electronic systems in Ford and Lincoln vehicles. They are responsible for relaying the wheel speed to the ECU so that it can tell the ABS system how much pressure to safely apply. Maintain your vehicle with the proper fit and function Motorcraft parts, the preferred choice of Ford.
( 2 )
$71.99
—
$103.99
$46.50
Clearance
Mopar Replacement exhaust temperature sensors are direct-fit OEM replacements that will provide the matching fit and function of your originals. Mopar sensors are manufactured from quality materials, and are the smart choice in servicing and maintaining the best performance of your Chrysler, Dodge, or Jeep vehicle. Order the sensor model for your application needs.
Not Yet Reviewed
$86.99
$33.50
Clearance
Get your vehicle running smoothly again with an Cardone remanufactured mass airflow sensor. These economical MAF sensors precisely track OE output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation. All critical components are 100 percent re-soldered to ensure excellent electrical connections, and tested with automated computerized equipment for functionality and reliability. Sensors are tested on vehicles to ensure form, fit, and durability. Meet all performance requirements throughout the entire operating range of your vehicle with Cardone remanufactured mass airflow sensors.
( 27 )
$82.99
$40.50
Clearance
These Dorman throttle position sensors are made of high-quality materials and enable you to monitor the position of your throttle. They replace your factory throttle body position sensor. Dorman has the best quality OEM replacement throttle body position sensors you'll find on the market.
( 3 )
$50.99
—
$67.99
$23.50
—
$30.50
Clearance
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$31.99
—
$100.99
$20.50
—
$48.50
Clearance
Astemo offers throttle position sensors a wide range of domestic and import vehicles. These stock replacements are built to OEM specifications for performance and longevity. A throttle position sensor is used to measure how open the throttle valve is—and therefore controls the amount of air which can flow into the engine's intake manifold. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the TPS model recommended for your application.
Not Yet Reviewed
$41.99
—
$63.99
$36.50
—
$42.50
Clearance
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$32.79
—
$73.99
$20.50
—
$49.50
Clearance
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$29.99
—
$62.99
$25.50
—
$49.50
Clearance
PowerStop has a reputation for precision and adherence to the strictest OEM standards. Extending those standards, PowerStop's electronic brake wear sensors are designed to meet the same form, fit, and function as the original OEM part. Brake wear sensors wear down with the pads and illuminate the brake pad wear indicator light/warning. When that happens, it's time to replace the brake pads as well as the sensors. PowerStop electronic brake wear sensors are designed to withstand high-temperatures, assure excellent electrode conductivity, and they will continue to work after thousands of miles, providing the safety and performance drivers count on.
( 5 )
$41.63
—
$41.72
$27.50
—
$29.50
Clearance
Astemo MAP sensors support accurate measurement for reliable engine performance. Typically found in the induction system of the engine, the manifold absolute pressure sensors help the engine control module to manage engine characteristics to achieve the most efficient and longest lasting results. The sensor works by sending electrical signals to the ECM within a specified voltage range created by highly sensitive and accurate piezoelectric crystals, which, when compressed by the pressure in the induction system, generates an electrical output. Designed to meet the exact needs of each specific vehicle, the Astemo MAP sensors are the premium choice. Order the MAP sensor model designed for your application needs.
Not Yet Reviewed
$36.99
$24.50
Clearance
Dorman crankshaft position sensors are direct-fit replacements that are easy to install and offer long, reliable service. They are constructed from high-quality plastic with metal-reinforced mounting points to protect against failure. Dorman sensors accurately measure crankshaft location to detect misfires and control engine timing. They are manufactured to strict engineering quality standards and are available for a wide variety of applications.
( 2 )
$57.99
$35.50
Clearance
The knock sensor is able to detect mechanical stress and produces a voltage when the car knocks or pings. Under heavy acceleration, it sends signals to the ECU and the ECU retards the ignition timing to compensate for the knocking, which in effect protects the pistons and rings from damage. Knocking also occurs when using low-grade fuel and having the knock sensor allows you to use different grade fuels without causing engine damage. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts knock sensors line has superior coverage for domestic and import applications.
( 3 )
$32.79
—
$37.99
$20.50
—
$23.50
Clearance
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
Not Yet Reviewed
$29.79
—
$31.99
$21.50
—
$22.50
Clearance
If you're experiencing temperature problems with your vehicle, then you may need Four Seasons coolant temperature sensors to eliminate any chance of further issues. Four Seasons coolant temperature sensors are high-quality, direct-fit OE replacements.
( 2 )
$28.99
$22.50
Clearance
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$73.99
$46.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
