Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
14 Results Found For "low"
Showing In Stock Items. Show All 24 Items.
On Sale
Holley Sniper EFI HyperSpark Distributor Kits
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$1,024.95
$921.95
DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 3 )
$869.99
ARC Pro Mod Flat Touch Switch Panels with Backlit System Kill Switch
ARC Pro Mod Flat Touch switch panels with backlit system kill switch are truly unique! These Flat Touch switch panels use no electronics, which makes them immune to EMI and RFI interference. Units master kill switch is designed to turn off any, none, or all the switches at the same time for safety during competition racing. Available in 4-switch, 8-switch, or 12-switch configurations, each module comes with a selection of race words for switch labeling. White face switch modules have text labels backlit red when the switch is off, allowing you to not only see where, but what each switch is. When the switch is turned on the backlight changes from red to green. Black face switch models are equipped with nightglow, and function exactly the same as white face switch modules but feature illuminated text and outer perimeter that automatically increases the unit's brightness at night to maintain better visibility in low light vehicles.
Not Yet Reviewed
$864.99
—
$914.99
On Sale
MSD Pro-Billet Ready-to-Run Distributors
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 330 )
$870.95
$763.95
—
$782.95
On Sale
MSD Ford Crate Engine Ignition Kits
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$972.95
—
$1,024.95
$874.95
—
$921.95
XS Power Titan8 Lithium Batteries
XS Power Titan8 lithium batteries are designed for peak power. This Lithium Titanate Oxide (LTO) Series uses a very high-power lithium cell that is designed for very high-burst output (up to 100 times its capacity) as well as very high-charge current (30 to 60 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current. The built in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. Each module comes standard with a built-in balancing system and can be upgraded to include Bluetooth connectivity that allows remote cell monitoring, internal temperature sensing, battery health monitoring, and can be configured to send notifications to any tablet or smartphone when any user preset limit is met, including low voltage, over temperature, overcharge, etc. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in that are suitable for use in the factory under hood position.
( 4 )
$799.99
MSD DIS-4 Plus Digital Ignitions
MSD DIS-4 Plus digital ignitions improve the output of your late model distributorless ignition system (DIS). The capacitive discharge ignitions feature multi-channel capability, complemented with multiple sparks, two rev limiters, and a timing control. These DIS ignitions are engineered with the latest in digital science, including power MOSFET technology and efficient IGBT coil drivers. They're managed by a 15 MHz micro-controller for extremely fast compensations and decisions. In the end, this creates incredibly accurate spark delivery, rev limiting, and timing functions. Throttle response and mid-range pull are also improved, due to a series of powerful multiple sparks that last for 20 degrees of crankshaft rotation. There is a two-step rev limiter, which gives you one limit to set for holeshots and another for top-end performance. For engines using nitrous or extremely high cylinder pressures, you can also program a high-speed retard after the engine hits total timing. Both of these features are easy to adjust with the new built-in rotary dials. They also feature an ignition interrupt that will prevent the engine from starting by disabling the output to the coil, a retard feature that retards the timing at the top-end to prevent detonation, and an LED monitor that will alert you of a low supply of voltage or faulty input signals. Also, there is now a true step retard that can be activated through your nitrous solenoid wiring! The DIS-4 Plus ignitions are designed for 6 or 8-cylinder engines with three or four coil packs.
( 1 )
$972.95
Summit Bucks
March Performance Alternators
March Performance alternators combine reliable amperage with stunning good looks. They are available in a choice of amperages and finishes, including polished, chrome, and black, for Ford, GM, and Mopar applications. These one-wire alternators look great in any engine compartment and provide the power you need. Additional features of March Performance alternators include: * Easy-to-connect * High-quality neoprene-sealed bearings for long life * Ultra-low cut-in voltage regulator maintains amperage at low idle speeds * High-tech rotors and stators, built with higher copper and steel content, deliver the greatest output with the best reliability * Pulley and nose cover sold separately (most models)
( 59 )
$883.99
Granatelli Motor Sports Ignition System Combo Kits
Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware
Not Yet Reviewed
$878.75
Powermaster Drag Race Alternator Kits
Solve low amperage problems with easy-to-install Powermaster Drag Race alternator kits. They include a one-wire lightweight racing alternator, a hard-coated deep-groove alternator and crank pulley, bracket kit, and a belt. The black, high-heat transfer coating reduces alternator temperatures by 50 degrees F or more, thus prolonging their life and enhancing efficiency. Powermaster dyno-tests each alternator under various loads at variable speeds, and attached a tag with the performance data to each case. They come in your choice of low-mount kits for rail cars, or snug-mount kits for body cars.
( 23 )
$783.99
Summit Racing™ Bulk NGK Racing Spark Plugs
What's firing your engine? Summit Racing™ Bulk NGK racing spark plugs are built to withstand the severe mechanical and thermal shock associated with high-revving, high-compression engines. NGK racing plugs feature special electrode materials—precious metals like platinum or gold/palladium—for greater durability and low voltage requirements. Fine-wire center and ground electrodes provide better sparking and enhanced ignitability. And the unique arrangement of insulator noses improves throttle response! Whether you're a weekend warrior or an expert racer, rocket your way to victory with racing spark plugs from NGK—the people who spark winners! Need a large quantity? These NGK bulk packs are the perfect choice.
( 3 )
$934.15
Bully Dog ECM Diesel Tuners
Bully Dog ECM diesel tuners are designed to be stowed away after installation--simply set 'em and forget 'em. These powerful controlling devices are preloaded with three high performance, dyno-proven tunes that increase horsepower, torque, and fuel economy. They're built with simple, easy-to-use performance in mind, and can also read and clear diagnostic trouble codes. Give your rig the ability to tackle any challenge along the route with Bully Dog ECM diesel tuners. Features and specs: * Idle shutdown timer sets length of time vehicle will idle until the engine turns off to save fuel and extend the life of the turbo by allowing it to cool down before engine shutoff * Increase and decrease the set limit of the vehicle's cruise control saving time and money when crossing borders. * Speed limiter can be adjusted to automatically limit engine power * 75 to 100 hp gains possible in power mode * Free internet updates help assure that you always have the latest files for your vehicle * Fuel savings up to 12 percent and longer engine life * Adjustable options vary for each vehicle and are not available on all vehicles
( 1 )
$849.00
Compu-Fire Gen 3 Starters
Compu-Fire Gen 3 high performance starters provide significantly increased cranking power over your stock starter. They are available in chrome or black finishes. Select the starter designed for your motorcycle.
Not Yet Reviewed
$804.20
ACCEL Motorcycle Super Single Fire Ignition Systems
Now you can have a balanced performance ignition system that is designed to make the most horsepower without mixing and matching components. ACCEL Motorcycle Super Single Fire ignition systems are complete bolt-on systems that are designed to work together to produce an adjustable ignition that outperforms others. Each Super System includes the adjustable ignition module, a Single Fire Super Coil, ACCEL high performance U-groove spark plugs, and ACCEL black 8.8 performance spark plug wires. These systems are easily installed and simply adjusted with switches on the module to produce the performance to match your machine.
Not Yet Reviewed
$949.95
