Race Electronics Ignitions & Electrical - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Racepak AF1 Single Channel Air Fuel Sensor Packages

Racepak's AF1 single channel air fuel sensor packages are designed to be utilized with any of their V-net (canbus) Series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 V enables use with standard 12 or 16 V high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat- and water-resistant controller with integrated V-net module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0 to 5 V analog output

Not Yet Reviewed

$511.95

Biondo Mega 475 Delay Boxes

Biondo Racing Products introduces the Digital Delay Mega 475 Delay Box with built-in Mega Dial controller. Every time you change Your Dial on the Mega 475, your ET is automatically updated on the Dial Display board. No need to enter Your Dial a second time on another unit. Biondo started with the popular Mega 450 and improved on it by adding some new racer-requested features, including the Set and Go push-button mode which is similar to Z-Force. Additional new features include the ability to directly control any V2 Dial Display Board, and the ability to Tap Up and Down on the same pass. The Replay Tach can now record up to nine passes and replay them on the screen. Bracket and Pro Mode both have two 4-Stage timers and can shift up to 5 times by RPM or Time. Features / Specifications: * Face Size: 6 11/16 in. x 5 in. x 1 3/4 in. * Overall Size: 8 11/16 in. x 5 in. x 1 3/4 in. * 12 and 16 volt compatible * 4 - Push-button inputs * 4 - 12 amp outputs -- (Transbrake, SFO, Throttle Stop and Shift) * Built-in controller for V2 Dial Display boards * Crossover Delay Box * CrossTalk Compatible * Controls any V2 Mega Dial Display Board * Day and Night intensity settings for the Dial Board * 5 push-button modes * Set and Go push-button mode (similar to Z-Force) * 1 or 2 hits at the tree with built in 'How Late' feature * Tap Up or Tap Down to .001 seconds * Push-button Interrupt safety feature * Two separate 4-Stage Timers (programmable to thousandths) * Starting Line Enhancer (SLE) * Shift up to 5 times by RPM and/or Time * Built in digital tach with peek RPM and Replay Feature * Selectable Function Output (SFO) -- Line Locks for anti-roll staging -- Starting Line Enhancer -- Second 4 Stage Timer -- Spare Transbrake * Driver Reaction Tester * The large backlit screen displays 4 lines of data at once * Backlit keypad * Glove-friendly * Compatible with 4, 6, and 8 cylinder engines * Compatible with most ignitions

5.0 out of 5 stars ( 1 )

$637.99

—

$659.99

AiM Sports MyChron6 Lap Timers

AiM Sports sixth generation lap timer, MyChron6, integrates advanced technologies, making them powerful data analysis centers capable of providing increasingly accurate and detailed information from different sources. AiM Sports MyChron6 lap timers offer high-precision GPS, 6-axis IMU, Bluetooth connectivity, a second CAN for additional sensors, and a long lasting battery. They are designed with five individually configurable RGB LEDs that you choose the color and value thresholds for their activation, plus two alarm RGB LEDs, an ambient light sensor, and eight backlit colors to customize your screen. They have 4GB of memory, a rechargeable lithium battery with approximately 20 hours of life, and are IP67 rated. Features and benefits: * Five individually configurable RGB LEDs can be configured to show your best lap/split time, monitor RPM level, and even indicate the right moment for gear shift * Two alarm RGB configurable LEDs can customize behavior based on water temperature or other parameters * Ambient light sensor makes brightness and contrast ideal in all light conditions * Dedicated pages make information monitoring easy and prompt * Bluetooth connectivity * Wi-Fi offers easy wireless data download * One temperature input * Second CAN connection is dedicated to connect external modules requiring CAN communication protocols * USB-C connection allows you to charge your logger, and permits data storage in the optional massive 16 GB dedicated memory module * Inertial platform--6-axis 50 Hz Inertial Measurement Unit (IMU) provides information to control the engine and behavior of the chassis * Upgraded GPS--internal, high precision, 25 Hz four-navigation satellite system (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track. The precision of the calculated lap times is 1/100 of second. * Track database can recognize the finish line coordinates of thousands of tracks all over the world * Data analysis--data can be downloaded (via cable, Wi-Fi, or Mini USB storage) and analyzed in depth on your PC with RaceStudio 3 software

5.0 out of 5 stars ( 1 )

$659.00

Innovate LM-2 Digital Air/Fuel Ratio Meters

Innovate's LM-2 digital air/fuel ratio meters combine an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The meters' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s' self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2s also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. With the provided LM Programmer software, these analog outputs may also be configured by the user. Innovate's LM-2s are available in single wideband and dual wideband O2 configurations. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool, read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card (included) * Playback log data on screen with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC

4.09 out of 5 stars ( 11 )

$551.99

Racepak SmartWire Keypads

Racepak SmartWire keypads are designed specifically for use with the Racepak SmartWire kits. The keypads allow user input for up to eight functions. Their clean look and soft-touch buttons blend with any interior and provide a clean, finished appearance.

Not Yet Reviewed

$634.95

Computech EGT Plus Monitor Kits

Have you ever had a tune-up on your engine that was just perfect? Or, did you spend the time and money to dyno your engine? Wouldn't it be nice to go to the track and get back to that same tune-up every single time? With the Computech EGT Plus (exhaust gas temperature) monitor kits you can make sure that your vehicle is tuned correctly, week in and week out. Choose the EGT Plus monitor kit that suits your needs and get ready to tune your fuel system with confidence to maintain the performance edge and consistency you need to be a winner! Additional features of the EGT Plus monitor kits include: * Available with single or dual probes * Available in weld-in or clamp-on styles * Unit monitors dual temperature channels * Power source through 9 V battery or 12 V vehicle supply * Continuous mode--simple maximums * Record switch mode -- Choose when to record -- Maximum temperature and rpm * Trans-brake mode -- Launch temperature and rpm -- Finish line temperature and rpm -- Maximum temperature and rpm -- Time maximums occurred -- Notable time, temperature, and rpm

3.0 out of 5 stars ( 2 )

$519.95

—

$629.95

FAST XFI Edash Touchscreen Tuners

FAST XFI and XFI Sportsman are popular, well-designed systems. Their new XFI Edash is compatible with XFI systems, letting you view multiple sensors in real time, then make adjustments through the full-color touchscreen tuner without a laptop or any software. Edash uses the current XFI wiring harness Calport connector, giving it plug-and-play capabilities. They automatically sense which EFI system is attached--and display the data through a compact, readable dash unit. A multi-use accessory, Edash eliminates the need for a separate tach, voltage regulator, and temperature gauge; with an XFI driveshaft rpm sensor, you'll even see mph and mpg info. These units display up to 20 live data readings at a time, allowing you to evaluate them as a whole instead of scrolling back and forth. Additional features include: logging error codes; both maximum and minimum sensor readings; user-selectable start-up screen; and an articulating, quick-release suction cup mount. FAST XFI Edash touchscreen tuners provide live data, with the ability to easily make changes for improved performance.

4.57 out of 5 stars ( 7 )

$517.95

Racepak Shock Travel Sensors

Shock travel sensors are linear potentiometers that record the slightest amount of suspension movement. Monitoring the extension and compression of the shock absorbers aids greatly in understanding what the chassis is doing. It is a principal means of evaluating suspension movement and chassis setup. Regardless of your type of racing, Racepak shock travel sensors provide information that is frequently crucial to separating winners from the also-rans. They are usually connected through an analog port of a data recorder (sold separately) and monitored at high sample rates. An analog channel is required for each sensor; a separate sensor is required for each wheel monitored.

Not Yet Reviewed

$532.95

Lowdoller Motorsports K-Type EGT Probes

Lowdoller Motorsports K-type EGT probes, based on their design and materials, offer benefits that include high accuracy, rapid response time, and robust construction for motorsports applications. The Lowdoller probes use an Inconel sheath, a nickel-based super alloy known for its high-temperature strength and corrosion resistance. This allows the probes to withstand the extreme temperatures that are found in both high-performance and race engines. Leveraging on the reliable and widely used K-type thermocouple technology, these probes provide precise exhaust gas temperature (EGT) measurements, which are critical for both engine tuning and health.

Not Yet Reviewed

$638.50

—

$649.00

FuelTech FT Input Expanders

FuelTech's FT input expanders are input expander modules compatible with the FuelTech PowerFT line (FT500/FT500LITE/FT450/FT550 and the FT550LITE/FT600). These FT input expanders offer 20 inputs for sensor readings—such as pressure, flow, temperatures, position, and activation of functions using keys or buttons, and four differential inputs rpm reading and speed. The expander modules fully integrate with FTManager software and communication via the CAN network, with a simple and fast configuration through an interface already known to users familiar with FuelTech products.

Not Yet Reviewed

$659.00

Dedenbear Lightning Delay Boxes

Dedenbear Lightning delay boxes feature a billet aluminum enclosure that keeps all of the precision circuitry protected. The small multi-functional units' can be every racers little helper! Features include: * Four different delay modes * Tap/tap down * Starting line launch control * Two 4-stage throttle stop/nitrous timers * Adjustable transbrake lockout * East touch illuminated keypad * Lighted display for easy nighttime viewing * Independent line lock output * Remote dial-in board display output * Accidental transbrake release protection

2.0 out of 5 stars ( 1 )

$709.99

—

$746.99

Biondo DDI 1049 ELITE Mega Panels

Biondo Racing DDI 1049 ELITE Mega switch panels bring you the same performance and reliability of the original Mega Panel with the addition of Biondo's NEW Elite Relay Board! The main differences between a standard panel and an Elite panel are: * Relays have been upgraded * The Elite Board can shift an electric or air solenoid * The Elite Board can handle 40 amps compared to standards 20 amps. The sleek and compact Switch Panel is the main part of the system and includes 6 labeled switches to control your car's most important functions. * The unique starter button and premium grade switches combine a new age design with functionality. * The ignition and fuel pump switches are dual position switches, while the fan/water pump, headlight/taillight, and aux 1/aux 2 are all three position switches. It is made to easily fit into a dragster's dash, with the overall size similar to the overall size of the conventional switch panel. * To simplify the wiring process, the Switch Panel plugs into the Elite Relay Board using the supplied heavy duty 8 ft. cable. The Elite Relay Board is the "power distribution board" and was built with durability in mind. It's capable of handling a 100 amp load with the supplied 6-gauge wire that connects from the high current connector on the Board to the master cutoff switch. It also includes dedicated relays for each switch, with each relay including its own status indicator light to let you know which circuit is on, and a dedicated fuse assigned to it. The Elite Relay Board can handle up to 40 amps on any output. In the very unlikely event that even more current is required, two outputs can be connected together for up to 80 amps. It also features an unswitched fused 12 V output that can handle up to 40 amps. This output is also shut down when the panic button is pressed. (The panic/emergency post on the board allows you to directly connect a "panic button" which will quickly shut off the power to the car in case of an emergency.) The Elite Relay Power Board has a Shift Output Controller that is only active when the ignition switch is on. The Shift Output Controller allows the driver to select whether to shift on time or RPM using a remotely mounted Select Switch (usually mounted on the dash). The Elite Relay Board also has three slide switches. An Output Control Switch to control whether the shift output will apply 12 V (N.O.) to shift or remove 12 V (N.C.) to shift and two Input Selector Switches used to tell the Elite Relay Board whether 12 V or ground is coming from the Shift Controllers. The relay board also includes the "Dual Select" feature which allows you to individually customize how to control each of the three position switches. For example; the switch on the Mega Panel labeled FAN / Water Pump turns on the fan and water pump in one position and the water pump in the other position. By turning on the Dual Select dip switch located on the relay board, you can change it so that the fan only is on in the fan position and the water pump only is on in the other position. The wiring kit includes enough color-coded wire, connectors, wire ties and a complete color-coded diagram to help you neatly wire a vehicle. Features / Specifications: * Mega Panel size: 8 in. x 3 1/4 in. x 1 3/4 in. * Panel mounting holes 7 1/2 in. left to right, 2 3/4 in. top to bottom * Relay Board size: 8 1/2 in. x 5 in. x 1 in. * Complete color-coded wiring kit with connectors and color-coded diagram professionally wire your race car for years of trouble free racing.

Not Yet Reviewed

$728.99

Lowdoller Motorsports Laser Ride Height Sensors

Lowdoller Motorsports laser ride height sensors are designed to provide precise information about the vehicle's height and movement, aiding in suspension setup for optimal performance. These laser sensors are used to accurately and continuously measure the vehicle's distance from the track surface, enabling precise aerodynamic tuning, suspension adjustments, and analysis of the car's behavior by calculating the cars pitch, roll, and heave movements. These sensors achieve this by projecting a laser that reflects off the track and is captured by a detector, which then sends data to a data logger or Engine Control Unit (ECU) for real-time analysis and adjustment.

Not Yet Reviewed

$504.50

Innovate LM-2 Ultimate Shop Kits

Innovate LM-2 Ultimate shop kits set you up to dial in maximum horsepower. The Ultimate shop kits are available in single or dual channel versions and include 18 ft. sensor cable, exhaust clamp, inductive clamp, and bung/plug. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC

Not Yet Reviewed

$641.99

FuelTech EGT-4 CAN Conditioners

FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included

Not Yet Reviewed

$674.00

Racepak V-Net EGT Junction Boxes

Racepak V-Net EGT junction boxes provide a smart single-wire connection to your drag racing vehicle network (V-Net). Available as pug-and-play assemblies or individual components pre-programmed for your convenience, these sensors measure the data and the modules that convert the signal from the sensor, so that it can be transmitted. Available as individual or grouped thermocouples for each cylinder or bank of cylinders. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT junction boxes.

Not Yet Reviewed

$634.95

Biondo Elite 625 Delay Boxes

Biondo Elite 625 delay boxes have the ability to directly control any V2 dial display boards. Every time you change your dial on the Elite 625, your dial display board is automatically updated, eliminating the need to enter your dial a second time on another unit. With Biondo's "Set and Go" push-button mode, the press of a button (SET) sets the trans-brake. Then the press of a separate second button (GO) starts the delay timing. Additional options include the ability to Tap Up and Down on the same pass. The setting of the S.L.E. by the trans-brake push-button can also be turned off. The Replay Tach can now record up to nine passes and replay them on the screen. Both Bracket and Pro Mode have three 4-stage timers and can shift up to five times by RPM and/or Time. Biondo Elite 625 delay boxes are available with a red, green, or blue screen. Select the one you prefer. Features: * Crossover delay box * CrossTalk compatible * Day and Night intensity settings for the dial board * Five push-button modes * 1 or 2 hits at the tree with built in "How Late" feature * Tap up or tap down to .001 seconds * Multi-tap feature * Push-button interrupt safety feature * Seven independent outputs * Three separate 4-stage timers (programmable to thousandths) * Dedicated (SLE) Starting Line Enhancer output * Dedicated Line Lock output * Adjustable Burn-out timer * Dedicated high-current shift output * Built in digital tachometer with peek rpm and replay feature * 9-pass memory replay tach * Selectable 4-, 6-, and 8-engine cylinder setting * Compatible with most ignitions * Driver Reaction Tester with LED * Large 4-line LCD (see Dial-ins and Delay at the same time) * Backlit keypad and screen * Glove-friendly * Separate remote mount I/O board to simplify wiring * Full status LEDs on remote I/O board

Not Yet Reviewed

$748.99

Innovate LM-2 Dual Digital Air/Fuel Ratio Meter Basic Kits

Innovate LM-2 dual digital air/fuel ratio meter basic kits feature the LM-2 that combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Innovate basic kits include the accessories to display your air/fuel ratio, either on the meter and/or on your PC. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * Dual Channel A/F version * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC Innovate dual basic kits include: * LM-2 meter * Bosch wide-band oxygen sensors * 8 ft. sensor cables * Cigarette lighter power adapter * USB cable for PC connection * Weld-in bung and plug kits * Manual

2.0 out of 5 stars ( 1 )

$705.99

FAST XFI EGT Modules

FAST XFI EGT (Exhaust Gas Temperature) modules allow XFI owners to monitor up to eight EGT sensors without requiring the use of the eight square auxiliary XFI inputs. The modules utilize a small, thin cable to communicate through a high-speed CAN (Controller Area Network) connection protocol at 500 kbps. They measure and transmit data from k-type thermocouples with a range of 32 to 1,670 degrees F (0 to 910 degrees C). Once transmitted, the data is available for viewing and logging through either the XFI or the FAST dash logger. FAST XFI EGT (Exhaust Gas Temperature) modules are available individually with wiring harness and manual, or in kits that also include fittings and thermocouplers.

Not Yet Reviewed

$649.95

Racepak Non-Contact Infra-Red Temperature Sensors

Racepak non-contact infra-red temperature sensors are designed specifically for the motorsports market. These compact but rugged sensors are capable of monitoring temperature data for a variety of surfaces. The non-contact design is well-suited for stationary or moving surface temperatures, such as tire or race track surfaces. They have a 4:1 ratio focal point, e.g., when the surface being monitored is 4 in. away from a sensor, the focal point will be a 1 in. diameter.

Not Yet Reviewed

$599.95

On Sale

Racepak V-Net EGT Sensor Kits

Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)

Not Yet Reviewed

$999.95

—

$1,024.95

$563.70

—

$599.50

HP Tuners CORE Flying Lead ECU Harnesses

CORE ECU is HP Tuners debut standalone engine management solution, delivering superior control over your powerplant with many features that go beyond the constraints of factory ECUs. HP Tuners offers several wiring harness options to mate with their CORE ECU. Their CORE flying lead ECU harness is unterminated, providing a 15 ft. length with labeled open leads to customize your harness installation.

Not Yet Reviewed

$549.99

Biondo Elite Dial Crossover Delay Boxes

Biondo Elite dial crossover digital delay boxes can control any V2 (four wire) dial display boards, including multiple and dual view boards. They offer several special features, like the ability to shift up to five times, the ability to shift by rpm, Biondo's Set and Go push-button mode, multi-tap feature, and their built-in burn-out timer that makes sure the burn-outs are done the same every time. And Elite dial crossover boxes won't leave you in the dark! The screen is backlit, and the switches are exclusively ringed with a white backlight, making them easy to operate at night. Additional features: * CrossTalk compatible * Full bracket and Pro Modes * Six day and night intensity settings for the dial display board * Plain text on the screen to indicate what's displayed * Separate I/O board to simplify wiring * Status LEDs on I/O board * Driver's reaction tester -- Built-in LED * Three 2-stage timers (programmable to thousandths) * Programmable throttle stop override * Built in digital tach with peak rpm recall * Five push modes * Seven independent outputs: -- Trans-brake -- Starting line enhancer -- Line lock -- Timer 1 (40 Amp) -- Timer 2 (40 Amp) -- Timer 3 (40 Amp) -- Shift (40 Amp) * All outputs are fused

Not Yet Reviewed

$748.99

Altronics O2 Alert Warning and Recording Systems

Altronics O2 Alert warning and recording systems are specifically designed to record air/fuel ratios with a warning output. Not only do they record up to two wideband oxygen sensors, they also record engine rpm and have a programmable warning output to protect against detonation. The systems feature a backlit display, one wideband O2 sensor, a warning output, and software. The warning output can be used to activate a warning light, enable fuel enrichment, shut down nitrous, or retard timing. Recording can be started by a preset rpm value or switch, and can be played back on the systems or downloaded and graphed to a PC.

1.0 out of 5 stars ( 1 )

$719.99