Availability
Summit Bucks
ACDelco GM Genuine Parts flex fuel sensors will tell you the composition of your fuel. How much ethanol is in your system? Well, you're about to find out. These sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. Allow GM Genuine Parts flex fuel sensors to provide the right answers for you to regain reliable, efficient performance.
( 8 )
$65.99
Summit Bucks
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 107 )
$55.99
—
$79.99
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 522 )
$50.35
—
$78.50
On Sale
For off-road, marine, racing, or other extreme environments, MSD Blaster high-vibration ignition coils are the best choice. Their sturdy metal housing is potted with a premium-grade epoxy to completely encase the coils' primary and secondary windings. This protects the coils from high and low frequency vibrations. Alkyd material is used to form the spark tower because of its high dielectric characteristics. For your convenience, a standard canister-type coil mount can be used, and the coils can be mounted in any position.
( 147 )
$65.35
$58.85
Upgrade from your stock coil to more powerful PerTronix Flame-Thrower II coils. Designed for use with PerTronix's own Ignitor II® ignition systems, these 0.6 ohm coils deliver more than 45,000 V to your plugs for fuller, more complete combustion. Most have oil-filled canisters to keep the low-resistance windings secure and cool for reliable long-term performance. But there also are epoxy-filled versions for when vibration protection is needed. The Flame-Thrower IIs are available in chrome or black (epoxy, black only) and are not for use with original Ignitor ignition systems.
( 285 )
$56.79
—
$66.30
Summit Bucks
Give your ride an attitude adjustment with ACDelco crankshaft position sensors. Your original sensor can become worn or burnt and sensitive to hot engine temperatures, leaving you sitting on the side of the road. ACDelco offers high-quality, direct-fit replacement crankshaft position sensors to respond to your car's needs. Dozens of models are available for fitment on thousands of vehicles from the 1980s and up. Enhance the efficiency and performance of your ride; order the crankshaft position sensor recommended for your application.
( 9 )
$52.99
—
$86.99
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 434 )
$92.25
$55.35
—
$83.05
On Sale
Holley Sniper EFI HyperSpark ignition coils are the perfect ignition upgrade to complement your Sniper EFI installation. This high-output coil produces 135mJ of spark energy when used with the HyperSpark ignition box, ensuring complete combustion. The ignition coil comes self-contained in its own mounting bracket, and mounting hardware is provided to facilitate installation. Holley Sniper EFI HyperSpark ignition coil features: * Works with Sniper EFI for easy plug-and-play installation * Ignition coil connector removes any doubt of loose connections at the ignition coil * Integrated ignition coil bracket simplifies mounting ignition coil
( 44 )
$61.19
$55.05
On Sale
NOS solid-state relays address the need for reliable, rugged, and affordable control of various electrical equipment on your race car. Originally designed to control the high-current switching loads of nitrous solenoids, these relays can also be used to control other high-current devices—such as electric water pumps, trans-brakes, and line locks. NOS relays feature an ultra-low activation/release time of less than 16 microseconds to ensure no delays in reaction times. The solid-state relays can also be Pulse Width Modulated (PWM) with no minimum-duty cycle at frequencies up to 1000hz. NOS solid state relays feature: * 5-20 V DC operation * Rugged solid-state circuitry * Easy 3-wire connection * Included terminated pigtail * Included extra contacts for build-your-own wiring * Ultra-fast activation, under 16 microseconds * Pulse Width Modulation (PWM) compatible * PWM 0-100 percent * Up to 1000hz frequency * Vibration-resistant * Maximum continuous current = 40 amps * Maximum switching current = 20 amps
( 14 )
$92.45
$83.25
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 76 )
$77.99
These Ford Performance Parts spark plug wire sets feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable).
( 702 )
$50.99
—
$92.99
Give your battery extra protection and reduce underhood clutter with Summit Racing™ premium battery boxes. The sealed-type plastic boxes protect your battery from moisture, dirt, and debris, while the vent tube expells battery gasses from the box. They are available in red or black finishes and include mounting hardware.
( 64 )
$93.99
Today we rely on more electronics in our vehicles than ever before, and running power to these extra electronics can be challenging and time consuming. Moroso multi-power battery terminal distribution blocks allow the installer more power options without cutting into the vehicle's wiring harness. Features: * Positive and negative terminals that have power connection points for ring terminals; 5/16 in., 3/8 in., and 1/4 in. * Can be used to replace factory battery terminals or as new battery terminals on a new build or remote battery installation Terminals are machined from billet aluminum and fit both SAE and JIS battery posts Includes hardware
( 17 )
$67.99
Ford Performance Parts has a range of spark plugs to meet your performance needs. Designed for use in engines operated at sustained high rpm or with higher-than-stock cylinder combustion pressures, these plugs are made from quality materials and are designed to provide the spark that you need to fire up your Ford. Depending on the application, features of Ford Performance Parts spark plugs may include: * Available in heat ranges colder than the stock spark plugs * Sold individually and in sets * Pre-gapped at the factory * Offered in a variety of thread sizes * More robust construction for race applications
( 35 )
$56.99
—
$86.99
Summit Bucks
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$53.99
—
$90.99
Summit Bucks
ACDelco engine oil pressure indicator switches are quality replacement parts you can feel good about installing. They offer the fit, form, and function—along with value—you expect and want. ACDelco has a wide selection of components to optimize your GM vehicle's performance, as well as products to cover many other makes and models. Order the ACDelco oil pressure safety switch designed for your specific vehicle.
( 25 )
$60.99
—
$63.99
On Sale
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 289 )
$57.49
$51.75
On Sale
MSD Blaster SS coils fire up your ignition with 40,000 V of power! When used with an MSD 6 Series ignition, these MSD Blaster SS coils delivered 300 milliamps of spark. The coils feature efficient E-core windings, brass terminals, and a durable Rynite housing.
( 173 )
$76.25
$68.65
Secure your battery properly using one of these ICT Billet battery trays. They are manufactured from aerospace-quality billet aluminum, include a top clamp, and are secured with the included durable Grade 8 mounting hardware. The brackets also meet all NHRA/IHRA safety requirements and are available for the most popular aftermarket high performance batteries.
( 46 )
$96.99
—
$99.99
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 21 )
$61.99
—
$77.95
On Sale
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 5 )
$80.49
$72.45
On Sale
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$90.85
$80.45
—
$90.85
On Sale
MSD magnetic pickup tach adapters maintain accurate tachometer readings. If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need one of these tach adapters. These units will correct the operation of most voltage-triggered tachometers that do not work directly off of the tach output terminal of your MSD unit.
( 71 )
$106.95
$96.25
Our Summit Racing™ battery cables are great for installing a battery in your trunk for better weight transfer or a cleaner engine compartment. The cable kits comes with battery cables and hardware.
( 86 )
$65.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
