Availability
Showing In Stock Items. Show All 421 Items.
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$51.19
—
$97.99
These Summit Racing™ GM HEI ignition tune-up kits offer an affordable way to bring your stock GM HEI distributor back to life. They include the following components: * High-power 50,000 V HEI coil * Distributor cap and rotor * Coil dust cover * Low-saturation ignition control module * Adjustable vacuum advance unit * HEI bushing (between the coil and cap) * Wiring harness and capacitor * High performance advance spring and weight set * Mounting hardware
( 166 )
$81.99
—
$83.99
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 379 )
$51.99
—
$79.99
Painless Performance alternator wiring kits are specifically designed for vehicles that demand serious power and are a must if you're upgrading your alternator. They are designed to handle more power from the start to ensure you can keep that hotrod or heavy duty truck on the road where it should be. Don't risk upgrading your alternator without upgrading your wiring, get your Painless Performance alternator wiring kits.
( 47 )
$54.99
—
$79.99
Don't allow your ignition switch to power your electric fuel pump. These Ron Francis Wiring fuel pump relay kits ensure that your fuel pump is receiving full voltage from the battery. These fuel pump relay kits also come with a 30 amp fuse and relay, terminal ends, and all necessary wiring to ensure that your installation goes smoothly. These Ron Francis Wiring fuel pump relay kits will keep your fuel pump working to its full potential and feeding whatever beast you have under the hood.
( 19 )
$56.79
—
$64.63
Install your high-output alternator with American Autowire connection kits. In most cases, your factory wiring chassis harness has only been set up for a factory alternator (100 amps or less). American Autowire high-output alternator connection kits assist in converting to a high-amperage alternator. Kits vary with different wiring, terminals, boots, and more. Detailed instructions are also included in kits to help facilitate the installation.
( 20 )
$62.70
Wire up maximum voltage with Summit Racing™ alternator wiring kits. They include copper-core wire and connectors. If your alternator is putting out the amps, then you need to upgrade your wiring to Summit Racing™ alternator wiring kits—available in lengths and wire gauges to accommodate a variety of alternator amperages.
( 98 )
$60.99
Don't overlook the importance of a starter brace. Many starter problems in off-road applications can be traced to inadequate support for the starter motor. These braces from Chevrolet Performance significantly reduce the load on the starter nose .
( 22 )
$69.99
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$53.98
—
$87.98
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$54.05
These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.
( 133 )
$54.39
Radium Engineering DIY fuel pump wiring kits include the necessary parts to construct a power wiring harness for one fuel pump. The components are of the highest quality to ensure proper operation in all conditions. Features: * Relay and fuse holder are sealed to allow installation in weather exposed areas if necessary * Aircraft grade TXL wiring is resistant to all chemicals and elevated temperatures * Raychem crimpless solder-based butt connectors make reliable wire connections easy and clean * Necessary ring terminals are included for connecting to an external Bosch 044 fuel pump
Not Yet Reviewed
$75.95
When it's time to replace worn-out connections or increase the voltage to your fuel pump, Summit Racing™ fuel pump wiring kits are ready to enhance performance. Factory wiring harnesses are not designed to power high-flow fuel pumps—so our replacements ensure your pump gets the voltage it requires. Summit Racing™ kits come complete with everything you need to wire your fuel pump for increased output.
( 2 )
$76.99
On Sale
Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. The kits include five modules in 200 rpm increments.
( 71 )
$123.95
$61.25
—
$70.62
On Sale
ACCEL points eliminator ignition conversion kits utilize specialized electronic circuitry and an infrared signal to stabilize ignition timing from 1 to 10,000 rpm and offer more accuracy. Put an end to your old-school high-maintenance system with the ACCEL points eliminator conversion kit designed for your application. More product features include: * Reduces maintenance by eliminating the need to change points * Improved performance and fuel efficiency * Latest thermal, clad-based surface-mount construction for maximum dependability * Easy to install with simple hand tools
( 50 )
$111.95
$91.56
ACCEL points ignition tune-up kits offer point sets equipped with extra-thick contact arms to prevent flexing at high rpm. They also feature high-strength phenolic rubbing blocks for superior durability when used with heavier spring tensions. Performance condensers contain special mylar/foil windings to protect your points from pitting. Whether you're looking for the standard or heavy-duty version, ACCEL points ignition tune-up kits are sure to offer long life and great reliability for your classic ride!
( 23 )
$74.29
—
$89.15
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 71 )
$90.05
$53.05
—
$72.45
These Proform HEI distributor upgrade kits feature a 50,000 V coil and premium hi-dielectric caps with brass terminals and a premium rotor. Several color choices are available.
( 4 )
$52.99
—
$62.99
Moroso push/pull battery disconnect mounting kits allow you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. They include the correct brackets, swing arm linkage, an 18 in. long black anodized aluminum actuator tube link, and the necessary bushings and mounting hardware for installation.
( 8 )
$93.99
Breathe some new life into your GM HEI distributor with one of these Proform GM HEI distributor tuneup kits. They include everything you need. Features include: * 50,000 V coil * "No-arc" rotor * Coil dust cover * Low-saturation module * Adjustable vacuum advance unit * HEI bushing * Wiring harness and capacitor * High performance advance springs and weights * All necessary mounting hardware
( 24 )
$89.99
—
$99.95
On Sale
ACCEL heavy-duty distributor cap and rotor kits offer superior protection from "arc-thru" and crossfire. These caps are stress-relieved at the molding to ensure stability and feature a 60k volt-rated alkyd molding compound. Corrosion-resistant brass inserts and steel rotor springs provide high-spark energy flow for the ACCEL heavy-duty distributor cap and rotor kit designed to fit your application.
( 44 )
$53.95
—
$60.75
Replace your worn-out cap and rotor with these distributor cap and rotor kits from Proform. High-output racing ignition systems place severe demands on distributor caps and rotors. High voltage, surges of spark current, and high temperatures all have the ability to turn your run-of-the-mill cap and rotor's molded parts into liquid. These affordable Proform distributor cap and rotor kits are up to the challenge. They are molded from premium alkyd material and have brass terminals.
( 5 )
$92.99
These cap and rotor kits from MSD are replacements for the 44 amp Pro Mags, or the 12 amp band clamp models. The caps are molded form alkyd material and have excellent high-voltage characteristics. Brass spark plug style terminals are used for solid connections and a firm grip to the plug wire terminal. The rotors are injection-molded from Dupont Rynite, a strong glass-reinforced material. Tall vanes are molded on the top of the rotors to stir up the air, preventing ozone buildup and crossfire from occurring. A brass/stainless steel rotor tip is screwed into the rotor, ensuring a long life at high rpm.
( 3 )
$81.05
Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It's time to pull out those ancient contacts and benefit from modern day, digital technology with FAST XR-i Points-to-Electronic Ignition Conversion Kits. The XR-i is a compact module that bolts directly in place of the breaker point assembly. It simply triggers from the factory cam lobe, making installation a breeze with only two wires to connect. The microcontroller of the module manages the signal and dwell time in the coil to produce a much higher output spark that will improve the performance and drivability of your classic as well. Another great feature is a built-in adjustable rev limiter to protect your engine in the event of driveline failure or a missed shift. Features include: * Increased spark output for improved drivability * Pinpoint accurate timing * Better fuel mileage * Faster and more reliable engine starts * Digital and maintenance free * Fully sealed from moisture and dirt * Adjustable rev limiter can be set from 4,000 to 8,000 RPM
( 24 )
$86.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
