Ignitions & Electrical | Summit Racing

Taylor 409 Race-Fit Pro Race Spark Plug Wires

Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.

4.59 out of 5 stars ( 158 )

$74.11

—

$94.97

Taylor 8mm Pro Wire Universal Spark Plug Wire Sets

These sets of 8mm 100 percent pure silicone insulation (designed to withstand over 600 degrees F) with a fiberglass-reinforced jacket and double spring locking spark plug terminals provide a firm grip on plugs. They're offered in two styles--a popular resistor core, which has 40 percent less resistance (and more firepower) than most resistor conductors, and a tinned copper weld wire core, which is for racing applications and where RFI is not a concern.

4.79 out of 5 stars ( 100 )

$65.10

—

$98.79

Taylor Spiro-Pro Spark Plug Wire Sets

Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.

4.63 out of 5 stars ( 671 )

$51.59

—

$97.70

Edelbrock Pro-Flo 3 EFI Fuel Pressure Sensors

Edelbrock Pro-Flo 3 EFI fuel pressure sensors are top-quality replacements for use with the Pro-Flo 3 systems. Affordable and easy to install, these plastic/steel sensors have 1/8 in.-27 NPT threads and include a -6 AN fuel pressure take-off adapter fitting. The sensors help to ensure that your fuel pressure readings are accurate. No laptop is required for installation.

4.0 out of 5 stars ( 2 )

$92.95

Proform GM Licensed Chevrolet Linear Wire Looms

Proform's GM licensed Chevrolet linear wire looms use the valve cover mounting bolts to position them along the valve cover to hold the wires in a neat parallel arrangement. They feature a handsome chrome finish with an epoxy-coated Bowtie emblem that is centrally located for maximum visibility. The wire holders are opened and closed with a patented nylon wedge to permit the chrome tops to have a smooth surface free of screw heads.

4.38 out of 5 stars ( 32 )

$95.95

Proform LS Ignition Coil Brackets

Proform LS ignition coil brackets are designed to mount your ignition coil packs up and off the Proform LS valve covers so that you can view the beautiful Chevrolet logo. They are a unique rail mounting system that directly attaches to the threaded holes on the Proform LS valve covers, and the individual coils attach to the rail so that they can be mounted in multiple positions.

4.56 out of 5 stars ( 16 )

$58.99

—

$59.99

Proform GM HEI Distributor Tuneup Kits

Breathe some new life into your GM HEI distributor with one of these Proform GM HEI distributor tuneup kits. They include everything you need. Features include: * 50,000 V coil * "No-arc" rotor * Coil dust cover * Low-saturation module * Adjustable vacuum advance unit * HEI bushing * Wiring harness and capacitor * High performance advance springs and weights * All necessary mounting hardware

4.58 out of 5 stars ( 26 )

$89.99

—

$99.95

Edelbrock Pro-Flo 4 Ignition Coils

Edelbrock Pro-Flo 4 ignition coils are designed for use with electronic ignitions and produce an impressive 45,000 volts of power. Edelbrock kept the standard cylinder shaped housing and even gave it a satin black finish, so it will look right at home under the hood of your hot rod. These coils are an ideal complement to Edelbrock Pro-Flo 4 EFI systems.

2.14 out of 5 stars ( 14 )

$52.95

Taylor 409 Pro Race Spiro-Wound 10.4mm Spark Plug Wires

Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.

4.71 out of 5 stars ( 304 )

$93.67

—

$98.58

Proform HEI Distributor Upgrade Kits

These Proform HEI distributor upgrade kits feature a 50,000 V coil and premium hi-dielectric caps with brass terminals and a premium rotor. Several color choices are available.

3.75 out of 5 stars ( 4 )

$52.99

—

$62.99

Edelbrock Pro-Flo EFI Replacement Throttle Position Sensors

Edelbrock Pro-Flo EFI replacement throttle position sensors are available for their Pro-Flo and Pro-Flo XT EFI systems. When it comes to components to keep your EFI system working smoothly, Edelbrock has you covered.

4.5 out of 5 stars ( 2 )

$53.95

On Sale

Mallory Pro Wire Spark Plug Wire Sets

Mallory's Pro Wire spark plug wire sets are designed to meet the demands of every performance driving application. These wires feature a high-tech, carbon-impregnated fiber core to deliver energy while suppressing interference for on-board electronics. An 8mm silicone jacket repels water, oil, grease, and fuel, while withstanding temperatures of up to 500 degrees F.

4.78 out of 5 stars ( 9 )

$101.95

—

$110.95

$57.95

—

$73.95

MSD Pro Mag 44 Replacement Cap and Rotor Kits

These cap and rotor kits from MSD are replacements for the 44 amp Pro Mags, or the 12 amp band clamp models. The caps are molded form alkyd material and have excellent high-voltage characteristics. Brass spark plug style terminals are used for solid connections and a firm grip to the plug wire terminal. The rotors are injection-molded from Dupont Rynite, a strong glass-reinforced material. Tall vanes are molded on the top of the rotors to stir up the air, preventing ozone buildup and crossfire from occurring. A brass/stainless steel rotor tip is screwed into the rotor, ensuring a long life at high rpm.

5.0 out of 5 stars ( 3 )

$81.05

Proform Chevy V8 High Performance Distributors

These Proform Chevy V8 high performance distributors have no rebuilt components--they're 100 percent new! Features include: * High performance control module * Hardened gear * Capacitor that prevents radio static * High-dielectric cap with brass terminals * Premium rotor (except where otherwise specified)

2.33 out of 5 stars ( 3 )

$86.99

—

$99.99

Proform Distributor Cap and Rotor Kits

Replace your worn-out cap and rotor with these distributor cap and rotor kits from Proform. High-output racing ignition systems place severe demands on distributor caps and rotors. High voltage, surges of spark current, and high temperatures all have the ability to turn your run-of-the-mill cap and rotor's molded parts into liquid. These affordable Proform distributor cap and rotor kits are up to the challenge. They are molded from premium alkyd material and have brass terminals.

4.2 out of 5 stars ( 5 )

$92.99

Edelbrock LS Pro-Flo 4 EFI Harnesses

Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.

5.0 out of 5 stars ( 3 )

$90.95

Edelbrock Pro-Flo EFI Replacement Intake Air Temperature Sensors

Edelbrock Pro-Flo EFI replacement intake air temperature sensors are available for their Pro-Flo and Pro-Flo XT EFI systems. When it comes to components to keep your EFI system working smoothly, Edelbrock has you covered.

5.0 out of 5 stars ( 3 )

$58.95

Edelbrock Pro-Flo 4 EFI and Max-Fire Bronze Distributor Gears

Edelbrock Pro-Flo EFI and Max-Fire bronze distributor gears are designed specifically for Pro-Flo 4 and Max-Fire distributors. These drive gears are an optional replacement part for the iron gears that come installed on the Pro-Flo 4 and Max-Fire distributors. The bronze gears are intended for high performance and race applications which require distributor drive gears that conform to the camshaft gear. This type of gear is designed to be sacrificial and should be inspected regularly and replaced when worn.

Not Yet Reviewed

$60.95

Taylor Spiro-Pro Race-Fit Spiro-Wound Core Spark Plug Wire Sets

Taylor Spiro-Pro Race-Fit Spiro-Wound core spark plug wire sets outperform the competition in both looks and performance at a price that you can afford. According to Taylor, Spiro-Pro is simply the best high performance 8mm wire you can buy and is a perfect choice for your race or street car. Their Spiro-Wound core is designed for use when RFI suppression is required for today's complex multiple spark discharge systems. Spiro-Pro features two layers of 100 percent silicone to withstand temperatures of up to 600 degrees F without the need for additional sleeving. Each wire is preterminated to a specific length—and features Taylor's all-silicone Pro Boots with double spring-locking spark plug terminals. They're available in a choice of colors. Order the set and options designed for your vehicle and engine application.

4.59 out of 5 stars ( 113 )

$93.85

—

$98.76

Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management System Harnesses

Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.

4.5 out of 5 stars ( 2 )

$59.95

—

$86.95

Motion Pro Rev2 Handlebar Stop/Start Switches

Motion Pro Rev2 handlebar stop/start switches are required for installation of Motion Pro Rev2 or Revolver throttle kits on bikes that come with ignition and starter switches in the stock throttle assembly. Features include: * Fit 7/8 in. bars (22.2mm) * Extra narrow design is only 26mm wide * Push in/out engine switch * Momentary 2-pole starter switch * Starter switch has two separate circuits, one normally open, one normally closed for street bikes that use a headlight/starter cutoff * 550mm long wiring harness with brake light switch circuit wiring * Brake light circuit wiring pigtail 120mm long with female spade connectors * Stainless steel screws and internal rubber pad positions switch on handlebar securely without drilling holes * Wiring harness has bare, tinned wires without connector for easy installation of OE connector body * Made in Italy by Domino

Not Yet Reviewed

$93.49

Taylor Spiro-Pro Spark Plug Wire Rolls

Taylor Spiro-Pro spark plug wire rolls are offered in 30 ft. or 100 ft. lengths of 8.0mm Spiro-Pro or 10.4mm 409-Pro. All are available in a variety of colors to add great looks under the hood, matching their performance.

4.9 out of 5 stars ( 31 )

$59.83

—

$98.79

Taylor Spiro-Pro Universal Spark Plug Wire Sets

Outshine the competition in both looks and performance with Taylor Spiro-Pro universal spark plug wire sets. Order the model that's compatible with your engine application. Features include: * 100 percent silicone inner core and outer jacket * Spiro-wound core consists of highly conductive resistor conductor spiral with stainless steel wire, covered with a fluorocarbon conductive material * More firepower to the spark plugs than OEM resistor core wires, and up to 10 times less resistance than standard resistor core wires * Eliminate radio frequency interference (RFI) * Highest temperature-rated wire on the market (600 degrees F) without the need for additional sleeving * Taylor's exclusive low-profile, vibration-proof, 100 percent silicone Pro Boot with grips * Double spring-locking spark plug terminals * Choice of many vibrant colors

1.0 out of 5 stars ( 2 )

$68.62

—

$97.70

Heatshield Products Pro-Boot Heat Shields

Pro-Boot Shields by Heatshield Products are designed to have a professional look after installation. These innovative spark plug boot protectors are little longer than their original Insul-Boots and engineered for today's DIS ignition systems. Composed of the lava rock-based basalt fiber, they are designed to be 25 percent stronger than their fiberglass predecessors! The Lava fiber also offers some abrasion resistance, and is chemical, oil, and acid-resistant. Additional features include the inner Tac Armor Liner that provides an extra layer of heat insulation for the ultimate spark plug heat shield. These protectors also include a patented hook-and-loop fastener on the spark plug boot cover's wire end that keeps heat, dirt, and debris away from the boot. Enjoy an easy installation and professional look with Heatshield Products Pro-Boot spark plug heat shields!

4.0 out of 5 stars ( 5 )

$93.99

—

$96.99

75 Results Found For "Pro"