Availability
Showing In Stock Items. Show All 69 Items.
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$2,499.95
For years, data loggers have been expensive and complicated for the weekend racer. Good news, Computech has changed that with the cutting-edge technology of DataMaxx bracket kit data loggers, along with user-friendly software, and 24/7 weekend tech support. Datamaxx supplies the essential information need, plus a beautiful dash. You don't pay for anything you're not going to use with this kit; and you have the option to upgrade any time. Computech DataMaxx bracket kit data logger features: * DataMaxx main module * Billet aluminum enclosure * 100 samples per second per channel * Multiple CAN bus connections * Multiple rpm channels, magneto-compatible * Switch input channels * Warning light outputs * Multiple analog channels * Battery voltage channel * Sensors: engine rpm, driveshaft rpm, fuel psi, oil psi, water temp, and single EGT probe Computech DataMaxx LCD dash function features: * 10 channels per screen * Unlimited screen configurations * Customizable shift and warning lights * SD memory card port * Variable speed playback (1/10x, 1/4x, 1/2x, 1x, 2x, 4x, 10x, 100x) * Single cable connection * Day/night brightness modes * Eliminates need for conventional gauges
( 1 )
$2,349.95
Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.
( 1 )
$2,167.43
These Chevrolet Performance Parts LS 376/525 hp engine controller kits are designed for controlling your GM LS 525 hp engine. They include a new controller, engine harness, mass airflow meter, mass airflow meter mounting boss, accelerator pedal assembly, two oxygen sensors, two oxygen sensor mounting bosses, and an instruction manual.
( 1 )
$2,225.39
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
Chevrolet Performance Parts LS controller kits have everything that you need to properly tune your Chevrolet Performance Parts crate engine. Kits include: * ECU * Engine wiring harness * Mass airflow meter * Mass airflow meter mounting boss * Accelerator pedal assembly * Two oxygen sensors with mounting bosses * Detailed instruction sheet
( 1 )
$2,167.43
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$2,549.95
—
$3,849.95
Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.
Not Yet Reviewed
$2,249.95
—
$2,499.95
Chevrolet Performance LT4 engine controller kits are fully integrated, stand-alone kits designed to run LT4 Series crate engines. Each kit features: * Engine Control Module (ECM—unique to LT4 automatic transmission/T56 manual transmission or 8-speed automatic transmissions) * LT4 engine harness—unique to each kit * Mass airflow sensor * Mass airflow sensor bracket * MAF bolt/screw/washer * Accelerator pedal * Oxygen sensors and mounting bosses * Fuel line pressure sensor * Fuel pump power module * Bolt/screw—M8 x 1.25 x 25 * Bolt/screw—M8 x 1.5 x 30 * Emblem * I-sheet (instruction sheet)
Not Yet Reviewed
$3,003.40
—
$3,961.31
HalTech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your HalTech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full VCU manual and software located on the USB key provided with the VCU, or downloadable from the HalTech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device HalTech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.
Not Yet Reviewed
$2,799.00
BluePrint Engines strive to make your LS swap as simple as possible. To that end, BluePrint Engines LS engine compatible controller kits contain all the components and proper calibration to get your engine installed in your muscle car or truck, and have you tearing up the streets in no time. BluePrint takes a complete LS controller package, and specially calibrates the ECU to the optimum tuning required. They also leave the ECU unlocked so your dyno shop can further refine your tune after your swap is complete into your vehicle. Controller kit contents: * ECU * Engine harness * Mass airflow meter and mounting boss * Accelerator pedal assembly * Oxygen sensors and bungs
Not Yet Reviewed
$2,299.00
Chevrolet Performance LS7 engine controller kits are calibrated to run your 2007-2013 LS7 crate engines. These module and harness kits are designed for easy plug-and-play installation, and are inclusive for all components needed to get your LS-family engine running. These Chevy Performance kits include: * Controller * Engine harness * Mass airflow meter and mounting boss * Accelerator pedal assembly * 2 oxygen sensors and bosses * Instruction sheet
Not Yet Reviewed
$2,189.98
These Chevrolet Performance 556 hp LSA engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LSA supercharged Chevrolet engine in your street rod, hot rod, or musclecar.
Not Yet Reviewed
$2,183.46
DiabloSport Trinity 2 Platinum/modified PCM performance kits are designed for those who want the best of both worlds: pre-loaded, high performance tunes and custom tuning capability. They feature the Trinity 2 high-resolution, 5-inch capacitive touch screen with full swipe functionality, industry-leading gauge designs, jaw dropping power potential, and a powerful, yet simple, user interface. These performance kits also include an easy-to-install unlocked PCM to accept the tune and keep your stock PCM safe and unaltered. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows enthusiasts like to bolt-on upgrades and extract every bit of horsepower out of their vehicles. That's where CMR custom tuning comes in. DiabloSport's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport Trinity 2 Platinum/modified PCM performance kit best suited for your ride!
( 1 )
$2,099.95
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 551 )
$2,654.05
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$2,049.95
—
$3,299.95
Ford Performance Parts 2018-20 Gen 3 Coyote control packs are designed to run 2018-20 5.0L Mustang GT Coyote (Gen 3) automatic transmission engines with 10R80 Mustang GT 10-speed transmissions. They include a unique control pack harness, which replaces the stock body harness. These Ford Performance control packs were designed for performance enthusiasts who want the Gen 3 Coyote package in their own custom build. Includes: * PCM with Ford Performance calibration (requires return-type fuel system; not compatible with return-less-type) * Electronic throttle control accelerator pedal, eliminating throttle cable routing problems * OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Power distribution module * Mustang GT air box * Mustang GT air inlet tube * MAF sensor * Upper and lower radiator hoses * HEGO sensors
Not Yet Reviewed
$2,201.99
Ford Performance Parts 2018 Coyote 5.0L control packs take the complexity and mystery out of wiring the engine. These engine management systems include a powertrain control module (PCM) with Ford Performance calibration, as well as an electronic throttle control accelerator pedal (which eliminates throttle cable routing problems). A unique control pack harness replaces the stock body harness and is designed for custom vehicle builds. It features an OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis. Mustang Coyote 5.0L control packs include a power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors. Additional notes: * PCM with Ford Performance calibration requires a return-type fuel system; it will not work with a return-less fuel system * Supercharged versions, modified engines, and modified applications require custom calibration * Installation of this PCM in a 2018 Mustang GT will result in a no-start condition * For 2011-14 engines, use control pack M-6017-A504VA * For 2015-17 manual transmission version control pack, use M-6017-504V * For 2015-17 automatic transmission version control pack, use M-6107-M50A
( 2 )
$2,201.99
Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system
( 1 )
$2,462.99
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,049.95
—
$3,399.95
Looking for a complete monitoring package? Racepak IQ3D Drag Dash bracket bundles combine their popular IQ3 Drag logger dash with the most common V-Net sensors and V-Net extension cable to meet the needs of today's bracket racers. They are compatible with a long list of ECU systems. Racepak bracket bundles include: * IQ3D Drag Dash * Wiring harness (includes 2 programming buttons) * Driveshaft sensor (Note: driveshaft collar sold separately) * Oil pressure sensor * Water temperature sensor * Carburetor fuel pressure sensor and V-Net module * Transmission temperature sensor and V-Net module * 6 ft. V-Net cable * USB programming cable * Racepak Datalink II software * MicroSD card and reader
( 2 )
$2,349.95
Take the complexity and mystery out of wiring your late model, 2018-2023 5.0L Mustang Coyote engine with the Ford Performance Coyote 5.0L control packs! These engine management systems are designed to run Ford Performance 5.0L Mustang Coyote engines. 2018-2023 Coyote 5.0L control packs features: * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal which eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system * Supercharged versions, modified engines, and modified applications require custom calibration Note: Not for use with 2018+ F-150 Engines. Installation of this PCM in a 2018+ Mustang GT will result in a no-start condition.
Not Yet Reviewed
$2,346.99
Are you racing with intelligent power? You should be. Go Lithium 16 V Gen2 battery and charger packages contain lithium racing batteries specifically designed for Drag and Circle Track racers, allowing you to race with a hotter, more consistent ignition spark and no fear of detonation. With an ultra-light weight of 9 lbs. to their incredibly flat energy discharge curve, faster cranking speed, ultra hot ignition spark, and higher sustained voltage, you will be making the same horsepower from the green to victory circle, whether Drag or Circle Track racing. Power, weight, reliability, and a head-turning price you'll love, shouldn't your performance choice be Go Lithium racing batteries? Go Lithium Intelligent Power racing battery packages include high-speed charger with either one or two batteries. Choose your kit. Batteries feature: * No internal wiring * Large scale, high-strength, threaded billet terminals * 1,250 cranking * 20-amp hours of reserve power * Superior prismatic cell technology * 10-year service life * Internal battery management circuitry * Zero voltage sag * Alternator compatible—100 amp maximum with maximum charge voltage of 17.75 * Small impact- and water-resistant case--8.75 in. x 6.95 in. x 3.00 in. Chargers feature: * 16 V high-speed charger * 20-amp hour charge rate * Microprocessor controlled * Multiple LED State of charge indicator * Reverse Polarity Protection Full 1-year replacement and 3-year prorated warranty for any manufacture defects!
Not Yet Reviewed
$2,185.00
Ford Performance Parts 7.3L gas engine control packs include components and harness to install a 2020 to present Super Duty 7.3L gas engine with a 10R140 automatic transmission in a vehicle. The unique control pack harnesses replace the production body harness designed for custom vehicle builds. These kits require use of a conventional return-type fuel system. Note: Installation of PCM in a production vehicle will result in a "no start" situation.
Not Yet Reviewed
$2,285.99
—
$2,396.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
