Availability
Serious racers choose MSD Pro Mag 44--the mother of magnetos. With no magnets to recharge or points to replace, and an amazing 44 amps of primary current, it's no surprise that these magnetos are the choice of nitro-gulping top fuel racers! Pro Mag 44 magnetos are built with an assemblage of rare earth magnets and windings to produce incredible energy. They accurately trigger and distribute this energy on a precision path to your spark plugs, creating a burst of ground-shaking energy in your cylinders. And, for the absolute ultimate in ignition triggering, the Pro Mag 44s' design allows you to add optional accessories--a crank trigger, timing retard control, or even a rev limiter! Forget those weak, inaccurate points and adjustments. Get the most powerful, accurate magnetos with durability to match their performance--the MSD Pro Mag 44 magnetos.
Not Yet Reviewed
$3,749.95
—
$4,199.95
Haltech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full VCU manual and software located on the USB key provided with the VCU, or downloadable from the Haltech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.
Not Yet Reviewed
$2,799.00
HalTech Nexus R5 VCUs feature innovative, yet user-friendly technology, setting a new market standard for engine management and power distribution systems. HalTech Nexus R5 VCUs are 5-in-1 tools; an ECU, a PDM, a high-speed Wi-Fi module, dual channel wideband controller, and a data logger--all natively interconnected with each other and all are programmable with one single piece of software. Features: * 18 Injector drivers * 12 Ignition drivers * 12 8A outputs * 4 25A outputs * 23 AVI * 10 SPI * 8 DPO * 2 Knock control * 2 DBW control * Flex Fuel Support * Inertial measurement sensor * 4-channel oscilloscope * 3 Independent CAN bus systems * Wireless communication * 150 channel, 1kHz data logging with 512mb of logging space * Dual channel O2 wideband controller capable of running LSU4.9 and NTK sensors * Automatic transmission control Nexus R5 kits include: * Nexus R5 VCU * SurLok connectors (red and black) * Wi-Fi antenna RP-SMA 108mm * Mounting bolts * USB-C cable * USB-C dust cap * USB drive with NSP software * Reverse mount VCU label * Quick-start guide and wiring diagrams
Not Yet Reviewed
$4,299.00
HalTech offers a variety of engine management systems, including the Elite 1500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your HalTech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or HalTech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Countless ECU, advanced tuning, and race functions * Outputs: Up to 4 injector and 4 ignition * Suits: Universal 1-12 cylinder or 2 rotor applications * Includes: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit HalTech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. Waterproof USB cap, USB programming cable and USB software key.
Not Yet Reviewed
$2,049.00
—
$2,228.00
HalTech Nexus R5 VCUs with plug and pin set combines the functionality of a power distribution module, a data logger, a dual channel wideband controller, and a state-of-the art engine management system in one powerful device HalTech calls a VCU (Vehicle Control Unit). Features: * 18 Injector drivers * 12 Ignition drivers * 12 8 amp outputs * 4 25 amp outputs * 23 AVI analog inputs with redundancy for electronic throttle and switchable 5 V pullup * 10 SPI synchronous pulsed inputs * 8 DPO low side drive outputs * 2 onboard wideband controllers, supporting NTK and LSU4.9 * 3 CAN ports with switchable termination Nexus R5 kits include: * Nexus R5 VCU * SurLok connectors (red and black) * Wi-Fi antenna RP-SMA 108mm * Mounting bolts * USB-C cable * USB-C dust cap * Plug and pin set: -- AMP 26-pin key 1 and 3 -- 34-pin key 1 and 2 -- DTP-4
Not Yet Reviewed
$4,498.00
HalTech Nexus R5s with universal wire-in harness kit combines the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device--a VCU (Vehicle Control Unit). Included is a harness kit ideal for dedicated race cars, engine swaps and custom wiring jobs. The universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color coded and clearly labeled. Connect your HalTech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! Choose the kit with the universal harness length you prefer. Includes: * Nexus R5 VCU * SurLok connectors (red and black) * Wi-Fi antenna * Mounting bolts * USB-C Cable * USB-C dust cap * Plug and pin set: -- AMP 26-pin key 1 and 3 -- 34-pin key 1 and 2 -- DTP-4 * NEXUS R5 universal engine wiring harness with fire wall grommet 2.5in (63.5mm)
Not Yet Reviewed
$4,874.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
