Availability
Showing In Stock Items. Show All 492 Items.
Keep your Tuff Stuff Performance alternators power-perfect with service help from a Tuff Stuff alternator repair kit. These small parts and/or bearings kits are intended for specific alternator models. Proper maintenance can deliver like-new performance to power your vehicle's electrical components. Order the repair kit recommended for your unit.
( 20 )
$39.99
—
$42.99
Wire up maximum voltage with Summit Racing™ alternator wiring kits. They include copper-core wire and connectors. If your alternator is putting out the amps, then you need to upgrade your wiring to Summit Racing™ alternator wiring kits—available in lengths and wire gauges to accommodate a variety of alternator amperages.
( 98 )
$20.99
—
$39.99
These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.
( 133 )
$28.41
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 379 )
$22.99
—
$41.99
Give your vehicle the power source it needs with Holley alternator pigtails. These weatherproof plug and wire pigtails are designed for select Holley alternators or similar Delco AD-style alternators. They're fairly easy to install--just connect the yellow wire to switched voltage that is "on" when the key is in the run position. These pigtails have a resistor inline, so a charge indicator light is not required. However, if the vehicle has a charge indicator light, the yellow wire can be connected to it and the light will function. So, for high-amp, high-torque solutions for some of today's toughest applications, give Holley a go!
( 41 )
$26.29
Keep It Clean stainless steel door loom kits are designed to hide the wires that normally run through the door jamb. They include a pair of heavy-duty, braided stainless steel hoses and billet aluminum hardware that resist rust for years of beauty. Finish off your doors with Keep It Clean stainless steel door loom kits.
( 13 )
$44.50
—
$45.00
For great firepower, you need all of the spark that you can get. and Davis Unified Ignitions cap and rotor kits from Performance Distributors will give you every jolt that you need. These quality high performance cap and rotors offer up to 50 percent higher dielectric strength and can handle all available voltage. Manufactured using the ideal resin material to handle any system, these rotors have an improved well design to eliminate burn-through, nylon rotor screws to eliminate a "ground" for the voltage to jump at high rpm, and brass terminals on the cap to give you maximum conductivity. These cap and rotor kits are available in a wide selection, including Vortec applications. Plus, many are available in several color choices. Spark your ride into action with Performance Distributors cap and rotor kits.
( 157 )
$31.00
—
$41.75
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$48.96
Painless Performance replacement switch kits are designed to fit street rods and custom applications. They include a 3-position headlight switch, a floor-mounted dimmer switch, GM-style doorjamb switches, and an optional universal ignition switch.
( 18 )
$32.99
—
$39.99
Moroso advance curve kits have three sets of advance springs, which allows you to adjust the rate of spark advance from quick, to super-quick, to ultra-quick. Each weight and centerplate is precision-stamped with smooth edges to eliminate erratic timing. Each kit comes complete with installation instructions.
( 44 )
$21.99
We know you want to get the most out of your ride, so your parts can't just perform--they've got to look good, too. That's why we've manufactured these Summit Racing™ HEI upgrade kits, which feature color-matched components--an industry first! They include an alkyd distributor cap with brass terminal connections, a rotor, a matching coil cover, a cable retention ring, and a high-performance, low-resistance, carbon-to-coil rotor conductor.
( 26 )
$49.99
Proper wiring is crucial to the performance and longevity of your fuel pump. Make sure that your fuel pump is receiving full voltage from the battery with this Tanks Inc. fuel pump relay and wiring kit. This heavy-duty kit will provide a continuous supply of voltage to prevent drop-off that is common with OE wiring, which will protect your fuel pump from damage.
( 5 )
$40.99
These PerTronix billet distributor advance spring kits are designed to adjust the mechanical advance curve. They include three sets of springs to help you get the correct setting. The spring kits are designed to fit PerTronix Flame-Thrower billet distributors.
( 17 )
$22.80
Painless Performance alternator wiring kits are specifically designed for vehicles that demand serious power and are a must if you're upgrading your alternator. They are designed to handle more power from the start to ensure you can keep that hotrod or heavy duty truck on the road where it should be. Don't risk upgrading your alternator without upgrading your wiring, get your Painless Performance alternator wiring kits.
( 47 )
$21.99
—
$34.99
Install your high-output alternator with American Autowire connection kits. In most cases, your factory wiring chassis harness has only been set up for a factory alternator (100 amps or less). American Autowire high-output alternator connection kits assist in converting to a high-amperage alternator. Kits vary with different wiring, terminals, boots, and more. Detailed instructions are also included in kits to help facilitate the installation.
( 20 )
$46.55
Looking for a good cap and rotor for your HEI distributor? These Pertronix caps and rotors are made from a high-dielectric, 60 kV-rated alkyd molding compound to minimize crossfire and "arc-thru." They include nylon rotor hold-down screws, a low-resistance coil brush for a more efficient spark, and brass terminals for a long life.
( 11 )
$45.60
—
$46.15
Our Summit Racing™ one-wire alternator conversion kits will give your engine compartment a much cleaner look. These kits include a new voltage regulator, brush holder, hardware, and easy-to-follow instructions.
( 11 )
$47.99
Summit Racing™ YH and YT Series advance curve kits allow you to adjust the timing to your settings. They include six springs to adjust the advance curve of YH and YT-type Mallory distributors, and eight keys to change the amount of advance in the YH Mallory distributors. Control the advance in your distributor with Summit Racing™ YH and YT Series advance curve kit.
( 16 )
$23.99
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$40.20
—
$48.25
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 71 )
$66.45
$29.95
—
$47.13
Dial in spark advance with Moroso adjustable vacuum advance kits. They allow you to change the amount of ignition vacuum advance for maximum part-throttle performance while preventing harmful effects of detonation--spark knock. These kits can be adjusted as conditions permit; add more for improved throttle response and fuel economy under light loads or less for high loads and high compression engines to eliminate knock. Vacuum advance kits have a built-in stop to prevent the adjustment screw from "backing out" and include Allen wrench and easy-to-follow instructions for a no-hassle install. Get dialed-in for a better run with Moroso adjustable vacuum advance kits.
( 5 )
$43.99
On Sale
These curve kits allow your distributor to reach full advance more quickly (between 2,000 and 2,800 rpm), delivering maximum power and engine acceleration.
( 42 )
$22.72
—
$22.73
Moroso replacement HEI distributor cap and rotor kits are molded from advanced polymers for high dielectric strength and precise timing accuracy. They're direct replacements for your Moroso DuraFire distributor.
Not Yet Reviewed
$48.99
These Mr. Gasket distributor advance kits provide full advance between 2,000 and 2,800 rpm, giving you maximum power and engine acceleration. These kits contain all required weights, springs, and bushings.
( 9 )
$22.72
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
