Availability
Showing In Stock Items. Show All 13 Items.
On Sale
Racepak flow meters provide accurate flow readings for both fuel and hydraulic clutch systems. These general purpose turbine-type flow meters, when used along with DataLink's math channel capabilities, allow you to monitor the health of your fuel pump, as well as confirm the function of your fuel system timers and system lean-outs. Also offered in low-flow versions, those designated as low-flow are recommended for carbureted applications and are calibrated in lbs./hr. unless otherwise noted. Racepak flow meters are available constructed from aluminum for gasoline and nitromethane, and in stainless steel for methanol fuel.
Not Yet Reviewed
$1,399.95
—
$1,449.95
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$1,599.95
On Sale
The name of the game in racing is traction, and keeping your tires firmly planted under all track conditions and surface abnormalities have become a science. Monitoring suspension deflection through shock absorber movement is the common method of tracking suspension and tire performance. Racepak users can employ these shock absorber travel sensors to monitor even the slightest amount of shock travel or tire shake. Shock travel graphs will provide you with the data you'll need to tune 'to the track' more precisely. These door car kits are available for front or rear shock travel. The front shock travel sensor kits contain two 4 in. linear shock travel sensors, two signal conditioning modules, and an analog extension cable. The rear shock travel sensor kits contain two 8 in. linear shock travel sensors, two signal conditioning modules and an analog extension cable.
Not Yet Reviewed
$1,349.95
Keep accurate data of those EGT temperatures with Altronics Red Alert complete systems. They're the first data recording units specifically designed to note the engine cylinder exhaust temperatures (EGT). They can document up to eight EGTs and engine rpm throughout the run. These systems include 8 EGT probes, junction box, interface cables, and downloading kit with software.
Not Yet Reviewed
$1,099.99
—
$1,189.99
FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included
Not Yet Reviewed
$1,348.00
Haltech offers a variety of data acquisition components, including the iC-7 Color Display Dash. With a crisp, clear and full color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: All current Haltech ECUs via CAN. Also Plug-and-Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series (M400,600,800 gold box ECUs), Syvecs. * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (including spare pins for input wiring), DTM-4 to DTM-4 CAN extension cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag * Notes: OBD-II and Stand-alone versions also available.
Not Yet Reviewed
$1,195.00
On Sale
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,599.95
$1,033.95
—
$1,549.95
On Sale
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$1,599.95
—
$1,799.95
$1,438.95
—
$1,618.95
Haltech offers a variety of data acquisition components, including the iC-7 OBD-II Color Display Dash. With a crisp, clear and full-color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. The OBD-II iC-7 is preconfigured to connect directly (via CAN) to most late model vehicles (appx. 2008-on) using the factory OBD-II port. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: Preconfigured to connect directly (via CAN) to most late model vehicles (appx. 2008-on) using the factory OBD-II port * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (includes spare pins for input wiring), OBD-II to DTM-4 CAN cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag
Not Yet Reviewed
$1,195.00
FAST XFI dash data loggers function as both electronic dashboards and data loggers for vehicles running FAST XFI fuel injection systems. Optional accessories, such as the FAST accelerometer, EGT modules, and dual sensor air/fuel meters can all be monitored in combination with XFI-based engine data through the loggers' high-speed CAN bus. With state-of-the art monitoring and data logging capabilities, they can assemble a comprehensive, real-time picture of just what is going on under the hood of your vehicle as it screams down the drag strip. They feature a 6 in., fully programmable LCD touch-screen display and have the ability to display their data in a multitude of scales, units, and gauge configurations for your viewing convenience. The backlit display is highly visible and can be user-customized to a wide variety of configurations at the mere touch of a finger or stylus. The FAST XFI dash data loggers are engineered to work with any level of vehicle modification, from stock to all-out race. They are able to monitor and display output from a variety of different input sources, including frequency (rpm, wheel speed, etc.), analog input, and sources that require programmable input parameters, such as MAP and MAF. As data loggers, they deliver over 1 hour of data logging time with the standard 2 MB memory module; optional memory modules of up to 16 MB are available separately. They do not require immediate data downloads between drag strip runs--all of the data collected over the course of a racing event may simply be stored and then downloaded for analysis at a later time.
( 1 )
$1,069.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
