Availability
Showing In Stock Items. Show All 14 Items.
On Sale
MSD Pro Mag 44 ignition coils are a key part of MSD's Mag 44 ignition system for pro-level drag cars. There's more than a pound of high-quality copper wire wound around the molded DuPont Rynite core in every one, which allows them to handle the 44 amps of output from the system's companion magneto. These coils deliver 50,000 V of long-duration spark to the plugs to ensure that the nitro is ignited. For maximum vibration protection and reliability, the windings and all internals are completely wrapped in rugged epoxy. They're not for use with the Pro Mag 12.
Not Yet Reviewed
$1,199.95
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$1,007.33
—
$1,025.54
MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$1,199.95
MSD Pro Mag 44 electronic points boxes are responsible for controlling the Pro Mag 44's energy, such as the special long duration spark and quick rise time. They feature electronic circuitry that replaces the breaker points. This allows the power of the generator to be released to the coil instantly and at full power. The boxes keep the electricity flowing across the plug for a full 26 degrees of crankshaft rotation, ensuring complete combustion, and they are available with an optional rev limiter.
Not Yet Reviewed
$1,299.95
—
$1,599.95
Jesel Pro Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and are ideal for naturally aspirated engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Pro Series distributor drives also feature Gates PowerGrip HTD belts and use Moroso Ultra Series distributor components. The balanced brass rotor tip and form-staked carbon ball on the coil lug have been designed to eliminate grounding paths and crossfiring.
Not Yet Reviewed
$1,090.00
On Sale
MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.
Not Yet Reviewed
$1,099.95
—
$1,149.95
If you're assembling an aftermarket EFI system, then these MSD Pro-Billet hall effect cam sync distributors are for you! They offer a magnetic pickup to trigger the ignition, and they now have a new hall-effect pickup to set up the cam synchronization for most EFI systems. The MSD Pro-Billet hall-effect cam sync distributors also feature a special built-in LED that illuminates when the sync signal is detected, making setup simple. In addition, the distributors include an adjustable slip collar for compensation in engines with modified deck heights or custom intake manifolds. The MSD Pro-Billet hall effect cam sync distributors' small diameter cap keeps the distributors low in the engine for extra clearance, and a ball bearing guides the QPQ-coated shaft for stable operation through high rpm.
( 2 )
$1,099.95
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,030.54
Clearance
Harness the power of spark energy with ACES Fuel Injection Full House Multi-Coil Ignition Systems! Designed for coil-near-plug engine management systems, such as ACES Fuel Injection Jackpot EFI, GM LS platforms, and most other EFI systems, the Full House ignition helps make unrivaled spark energy and dependability. The Full House has built-in protection for accidental reverse battery connection, over-temperature protection, is fully waterproofed, and has LED diagnostics that can identify a problem with individual coils should one come up. A programmable power setting using the included high-resolution hand-held programmer allows users to switch between 250 to the industry-leading output of 750 millijoules via the hand-held wire or software, making the Full House ideal for street driven race cars. Turn it down for the cruise, and then set it to power mode at the track. Whether it's Pro Mod, Pro Street, or a sled dragging pull wagon, if you need to power your 8-coil ignition reliably, the ACES Fuel Injection Full House is the system for you! Additional features and specs: * 32-bit Power Architecture based MCU for automotive powertrain applications * Robust shielding for anti-interference, high stability hardware and software design * Real-time programmable ignition curve * Hand-held displays calibration data and all parameters in real time * Spark energy is adjustable by the full color, touch screen hand-held and the included ACES laptop tuning software * Eight channels ignition control with over 750 mJ spark energy * High-efficiency alternating current (AC) power delivery * Over 50 Kilovolts output voltage to drive ACES performance coil * Primary voltage over 565 V * Spark duration of greater than 300 microseconds * Operating voltage from 6-22 V * OE Spec waterproofing * Direct plug-in to Jackpot EFI systems * Compatible with most EFI systems using 5 V or 12 V drivers
Not Yet Reviewed
$1,499.99
$1,299.50
Jesel Extreme Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and the ability to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Extreme Series distributor drives also feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications.
( 1 )
$1,140.00
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
MSD MC-4 programmable ignition controls for motorcycles combine multiple spark discharge and digital computer accuracy into one compact ignition system, giving you the best of both worlds. You'll be able to program the MC-4s at the track, on the dyno, or wherever, with or without a computer! The supplied Pro-Data plus software gives you just what you have been waiting for--the ability to program ignition timing curves to suit your engine's needs. These MC-4 ignition boxes are for use with single or dual spark plugs per cylinder, and are 1, 2, or 4-cylinder selectable. Features include: * Computer interface for easy programming * 0-25 degree start retard * Mapable run timing curve * Launch ramp delay by time 0-2.5 seconds * 3-step retards by rpm or switch * 0-2.50 second step retard off delay for precise nitrous control * Progressive timing retard by time for progressive NOS * Launch timing curve to prevent tire slippage * Individual cylinder timing when optional cam sync sensor is used * Gear retard--retard a different amount for each gear * Shift kill feature with programmable delays 20-99 milliseconds * Shift kill modes for manual, auto 1, 2, and auto 1, 2, 3 * Optional boost retard curve when used with an external MAP sensor for turbo applications (2-45 psi) * Built-in rpm-activated window switch--turn "on" any device up to 3 amps at any rpm, then back off at a different rpm * Sequential shift light--turn on an optional shift light at a different rpm for each gear * Sequential shifter turns any air shifter into a fully automatic shifter (3 amps max) * Tach output wire for tachometers or data recorders * Monitor mode for easy setup or 3-step switches
Not Yet Reviewed
$1,599.95
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$1,249.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
