Availability
On Sale
The OEM fuel pressure sensor on the VR30 engine found in the Infiniti Q50 and Q60 and Nissan Z vehicles is a common failure point for many in the enthusiast community, which is why a solution was necessary. The AMS Performance VR30DDTT high-pressure fuel sensors are designed and validated similar to the OEM sensor found in your stock Nissan VR30 engine; however, their improved design allows them to better withstand pressure fluctuations and outlast the stock sensor—especially on modified VR30 engines. They're such an improvement that in product testing, customers have gone from near weekly OEM sensor failures to zero failures with the AMS replacement sensors. Factory fuel pressure sensors have two points of failure: the sensor internals themselves, and the harness connector. The most common is the sensor internals which often fail from large fluctuations of high pressure within the fuel system. These fluctuations are more common on VR30 cars with upgraded fuel systems, especially when running E85, and the AMS sensor's more robust construction helps prevent failures. The connector issue, however, can happen to any vehicle at any level of modification, as the pins within the connector dislodge due to normal engine vibration. AMS Performance VR30DDTT high-pressure fuel sensors rectifies this issue, as well, by featuring a new connector with adapter harness included. Additional details: * Exceptional reliability over the OEM sensor * Fully integrates with EcuTek software * Bolt-in install with plug-and-play harness included
Not Yet Reviewed
$229.95
$195.50
Protect and clean up your underhood wire harness installation with Painless Performance PowerBraid fuel injection harness kits. The braided, laterally split wire wrap closes around the wire bundle without the need for additional taping or fasteners. These kits include wire ties and self-sealing electrical tape to complete the installation. PowerBraid kits feature everything you need in one box to professionally cover any fuel injection harness. Kits include: * 23 ft. of 1/8 in. diameter sleeving * 50 ft. of 1/4 in. diameter sleeving * 12 ft. of 1/2 in. diameter sleeving * 3 ft. of 3/4 in. diameter sleeving * 8 ft. of 1 in. diameter sleeving * 1/4 in. heat shrink tubing * 150 cable ties * 1 roll of electrical tape * 1 roll of stretch and seal tape
( 4 )
$134.99
AEM Electronics 6-Channel CAN sensor modules provide an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to your CD Carbon Digital dash through AEMnet CAN bus. The modules support the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash, or logger. Features include: * Two temperature (thermistor) inputs * Two dedicated 0 to 5 V analog inputs * One dedicated fuel level input (0 to 250 Ohm range) * One tachometer/coil input * Fixed CAN bus speed, header length, and base address * IP67 potted enclosure/sealed connector—dust-tight and protected against water spray * Protected inputs * 12-pin DTM-style connector and pins
Not Yet Reviewed
$189.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$219.95
AEM Electronics inline wideband UEGO controllers give all the benefits of the AEM Electronics wideband Air/Fuel gauges to those who do not require or want an additional gauge in the car. Perfect for datalogging, engine management systems or racing applications where a gauge is not desired. With simple wiring and easy installation, the weatherproof controller can be mounted anywhere in or outside the vehicle. The system features a Bosch sensor with an accuracy of .1 AFR, making it among the fastest and most accurate widebands available. Other features include: * Ideal AFR monitoring tool for EFI and carburated applications, and engine dynamometers * Does not oscillate AFR reading like narrow band sensors * No laptop required for monitoring! * 0-5V analog output included for use with data loggers and virtually any engine management system * Detects AFR sensor problems and outputs error values which can be used to deactivate feedback * Reads Gasoline AFR values from 8.5 to 18:1 AFR * Reads E85 AFR from values 5.7 to 12:1 AFR * Reads Ethanol AFR values from 5.2 to 11:1 AFR * Reads Methanol AFR values from 3.7 to 7.8:1 * Reads Lambda values from 0.58 to 1.22 AFR
( 6 )
$206.95
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 29 )
$133.00
QuickCar ignition control panels feature bridged double-pole switches and large-gauge wires with heavy-duty connectors. These quality components provide better electrical conductivity and bulletproof reliability. Additional features and benefits include: * High-current, specially wound copper wiring provides superior performance * Specially formulated, high-temperature (105 degrees C) insulation is impervious to acids, oils, and fuels * Extra-thick connectors (.040) will not break * All connectors are professionally crimped and soldered for superior tensile strength (15,000 psi) * All connections are insulated with melt-lined shrink tubing instead of hard plastic insulators, which do not seal the connection and often crack when crimped * All connectors are plated with pure 24K gold for improved current transfer and resistance to oxidation
( 117 )
$104.95
—
$255.42
Manufacturer Rebate
Innovate LC-2 Digital Wideband Lambda O2 Controller kits are ideal for applications such as dynamometers, data acquisition systems, stand-alone ECU's, and gauges. They feature self-calibrating circuitry to compensate for changes in temperature, altitude, and sensor condition. These units include a digital input/output, and two full-programmable analog outputs. It can be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with Innovates' Modular Tuning System (MTS). Additional features include: * Patented DirectDigital™ Wideband Technology * Wideband O² Compatible with all fuel types * Ability to calibrate O² sensor for maximum accuracy * Integrated dual-color status LED (Green/Red) * Two configurable linear 0-5v analog outputs * Positive lock connectors for all connections * Innovate MTS serial in/out * Serial connection to your PC * Real-time display data on screen and/or with powerful LogWorks software
( 11 )
$167.99
—
$181.99
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement wideband oxygen sensors are built to fit and function just like the originals. They're designed for use with a wideband controller or gauge. The 02 sensors are available in different models: * Model 010712: Modified NTK LZA08-H5 Suits NEXUS Series devices and used with NTK compatible wideband controllers to measure Lambda Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip. * Model 010714: Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector * Model 010718: Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with factory calibration resistor connector (not a Deutsch DT-6 connector)
( 1 )
$130.00
—
$180.00
Painless Performance 20-circuit pre-wired universal style fuse blocks can be used in any vehicle where upgrading or adding a fuse block is desired—and their compact size makes it super easy to mount them just about anywhere! Simply terminate the circuit and attach it to the 20-circuit fuse block. Painless Performance 20-circuit pre-wired universal fuse block kits include a mounting bracket, fuses, flashers, horn relay, crimp-on style terminals and comprehensive instructions (additional wire not included). Fuse blocks are pre-wired and labeled for the following circuits: * Starting * Air conditioning/heat * Gauges/dash instruments * Brake lights * Headlights * Coil * Horn * Dome light * Radio * Electric fan * Turn signals * Emergency flashers * Wipers * Alternator * Power windows * Power door locks * Electric fuel pump * Backup lights * Cigarette lighter and optional accessories
( 8 )
$236.99
If a car thief finds his way around this security safeguard, just hand him the keys and wave goodbye. Ron Francis Wiring Safe & Sound battery disconnects are advanced technology that lets you completely shut down your vehicle's entire electrical system with one simple click! Just route your main battery cable through a remote cutoff solenoid that you've hidden … then trigger it with the key fob as you walk away. Total power shutdown! These units are also ideal for repair safety purposes and for preventing battery drain over periods of inactivity. For additional security, 4-channel Safe & Sound disconnects can be wired to also control three other items, like windows, door locks, or the fuel pump. You can never take too many precautions with your valuable investment!
( 10 )
$200.85
—
$274.35
Don't take chances with an old, questionable, or malfunctioning knock sensor that diminishes your vehicle's fuel economy, or worse, your engine. The engine knock sensors play a dual role in helping to monitor and protect your engine. Like other sensors, knock sensors monitor engine operation to optimize performance. In addition, knock sensors protect the engine against power-robbing and potentially destructive engine knock. Standard Motor Products replacement knock sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Performance.
( 12 )
$100.99
—
$254.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 37 )
$101.99
—
$242.99
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$299.96
Get rid of laggy acceleration and improve throttle response with AEM Electronics throttle control modules! Utilizing five preset and three customizable throttle curve profiles, the downloadable TCM app for iOS and Android phones can easily and wirelessly tailor your desired driving experience. Installation takes only minutes and plugs inline between your vehicle's accelerator pedal harness—no additional wiring is required. The user-friendly and intuitive AEM (TCM) downloadable app puts you in control, allowing you to dial-in your throttle curve just the way you want! Product features and benefits: * Quick and easy plug-and-play design that is removable without a trace * Works on gas, diesel, alternative fuel and Hybrid vehicles * Improves throttle response and transforms the feel of the vehicle * Multiple switchable profiles including various sport modes, eco modes, and custom maps * Bluetooth iOS and Android mobile app * Custom throttle mapping allows you to perfectly tune your throttle pedal * Works on stock and modified vehicles with electronically controlled throttle * No clunky boxes, wires, or controllers like other devices * Connects to the throttle harness, leaving your OBD-II port free
Not Yet Reviewed
$271.95
Summit Bucks
Clearance
ACDelco Gold remanufactured mass airflow sensors are high-quality replacements for many vehicles on the road today. A key part of the engine management system, MAF sensors measure the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. Remanufacturing the mass air flow sensor is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end-of-line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. Order the sensor recommended for your vehicle.
( 1 )
$153.99
$100.99
—
$204.99
Edge EAS wideband adapter harnesses are designed to be an affordable solution to add a wideband O2 sensor into your Edge monitor (not included). With this input cable accessory, you can view your wideband output from your controller right on your monitor and even data-log with the T2 to view later on Edge Dataviewer software. Monitor your wideband O2 sensor in no time with EAS wideband adapter harnesses from Edge! Additional features include: * EAS wideband adapter harness accessory * Plug-and-play installation * Allows user to easily view Air Fuel Ratio on the Diablo or Edge display monitor (not included) * Compatible with Trinity and Insight devices (sold separately)
Not Yet Reviewed
$174.95
Standard Motor intermotor mass airflow sensors are genuine replacements, with the fit of an OE part. They're 100 percent new units—never remanufactured—so there's no leftover debris that can cause sensor failure. Manufactured to strict quality standards to ensure each part outperforms other airflow sensors in the aftermarket, each unit is computer-tested to ensure the ECU receives accurate airflow readings under hard engine conditions, which are required to balance and deliver the correct air/fuel ratio to the engine in order to achieve clean burns. In addition, the lack of moving parts in the mass airflow unit ensures wear-free sensor life. Order the intermotor mass airflow sensor model recommended for your car, truck, or van.
Not Yet Reviewed
$100.99
—
$173.99
Manufacturer Rebate
Innovate's TC-4 Plus is ideal for applications such as dynamometers, data acquisition systems, or standalone ECUs. They offer crucial benefits for engine tuning and protection by providing high-quality, precise, and fast temperature readings. For turbocharged engines, race cars, and high-performance builds, EGT monitoring is an essential diagnostic tool that goes beyond what a standard air-fuel ratio (AFR) gauge can provide. Additional product details: * The probes are built with durable materials to withstand the extreme temperatures and vibrations found in performance and racing applications * Available individually for replacement or as an added accessory, the probes include a weld-in stainless steel fitting and bung with 6 ft. wire * Innovate's K-type thermocouples are compatible with their range of tuning devices and data loggers, including the TC-4 Plus, LMA-3, and DL-32
Not Yet Reviewed
$109.99
Standard Motor nitrogen oxide sensors are designed to detect NOx levels in diesel-fueled vehicles that must comply with state emissions regulations. These NOx sensors are direct-fit OE replacements for the originals, ensuring proper fit, form, and function, as well as ease of installation. The high-temperature sensors have a plug-and-play design, so no additional programming is required. Order the model recommended for your application.
( 1 )
$117.99
—
$243.99
MotoRad mass airflow sensors precisely measure airflow entering the engine and communicate with the ECU to support optimum fuel combustion. They're engineered to reduce contamination and withstand vibration to maximize durability. All MAF replacement sensors are designed to meet or exceed OEM specifications—and are available for a wide range of vehicles. Additional product details: * Proprietary NTC Technology designed to match OE resistance ensuring the most precise signal to ECU, resulting in optimal fuel/air mixture * 100 percent thermal cycle and sonic nozzle testing, among other tests, ensures worry-free performance and durability * Platinum infused hot wire sensor minimizes corrosion and guarantees a stable reading * Features double wire bonding upgraded to protect against issues caused by vibration * 100 percent new product, not remanufactured * Offered with or without housing assembly
Not Yet Reviewed
$101.99
—
$268.99
NGK Spark Plugs offers NTK automatic transmission speed sensors for a wide range of applications. They measure the rotational speed of the transmission shafts. Input and output transmission speed are monitored and relayed to the engine control module or transmission control module by either an analog or digital signal for proper shift points, speedometer operation and transmission diagnostics. Reasons for replacement include check engine light illumination, poor or erratic shifting, and no or erratic speedometer operation. Additional details: * The NTK Difference: High-strength thermoplastic is resistant to temperature, moisture and chemicals. A pre-installed O-ring precisely matches OE material and diameter for ease of installation and superior sealing. * OE match: Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of the transmission's speed. Sensor output signal matches factory specifications. * Automatic transmission speed sensors send information to the vehicle's control units (ECU, TCU, or PCM) to precisely perform functions such as shift points, ignition timing and air/fuel ratio.
Not Yet Reviewed
$101.99
—
$217.99
Spectra Premium manifold absolute pressure (MAP) sensors work with your intake air pressure to define the proper air and fuel quantities required for the ignition cylinders. They measure the vacuum of the intake manifold (which fluctuates according to engine load) relative to the barometric pressure. Spectra Premium MAP sensors ensure premium performance and durability for you and your ride! Additional features include the following: * Anti-seize thread coating pre-applied on all parts * OE-level reliability and function * All sensors undergo several cycles of thermal shock to ensure reliability in all road conditions * Fit and road-tested to ensure ease of installation and real-world performance * Complete end-of-line testing
Not Yet Reviewed
$104.99
—
$172.99
On Sale
ACCEL SuperBox CD ignition systems provide the perfect blend of value and performance for your street or strip vehicle. Built around durable cast aluminum housings, they can be set for 4, 6, or 8-cylinder applications while easily connecting to points, amplifiers, and magnetic pickup distributors. An adjustable rev limiter on these modern capacitive-discharge ignitions protects the engine in the event of driveline failure or the occasional missed shift. They are also fully adjustable with rotary dials in 100 rpm increments. Additional details: * Multiple sparks last through 20 degrees of crankshaft rotation for improved starting, smoother idle, and throttle response * At low rpm, they fire a series of sparks that ensure better combustion of the air/fuel mixture * Full power output at high rpm * Accessory harness available for plug-and-play on most applications
( 5 )
$239.99
$215.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
