Availability
Showing In Stock Items. Show All 127 Items.
Racepak contact closure driveshaft sensors detect driveshaft or wheel rpm. Designed to work with a variety of Racepak data loggers and dashes, these plastic sensors feature a 5/16 in. fine thread pitch and are triggered using magnets. Monitor your driveshaft's rotation with Racepak contact closure sensors.
( 1 )
$158.95
Proform Mopar licensed high-torque starters spin your engine over faster than stock models. These high-output motors deliver 40 to 50 percent more cranking power, and they're made entirely from new—not rebuilt—components. They feature the retro-style Mopar logo and fit all Mopar V6, small block and big block engines applications from the 1950s thru early '90s. Proform Mopar licensed high-torque starters feature: • 4.41 to 1 sealed gear-reduction drive and full ball bearing construction • Gear reduction-type lightweight-style with natural finish • Cast aluminum mount • For 14.0:1 maximum compression ratio engines • 100 percent new component • Offset design for more oil pan clearance
( 34 )
$211.95
Proform alternators are available for countless vehicles, from the 1950s thru the 1990s. These replacements come assembled and ready to bolt on. They're available in a variety of styles, finishes, amperage outputs, and other options. Select the model recommended for your application.
( 285 )
$122.99
—
$233.95
Wiring Specialties Pro Series coil pack harnesses are designed for a direct drop-in installation. These new nylon loomed harnesses will look and perform flawlessly. Select the ignition coil wiring unit tailored for your year/make and engine application. Pro Series coil pack sub-harnesses feature: * Brand new construction * High-temperature nylon looming with adhesive shrink tubing * High-temperature wire (280 degrees F) * OEM connector specs (no cheap aftermarket connectors that fall apart) * Designed for a factory-like installation * OEM wiring connections and 'T' junctions—no soldered * Fully tested after production for an easy plug-and-play replacement * Turnkey engine start guarantee
( 24 )
$169.00
—
$169.99
Proform high-torque starters are 100 percent new, not rebuilt. They feature an offset design that results in more clearance between the oil pan and the starter. The powerful units are offered in a variety of styles, finishes, and other options for both manual and automatic transmission applications. These replacements are available for countless vehicles from the 1950s and up.
( 113 )
$126.99
—
$238.99
On Sale
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 40 )
$184.95
—
$206.95
Are you building a high-compression, high-horsepower engine? Then you're going to need one of these Proform high-compression racing starters. They're 100 percent new, not rebuilt, and are built from scratch with all-new components. Their torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression ratio. The Proform high-compression racing starters feature an offset design that results in more clearance between the oil pan and the starter. They're available in models for thousands of applications, from 1955 and up.
( 54 )
$143.99
—
$148.99
These Proform electronic distributors are blueprinted and feature a factory-set performance advance curve. They include an adjustable vacuum advance unit and a premium distributor cap and rotor with brass contacts for maximum conductivity. Available for different engines, the Proform electronic distributors will keep your engine running consistently throughout the entire rpm range.
( 97 )
$113.99
—
$138.99
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 164 )
$130.99
—
$244.99
The GM licensed distributors by Proform will give your engine the power and stability that is needed. Proform manufactures these distributors from quality to materials to ensure performance and durability. Other features includes the following: * High performance control module * Melonized steel gear * Sintered steel weights for lighter weight and durability * Adjustable vacuum advance * Bronze sintered bushings * Capacitor that prevents radio static * High-dielectric cap with brass terminals * Premium rotor (except where otherwise specified)
( 25 )
$195.95
MSD HVC coils are designed for racing applications using an MSD 7, 8, or 10 series ignition. Due to their unique design, the Pro Power HVC coils are perfect for long duration racing events or on the street. A spark plug-style terminal is used to grip the secondary wire, and a Weathertight connector is supplied for a positive connection.
( 23 )
$218.95
BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No
( 4 )
$199.95
—
$229.95
Proform's Race HEI distributors are the real deal. They're designed to meet the high-performance demands of racing and keep on ticking. The distributors are built with 100 percent new parts, including the housing for guaranteed durability. They come in your choice of polished or unpolished aluminum housings, and four different cap colors. This distributors produce a 50,000 V spark through 7,500 rpm, for an enormous increase over OE HEIs. Also included are a 50 V coil, true spark alignment for instantaneous response, a high-performance curve, a premium cap with brass terminals, and a low-saturation ignition module.
( 82 )
$104.99
—
$119.99
Proform Mopar Licensed electronic distributor conversion kits are complete high performance packages that will convert your old point-type ignition to a new electronic ignition. Proform kits are made entirely from new, not rebuilt components. Order the model designed for your vehicle make and engine application. Kits include: * Prominently displayed retro-style Mopar logo * Magnetic pickup-type distributor with mechanical and vacuum advance * Electronic control unit box, wiring harness, and ballast resistor * Black female socket-type distributor cap * Detailed installation instructions
( 43 )
$180.95
Proform Mopar licensed electronic distributors are vacuum advance models. Each of these blueprinted distributors is factory set with a high performance advance curve, and each is made entirely from new, not rebuilt, components. Order the model designed for your vehicle and engine application. Proform Mopar licensed electronic distributors feature: * Prominently displayed retro-style Mopar logo * Female socket-type cap and rotor * Magnetic pickup * Made from cast aluminum with natural finish * Electronic control box is required (not included)
( 24 )
$158.95
On Sale
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 33 )
$199.95
$129.95
—
$149.95
It took a technological breakthrough to develop an alternator that's nearly 40 percent lighter than a 10SI that kicks out as many amps! The physics-defying Lightning Bolt design from Proform generates 80+ amps at idle and over 100 amps at the top end—all from a 7 lb., 98mm stator size alternator. These units are light enough for the drag strip, but put out the kind of amps that are needed on the street. On top of that, the Lightning-Bolt has its own unique aluminum housing that certainly will spin a head or two. Whether it's fashion or function you're after, the Lightning Bolt delivers both. These are 12 volt, one-wire hookup alternators. A V-belt style pulley is included, and various serpentine pulleys are sold separately. Lightning-Bolt alternators use the same standard universal mounting configuration as 93mm mini alternators. (NOTE: Model 66437 includes a billet aluminum adapter kit that allows the alternator to fit a standard 10SI mount—6.61 in. center-on-center.)
( 2 )
$252.95
—
$267.95
Manufacturer Rebate
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 297 )
$100.75
—
$257.25
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 156 )
$114.05
—
$179.30
Revolutionize your ride's under-the-hood look with a Proform Slant Edge alternator. A fusion of aesthetic style and performance, these show-stopping alternators are officially licensed Chevrolet Performance Parts products available in a palette of awesome finishes with raised and machined or recessed and hand painted Bowties. However, Slant Edge alternators are not just a treat for the eyes, but also a testament to unparalleled craftmanship. Assembled with 100 percent new components and tested at the factory, they feature an internal regulator, fan, single V-groove pulley, and easy 1-wire hook-up. Additional features, such as a high-output and low-idle drag, ensure that your vehicle will always have the electrical power it needs to run smoothly. Distinctive and diverse, Proform Slant Edge alternators go beyond mere utility; they add flair to function, so your ride can stand out from the rest. Select the alternator in the finish you prefer under your hood.
Not Yet Reviewed
$264.95
—
$274.95
Proform's GM licensed Chevrolet linear wire looms use the valve cover mounting bolts to position them along the valve cover to hold the wires in a neat parallel arrangement. They feature a handsome chrome finish with an epoxy-coated Bowtie emblem that is centrally located for maximum visibility. The wire holders are opened and closed with a patented nylon wedge to permit the chrome tops to have a smooth surface free of screw heads.
( 31 )
$114.95
Manufacturer Rebate
409 Pro Wire sets start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor even bonds pure silicone boots directly to the wires. The results are wires that have a 100,000 V plus dielectric strength rating that gets more spark to your plugs.
( 29 )
$137.94
—
$190.40
Breathe some new life into your GM HEI distributor with one of these Proform GM HEI distributor tuneup kits. They include everything you need. Features include: * 50,000 V coil * "No-arc" rotor * Coil dust cover * Low-saturation module * Adjustable vacuum advance unit * HEI bushing * Wiring harness and capacitor * High performance advance springs and weights * All necessary mounting hardware
( 23 )
$107.99
Edelbrock Pro-Flo 4 fuel pump relay kits were created to handle the high current that your EFI system needs to get the fuel from the tank to the engine. These relay kits help prevent voltage drops to ensure your fuel pump gets full voltage from your vehicle's battery to provide consistent fuel pressure to the regulator. These Pro-Flo 4 fuel pump relay kits are designed to plug into a Pro Flo system and come terminated with a fuse already inline.
( 3 )
$163.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
