Availability
Showing In Stock Items. Show All 53 Items.
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$219.95
—
$224.95
On Sale
When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor
Not Yet Reviewed
$399.95
$219.95
Holley EFI digital dash replacement wiring harnesses keep your gauge panel operating at full capacity. The harnesses are available in terminated or unterminated style—and in individual sections and components, so you can replace only what's needed. Maintain peak performance from your Holley digital dash with replacement wiring designed specifically for the modules.
( 1 )
$149.95
—
$158.95
Lowdoller Motorsports shock travel sensors offer specific features that make them especially effective for performance applications, providing racers with precise data to optimize suspension tuning, diagnose chassis issues, and improve car performance on the track. The sensors are known for their compact size and compatibility with all major data loggers, making them easy to integrate into a performance vehicle's existing electronics. Select the Lowdoller shock travel sensors designed for your vehicle's suspension setup.
Not Yet Reviewed
$103.00
—
$165.00
Manufacturer Rebate
Are you running rich or lean? Innovate oxygen sensors will monitor and tell you just what the facts are. These precision sensors collect and feed the data you need to aid in restoring accurate gauging your fuel mixture. They offer replacement Bosch LSU 4.2 and 4.9 sensors for their digital A/F ratio meter and digital wideband gauges. Plus, Innovate wideband systems allow the sensor to be recalibrated for the ultimate in accuracy, maximum performance, and safety!
( 25 )
$109.99
—
$111.99
Manufacturer Rebate
The acquisition of speed data is important to monitor and provide real-time data to optimize the tuning and performance of your race car. Stack rpm sensors are available in different thread sizes with or without magnets. They will accurately detect revolutions per minute to provide crucial data needed for performance optimization of your race car, as well as enhancing driver feedback. Select the sensor needed for your setup.
Not Yet Reviewed
$146.99
Knowledge is power and AiM Sports vehicle sensors will provide plenty of knowledge. Each sensor is designed to monitor a critical area of your race car, helping you tune your ride for better performance and greater consistency. Each sensor talks to an AiM sports data logger and display, allowing you to see the information in real time or download it later to analyze it for the next heat.
( 2 )
$155.00
—
$190.00
Manufacturer Rebate
Innovate's TC-4 Plus is ideal for applications such as dynamometers, data acquisition systems, or standalone ECUs. They offer crucial benefits for engine tuning and protection by providing high-quality, precise, and fast temperature readings. For turbocharged engines, race cars, and high-performance builds, EGT monitoring is an essential diagnostic tool that goes beyond what a standard air-fuel ratio (AFR) gauge can provide. Additional product details: * The probes are built with durable materials to withstand the extreme temperatures and vibrations found in performance and racing applications * Available individually for replacement or as an added accessory, the probes include a weld-in stainless steel fitting and bung with 6 ft. wire * Innovate's K-type thermocouples are compatible with their range of tuning devices and data loggers, including the TC-4 Plus, LMA-3, and DL-32
Not Yet Reviewed
$109.99
Lowdoller Motorsports infrared tire and track temperature sensors provide real-time, non-contact tire and track temperature data, enabling precise control over tire performance by allowing drivers to monitor and optimize the tire temperature within its optimal grip range. Key benefits include rapid and accurate measurements, the ability to detect uneven temperature gradients across a tire's tread for better suspension and pressure adjustment, and the capability to measure track surface conditions to tailor burnouts and understand overall track behavior. The sensors can also be used for brake temperature monitoring, adding versatility for racing applications. The sensors can be mounted in various locations to allow for flexible application on tires or near the track surface.
Not Yet Reviewed
$164.00
Racepak interface 7-pin cables are available in multiple lengths to extend analog and interface module connections on Racepak V300SD, V500SD and G2X Pro data loggers. They are made of high-quality materials to provide long-lasting durability and performance. If you need to extend your analog or interface connections, Racepak interface extension cables can make it happen.
Not Yet Reviewed
$122.95
—
$133.95
FAST XFI driveshaft speed sensor kits measure driveshaft rpm to provide more accurate data for the traction control unit. Two magnets are fitted to the collar around the pinion yoke, which attaches to the driveshaft. When one of the magnets passes the pickup, it sends a signal to the XFI unit. They then use that signal to calculate both driveshaft rpm and driveshaft acceleration. As a result, these speed sensor kits provide much more precise readings, as opposed to determining driveshaft speed solely through variable engine rpm. The data they provide is perfect for drag race applications. FAST XFI driveshaft speed sensor kits are particularly beneficial for drag racers who need precise data to tune their vehicles for optimal speed and control, and to analyze performance during a run.
( 2 )
$238.95
—
$260.95
FuelTech connector kits are essential components for achieving peak electrical performance and reliability in high performance engine applications. Their FT700 connector kits are recommended for those upgrading to the FT700 ECU and need to modify their existing harness for the new connector. Kits include: * Four FT700 connectors (A, B, C, and D) * 120 FT700 Terminals * One CAN A female connector kit with gold plated terminals * Two CAN B female connector kits
Not Yet Reviewed
$169.00
The EGT (Exhaust/Gas/Temperature) probes from FAST measure the temperature of exhaust gases to provide real-time data for optimizing engine performance, ensuring fuel efficiency, and preventing engine damage. By monitoring individual cylinders, they help identify engine issues like uneven fuel-air ratios and overheating, which can lead to costly component failures. The probes convert this temperature data into an electrical signal, which is then processed by a monitoring instrument like the FAST XFI module and a dash logger to give operators insights into engine health and performance.
Not Yet Reviewed
$163.95
Manufacturer Rebate
Stack's proximity sensors are the suggested sensors for use with their ST3800 Series of electronic speedometers. Offering high performance and easy installation, the sensors are triggered by several targets (suitable metallic objects), producing pulses used to calculate vehicle speed. They have a built-in LED light which can be used to check that mechanical and electrical installations have been performed correctly.
Not Yet Reviewed
$116.99
FuelTech Pan Vacuum sensors are designed to monitor crankcase vacuum inside an engine to ensure piston rings are sealing properly in the cylinders. A correctly sealed engine is vital in achieving maximum performance. One of the best ways to ensure you're keeping that ring seal at its optimum best is with the use of a FuelTech Pan Vacuum sensor. They're made from durable materials with a 1/8 in. NPT thread size to provide accuracy.
Not Yet Reviewed
$179.00
Manufacturer Rebate
The acquisition of speed data is important to monitor and provide real-time data to optimize the tuning and performance of your race car. Stack wheel speed sensors accurately detect rotational speed of a wheel, providing data to the ECU, and enabling racers to analyze the car's performance and refine their car's setup.
Not Yet Reviewed
$157.99
FAST speed sensor loops are magnetic sensors designed for high-performance automotive applications, including drag racing, to accurately measure the rotational speed (rpm) of a vehicle's driveshaft and calculate its corresponding speed and acceleration. By attaching magnets to the driveshaft that pass by a pickup sensor, the system provides more precise data than engine rpm alone, enabling features like more accurate data logging of miles per hour and miles per gallon for the FAST XFI system. Race with the confidence of precise data using FAST speed loop sensors!
Not Yet Reviewed
$137.95
On Sale
AEM Electronics 6-Channel CAN sensor modules provide an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to your CD Carbon Digital dash through AEMnet CAN bus. The modules support the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash, or logger. Features include: * Two temperature (thermistor) inputs * Two dedicated 0 to 5 V analog inputs * One dedicated fuel level input (0 to 250 Ohm range) * One tachometer/coil input * Fixed CAN bus speed, header length, and base address * IP67 potted enclosure/sealed connector—dust-tight and protected against water spray * Protected inputs * 12-pin DTM-style connector and pins
Not Yet Reviewed
$189.95
$170.95
Racepak split collar and magnet assemblies provide mounting platforms for the magnets that trigger the sensor monitoring the revolutions of a shaft. They are typically used on rear-end yokes and couplers to deliver driveshaft rpm data. Racepak collars are available with either two or eight magnets. The 8-magnet collars help detect driveshaft rpm sooner than 2-magnet assemblies and are perfect for automatic transmission-equipped vehicles. Racepak split collar and magnet assemblies are available in a wide range of diameters to fit a variety of applications.
( 5 )
$139.95
Mount your vehicle's data logger the easy way, using the V300SD roll bar brackets from Racepak Data Systems. These lightweight, aluminum brackets are designed to clamp firmly around a chassis tube and provide a pre-drilled and tapped platform for mounting your recorder. Dual recorder mounting holes allow these brackets to be installed on either longitudinal or lateral chassis tube—now that's versatility! The anodized black brackets are offered in different tube diameters.
Not Yet Reviewed
$169.95
Holley's EGT caps are quality replacement service parts designed exclusively for use with Holley's 8-Channel Exhaust Gas Temperature Monitoring kits (sold separately). These EGT caps are made from 316 stainless steel and fit the Holley 1/4 in. EGT bung fittings, They're sold individually or as a set of eight.
Not Yet Reviewed
$135.95
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$104.95
—
$124.95
Racepak contact closure driveshaft sensors detect driveshaft or wheel rpm. Designed to work with a variety of Racepak data loggers and dashes, these plastic sensors feature a 5/16 in. fine thread pitch and are triggered using magnets. Monitor your driveshaft's rotation with Racepak contact closure sensors.
( 1 )
$158.95
Racepak V-Net connector modules are used to convert the CAN data stream into a V-Net CAN bus data stream compatible with the Racepak V-Net system. This data is then available for use with the full range of Racepak V-net devices, including on-board displays, real-time telemetry, and data-logging applications. The Racepak V-Net connector modules provide setup capability to accommodate selection of scaling units, data-logging sample rates, and even custom sensor calibration.
( 2 )
$199.95
—
$259.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
