Availability
Showing In Stock Items. Show All 52 Items.
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 435 )
$54.45
—
$65.35
MSD Blaster TFI coils powers up your Ford ignition system. With windings and construction similar to MSD's Blaster 2 coils, these coils have an increased turns ratio, plus lower primary resistance than your stock coil. MSD Blaster TFI coils will work with stock TFI ignition systems as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your Ford ignition system? Just bolt in one of these MSD Blaster TFI coils.
( 144 )
$78.15
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 196 )
$57.49
—
$66.65
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$90.79
—
$90.85
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$71.75
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$50.99
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 511 )
$57.49
—
$72.45
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 200 )
$69.99
—
$138.99
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 48 )
$59.25
Motorcraft ignition coils are designed to meet engineering specifications for durability and reliability under extreme conditions. If you're experiencing engine misfire and other problems starting your vehicle, these Ford OEM replacement coils may be the solution needed. The ignition coils are quality-made, rigorously tested, and available for many applications.
( 66 )
$54.99
—
$77.99
On Sale
ACCEL points eliminator ignition conversion kits utilize specialized electronic circuitry and an infrared signal to stabilize ignition timing from 1 to 10,000 rpm and offer more accuracy. Put an end to your old-school high-maintenance system with the ACCEL points eliminator conversion kit designed for your application. More product features include: * Reduces maintenance by eliminating the need to change points * Improved performance and fuel efficiency * Latest thermal, clad-based surface-mount construction for maximum dependability * Easy to install with simple hand tools
( 50 )
$111.95
$89.95
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$84.99
On Sale
MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.
( 151 )
$65.85
Motorcraft ignition modules are designed to operate under a wide range of temperatures. They help to ensure that you will not be plagued with premature firing, misfiring, or shutdowns resulting from transient outside signals. They meet vehicle requirements for government fuel economy and emission standards.
( 6 )
$52.99
—
$69.99
Don't take chances with an old or questionable ignition control module that can leave you stranded. Standard Motor Products replacement ignition control modules are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's ignition needs to Standard Motor Performance.
( 38 )
$60.99
—
$69.99
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 92 )
$51.75
—
$79.09
On Sale
ACCEL Ford EEC-IV Super Coils offer increased throttle response, idle quality, and starting. Their E-core design maximizes energy and voltage output. ACCEL Ford EEC-IV Super Coils are direct bolt-in and plug-in replacements for use with computerized ignitions and Ford TFI distributors. They'll get you the spark you need and the performance you want.
( 25 )
$84.85
$63.64
FAST PS20 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 12 )
$55.95
ACCEL points ignition tune-up kits offer point sets equipped with extra-thick contact arms to prevent flexing at high rpm. They also feature high-strength phenolic rubbing blocks for superior durability when used with heavier spring tensions. Performance condensers contain special mylar/foil windings to protect your points from pitting. Whether you're looking for the standard or heavy-duty version, ACCEL points ignition tune-up kits are sure to offer long life and great reliability for your classic ride!
( 23 )
$86.95
Mallory's steel distributor gears are precision-machined from alloy steel to exacting OE specifications. The gears have been heat-treated to ensure the proper hardness and deliver trouble-free service when used with the proper cam.
( 11 )
$79.85
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 41 )
$81.63
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$64.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 100 )
$67.99
—
$150.99
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 70 )
$70.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
