Availability
Showing In Stock Items. Show All 38 Items.
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 443 )
$54.45
$49.05
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
On Sale
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 274 )
$439.99
$395.99
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 93 )
$45.98
—
$79.09
$34.49
—
$71.15
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$155.95
$140.35
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$53.75
$48.35
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$499.95
$448.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
$103.45
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$649.95
$583.95
On Sale
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$52.69
$47.45
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$51.45
—
$273.00
$46.31
—
$245.70
On Sale
ACCEL heavy-duty distributor cap and rotor kits offer superior protection from "arc-thru" and crossfire. These caps are stress-relieved at the molding to ensure stability and feature a 60k volt-rated alkyd molding compound. Corrosion-resistant brass inserts and steel rotor springs provide high-spark energy flow for the ACCEL heavy-duty distributor cap and rotor kit designed to fit your application.
( 44 )
$52.65
$47.35
On Sale
ACCEL ignition contact points are equipped with extra-thick contact arms to prevent flexing on the top end. Their large, radiused tungsten contacts provide crisp circuit breaking for peak coil output. They also feature high-strength phenolic rubbing blocks for superior durability when used with heavier spring tensions.
( 10 )
$59.25
$53.35
On Sale
Superchips 3.6L V6 coil packs can yield impressive results when used to replace or upgrade your older, worn-out ignition coils. Designed for the 3.6L V6 engine found in thousands of Chrysler, Jeep, Dodge, and Ram vehicles, these coils improve cold starts and provide a smoother running engine. Available in six packs, or individual replacements, Superchips 3.6L V6 coil packs are a surefire way to put some new spark in your ride while adding some underhood flair! Other product features include: * Increased spark energy * Optimized cores and windings * Epoxy-filled housings * Simple bolt-on upgrade * Yellow housing for increased aesthetics.
( 3 )
$224.95
$202.45
On Sale
XS Power XV Automotive Series lithium batteries are lightweight, powerful, and offer five times the life over lead acid and AGM batteries. These Lithium Titanate batteries are available for automotive applications in many common BCI group sizes for a direct fit in your vehicle.
( 5 )
$499.99
$459.99
On Sale
SCT replacement micro USB cables provide connections for TSX, X4, and Livewire TS+ computer programmers. The cables enable you to adapt from a regular sized USB port to a micro size port.
Not Yet Reviewed
$8.99
$8.09
On Sale
aFe Scorcher GT modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin on-the-fly power adjustments. The four power settings are adjustable with one button, and the LED light indicates the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher GT modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure, improving vehicle efficiency, power, and throttle response. The tuner components are housed in a black powdercoated aluminum casing—with connectors that require no modification to your factory harness; they plug directly into the stock wiring harness connectors and sensors. Order the computer module designed for your vehicle application.
( 1 )
$384.00
$345.60
On Sale
Superchips Jeep Flashcal tuners are the best calibration tools on the market today. They take full advantage of the most popular aftermarket upgrades you crave for your late model Wrangler. Superchips did their homework and came up with a hand-held computer programmer to unlock the hidden treasures that will impress your friends. Flashcal tuner features: * Corrects speedometer for tire upgrades * Speedometer recalibration for gear/axle swaps up to 5.38 * Transfer case Hi and Lo locking options * ESP stability optimization * Engine idle adjustability for winching * Street legal TPMS adjustability (off-road options available for download) * Daytime running light options (2011-12 models only) * One-touch lane change * Radio delay options * Headlamp delay options * Horn chirp and exterior lighting flash options when locking doors with keyless entry * Reads and clears diagnostic trouble codes * Internet updatable
( 18 )
$325.95
$293.35
On Sale
SCT magnetic windshield mounts feature heavy-duty suction cup bases that securely adhere to windshield glass and four ultra-strong neodymium magnets that ensure your device stays front-and-center--no matter what terrain you travel. Each of these SCT BDX window mounts include a 90 degree HDMI elbow that not only eliminates potential strain on your port, but also ensures your wires stay tucked perfectly for the cleanest setup around.
( 1 )
$25.79
$17.99
On Sale
Superchips Pulsar XT computer programmers are innovative inline modules engineered to keep your factory PCM untouched, with no PCM swap or unlock required to add up to 20 hp/30 lb.-ft. of torque. Pulsar XT interacts with sensors under the hood and your PCM signals to enhance the drivability, power, and torque, which can all be operated from the steering wheel controls. This all-new take on performance and calibration lets you enjoy shift-on-the-fly performance gains, with calibration adjustment for larger tires, gear ratio changes, TPMS adjustments, and Auto Start/Stop disable all in one easy-to-use device. Pulsar XTs can also be used to read and clear Diagnostic Troubles Codes and are easily removed for dealer/warranty work with no traces left within the system. Features: * User-adjustable power levels via cruise control buttons * Adjustable power levels on-the-fly * Tire size: 20 in. to 49.9 in. * Gear ratio: 2.00 to 5.99 * Improves economy, towing capabilities, and performance * Performance levels 1 to 5, with incremental power gains * Power level displayed on OEM dash * Tire pressure adjust 20 to 69 psi
( 3 )
$649.95
$583.95
On Sale
Hypertech REACT Performance throttle enhancers put complete throttle response control at your fingertips. With throttle curves designed to provide a more exciting ride, these innovative optimizers deliver fully customizable power with a simple knob that lets you switch between multiple modes and throttle intensity on-the-fly. Installation is easy—completely plug-and-play with automatic setup sequence, and a magnetic A/C vent mount. Also, Hypertech REACT throttle enhancers will not void your factory warranty. Order the model recommended for your specific vehicle. Features of Performance throttle enhancers: * Modes: Track, Sport, Street, Economy, Stock * Pressing the knob clicks between each drive mode curve * Rotating the knob up increases throttle intensity, rotating down decreases throttle intensity * On-the-fly adjustments * LED setting indicators * Multi-level safety protection—incorporates multiple checks of the accelerator pedal signals coming and going from the microprocessor inside * Custom tuning software * Internet updateable
( 2 )
$299.95
$239.96
On Sale
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$284.96
$256.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
