Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
HONDA ODYSSEY Sensors
Showing In Stock Items. Show All 95 Items.
NTK Oxygen Sensors
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 85 )
$114.99
Bosch Premium Original Equipment-Type Oxygen Sensors
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 178 )
$54.99
Clearance
Denso Oxygen Sensors
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$34.99
—
$544.99
Bosch Premium Universal Type Oxygen Sensors
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$66.99
—
$76.99
JET Powr-Flo Mass Airflow Sensors
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$218.99
DC Sports Oxygen Sensor Extension Harnesses
Extend your O2 sensor wires safely with DC Sports oxygen sensor extension harnesses. They are quality harnesses offered in a choice of lengths to suit your application and needs.
( 3 )
$3.79
Denso Air/Fuel Ratio Sensors
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$96.99
—
$135.99
Standard Motor ABS Speed Sensors
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$27.99
—
$291.99
Clearance
Astemo Mass Air Flow Sensors
Astemo offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 5 )
$73.99
—
$75.99
Denso Crankshaft Positioning Sensors
Denso crankshaft positioning sensors detect crankshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso crankshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the crankshaft--a design almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$61.99
—
$122.99
Standard Motor Battery Current and Voltage Sensors
Standard Motor battery current and voltage sensors measure the temperature of the battery, regulating voltage to the vehicle charging system to function properly at all times. Standard Motor ensures these sensors are direct-fit, by testing every unit before it is packaged. These sensors are unrivalled for fit, form, function, and quality. Replace your worn or faulty battery current and voltage sensor with one from Standard Motor.
Not Yet Reviewed
$128.99
Beck/Arnley Vehicle Speed Sensors
Replace your worn or malfunctioning vehicle speed sensor with one of these Beck/Arnley vehicle speed sensors. Depending upon your vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air-control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points.
( 1 )
$44.99
—
$57.99
Holstein Parts Knock Sensors
The knock sensor is able to detect mechanical stress and produces a voltage when the car knocks or pings. Under heavy acceleration, it sends signals to the ECU and the ECU retards the ignition timing to compensate for the knocking, which in effect protects the pistons and rings from damage. Knocking also occurs when using low-grade fuel and having the knock sensor allows you to use different grade fuels without causing engine damage. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts knock sensors line has superior coverage for domestic and import applications.
( 3 )
$18.99
—
$41.99
Delphi Camshaft Position Sensors
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$34.99
—
$86.99
Delphi Ignition Knock Sensors
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 31 )
$14.99
—
$26.99
Beck/Arnley Engine Coolant Temperature Sensors
Having difficulty starting in cold weather? We're referring to your car, not you. Or, maybe you're seeing readings of overheating when all is normal. If your engine is giving questionable temperature readings or having trouble starting or running, you may need a new Beck/Arnley engine coolant temperature sensor. These quality-made sensors will signal your car's computer with the correct operating temperature to get the right amount of air and fuel flowing. Replace corroded sensors with Beck/Arnley engine coolant temperature sensors.
( 2 )
$20.99
Clearance
Holstein Parts Vehicle Speed Sensors
Vehicle speed sensors measure wheel speeds and provide this information to the vehicles ECU (Electronic Control Unit). The ECU then calculates ignition timing, transmission shift points, and air/fuel ratios for the vehicle. Data from the Vehicle Speed Sensor is also used in cruise control systems to maintain a constant speed. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts vehicle speed sensors line has superior coverage for domestic and import applications.
( 4 )
$18.99
—
$47.99
Denso Camshaft Positioning Sensors
Denso camshaft positioning sensors detect camshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso camshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the camshaft--this design is almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$72.99
—
$95.99
Clearance
Delphi Oxygen Sensors
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$72.99
$41.50
—
$230.99
JMS Chip PedalMAX Drive-by-Wire Boosters
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 56 )
$289.75
Clearance
Holstein Parts Crankshaft Sensors
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$57.99
$17.50
—
$40.50
Hella Inteligent Battery Sensors
Weak batteries are one of the main reasons why vehicles break down, so efficient energy management is of great importance. Hella intelligent battery sensors (IBS) reliably and accurately measure battery voltage, current, and temperature parameters, sending the information to your vehicle's computer system to ensure your battery is functioning properly and your vehicle is running smoothly. Make a smart choice for your vehicle; choose Hella IBS. Benefits: * Reliable measurement of the parameters: state of charge (SOC), battery health (SOH), and calculation of expected starting ability (SOF) * Versatile design and support for numerous battery models * Direct integration in the vehicle electrical system via the LIN protocol * Precise shunt-based measurement of current within high-voltage applications and batteries with insulation * Vehicle-specific design for a 1:1 replacement
Not Yet Reviewed
$75.99
Delphi ABS Wheel Speed Sensors
Delphi ABS wheel speed sensors meet your OE requirements and those of your wallet. Delphi speed sensors provide accurate, clean signal input to your vehicle's ECM. Designed for the maximum signal to noise ratio, these ABS wheel speed sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. When it's time to replace, choose Delphi ABS wheel speed sensors for reliability and superior drivability.
( 1 )
$17.99
—
$88.99
Delphi Crankshaft Position Sensors
The Delphi crankshaft position sensors offer several benefits including enhanced durability, accurate readings, and improved emissions control. They are designed to withstand temperature fluctuations and are tested to meet or exceed original equipment (OE) requirements. These sensors contribute to optimal engine performance, reliability, and drivability by providing precise position and speed data to the engine control unit. Select the Delphi crankshaft position sensor designed for your application needs.
Not Yet Reviewed
$36.99
—
$54.99
