Availability
Showing In Stock Items. Show All 40 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1967 )
$140.95
—
$190.95
$126.85
—
$171.85
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
On Sale
Professional Products Chrysler Powerfire ignition coil packs are designed to give your ignition system a shot in the arm. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution.
( 32 )
$216.99
$195.29
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$225.15
—
$249.95
$123.95
—
$224.95
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$128.90
—
$239.25
$116.01
—
$215.32
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$151.70
—
$201.55
$136.53
—
$181.40
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$223.85
$201.46
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$123.05
—
$257.25
$110.74
—
$231.52
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 803 )
$114.95
—
$282.75
$103.45
—
$212.95
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$183.50
—
$246.10
$165.15
—
$221.49
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$191.95
—
$231.95
$105.95
—
$208.75
On Sale
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$214.80
$193.32
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 648 )
$125.15
—
$203.15
$112.64
—
$182.84
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
—
$249.95
$178.95
—
$224.95
On Sale
Holley Hemi V8 ignition coil adapter harnesses let you take charge of your engine by controlling both fuel and spark. They are built to fit and function with the factory harness. The harnesses feature TXL-grade copper wiring with minimal weight, plus high-temperature sleeves in a small diameter. Factory-style terminations provide a strong, secure connection.
( 1 )
$199.95
$179.95
On Sale
Superchips 3.6L V6 coil packs can yield impressive results when used to replace or upgrade your older, worn-out ignition coils. Designed for the 3.6L V6 engine found in thousands of Chrysler, Jeep, Dodge, and Ram vehicles, these coils improve cold starts and provide a smoother running engine. Available in six packs, or individual replacements, Superchips 3.6L V6 coil packs are a surefire way to put some new spark in your ride while adding some underhood flair! Other product features include: * Increased spark energy * Optimized cores and windings * Epoxy-filled housings * Simple bolt-on upgrade * Yellow housing for increased aesthetics.
( 3 )
$224.95
$202.45
On Sale
K&N throttle control modules are designed to improve throttle response and acceleration, as well as pedal sensitivity without modifying factory ECU settings. These modules process input data from the gas pedal and bypasses the factory signal to your vehicle's ECU, sending a modified signal directly to the throttle body. This creates an increase in throttle responsiveness that will make your car feel like a whole new machine. Features and benefits: * Easy plug-and-play installation * No software required and can be tuned on the go * Sends a modified signal directly to the throttle body * Includes the module, wiring harness, adjustable dial, hardware, and instructions
Not Yet Reviewed
$314.99
$264.99
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
—
$239.25
$201.46
—
$215.32
On Sale
Holley EFI Gen III Hemi VVT and SRV harnesses offer control. 2009+ Gen III Hemi engines rolled off the showroom floor with Variable Valve Timing (VVT). Now, both Holley Terminator X and Terminator X Max ECUs will allow you to control and tune the VVT with the use of the plug-and-play VVT harness. But the fun does not stop there! If you are using a stock intake manifold that came from the factory with the Short Runner Valve (SRV), Holley also has a plug-and-play sub harness that will allow you to utilize the SRV actuator and capitalize on its low rpm torque benefits. Features: * Plug-and-play with the factory Gen III HEMI VVT sub-harness, and any Holley EFI HEMI main harness connecting to the power tap and input/output connectors * Provides control of VVT solenoid under the intake manifold * SRV (Short runner valve) connector pre-wired into the sub harness allowing you to simply plug into the factory SRV actuator in the intake manifold
Not Yet Reviewed
$163.95
$147.55
On Sale
ACCEL SuperStock 5000 Series spark plug wire sets are available in many sizes, styles, and colors to cover most any needs and vehicles. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response, and reduced emissions. The wires feature silicone construction and are rated for 450 to 550 degrees F (depending on the set). The wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Choose your set.
( 51 )
$112.95
$101.65
On Sale
Edge EAS power switch kits are a tremendous new feature for truck owners. Customers can now hook up accessories like aftermarket lights, air compressors, etc., and engage them from their CTS/CTS2 device. Install the new switch and either use the Edge MyStyle software to name your accessory—or with the CTS2 to rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to six gauges and four rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off.
( 2 )
$159.95
$143.95
On Sale
Slip on a set of PowerCables spark plug wires from JBA Performance Exhaust to up the game of your ride! These plug wires feature 100 percent silicone jackets and unique boot ends that are designed to offer maximum clearance, while withstanding severe wear and tear for a longer lifespan. Don't put old spark plug wires on your new fully equipped engine when you can add JBA Performance Exhaust PowerCables spark plug wires for better performance and the reliability you expect! Features and benefits: * Extra thick diameters * Ultra-low resistance design * Wire wound mag conductors * Custom tailored lengths with cylinder I.D. labels * Improved under hood appearance * Resistant to heat and abrasion * Improved performance through ignition system * Superior Electro Magnetic Interference (EMI) suppression
( 55 )
$112.45
—
$167.60
$101.20
—
$150.84
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
