Availability
Showing In Stock Items. Show All 13 Items.
Painless Performance 21-circuit Mopar color-coded universal wiring harnesses can be used in almost any application where you want Mopar color-coded wires. They eliminate the troublesome bulkhead connector and use a unique covered micro-fuse block. Also featured is an auxiliary circuit with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers
( 27 )
$599.99
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$678.95
—
$799.95
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$540.97
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 403 )
$549.95
—
$579.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$599.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$599.95
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$579.95
Tru Trac billet alternators from Billet Specialties are designed for use with their Tru Trac serpentine kits. These beautiful alternators feature CNC-machined billet aluminum housing and a 140 amp, 1-wire hookup. Each of these units includes a Proof-of-Performance tag.
( 5 )
$793.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
