Availability
Showing In Stock Items. Show All 120 Items.
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 401 )
$380.95
—
$499.95
Lingenfelter TRG-002 58x-24x crank sensor trigger conversion modules have been designed using the latest automotive qualified components with extended temperature range operation. A fast 16-bit microcontroller with an enhanced timer system is utilized to achieve precise signal timing for late model GM engine applications. The Lingenfelter TRG-002 conversion modules allow Gen IV GM V8 engines with the 58X crankshaft trigger wheel and the 4X camshaft timing gear to be installed in earlier vehicles designed to accept the 24X crankshaft trigger wheel and the 1X camshaft trigger wheel--without having to take the engine apart to change the camshaft timing gear or the crankshaft reluctor wheel.
( 31 )
$303.99
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 327 )
$649.95
$357.95
—
$499.95
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$271.99
—
$306.99
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$349.95
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 123 )
$449.95
—
$499.95
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$449.95
—
$513.95
Replace your stock LT1 Optispark distributor with our all-new Summit Racing™ LT1 Optispark I or II distributors. These distributors feature an aluminum housing with heavy-duty oilite bushings, and a glass-reinforced cap with high dielectric strength and aluminum terminals.
( 121 )
$261.99
On Sale
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$435.95
—
$477.95
On Sale
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 23 )
$277.99
$250.19
—
$359.99
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 36 )
$499.95
—
$528.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$699.95
$384.95
—
$524.95
Gain serious firepower with GM Street/Strip D.U.I. distributors from Performance Distributors. These fire sticks have everything you need for your ignition in one simple, but strong unit. They offer an easy, one-wire hookup--no external coils or spark boxes, just one 12 V hot wire hookup for 50,000 V of pure spark energy and a cleaner, crisper, more powerful-running engine. Their Dyna-Module, along with the high-voltage coil, allows spark plug gaps to be opened up, increased dwell for longer-duration spark, and the most complete combustion of your fuel mixture for increased horsepower and torque. Plus, the caps have brass terminals for optimum conductivity and are available in several colors, including clear, so you can see the firepower at work. Feel the power; experience Performance Distributors GM Street/Strip D.U.I. distributors.
( 143 )
$349.00
—
$459.00
Ahoy! If you're looking for a simple, powerful solution for high performance boating, then these Davis Unified Ignition marine D.U.I. distributors from Performance Distributors are the answer. These virtually waterproof and vibration-proof distributors are easy drop-in units with one-wire hookup. There are no wiring hazards to leave you adrift and no hassles! The electronic Dyna-Module and high-voltage coil are built inside of the distributors and produce a longer spark duration, allowing you to widen your plug gap and get a more complete fuel burn. Marine D.U.I. distributors are available in performance versions that crank up to 7,000 rpm and racing versions at 10,000 rpm. D.U.I. distributors are calibrated by machine to dial-in the smoothest advance curve for your application. They are hand-assembled, polished, lubed, and checked for exact tolerances, and the housings are drilled with flame arrestor holes. All of these features allow you to navigate with instant throttle response and more power. Whether you're taking a leisurely ride around the lakes, offshore cruising, or running the waves, anchor your boat with high performance marine D.U.I. distributors from Performance Distributors.
( 72 )
$399.00
Manufacturer Rebate
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 355 )
$305.26
—
$464.15
On Sale
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 55 )
$476.95
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1224 )
$264.99
—
$346.99
Finish the swap from fuel injection to a carburetor and distributor using a Summit Racing™ LS front drive distributor timing cover conversion kit. Our front cover and gear assemblies allow you to run your LS-style engine in classes that require a distributor ignition system, while relishing the simplicity and tuneability of a distributor and carburetor. Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits: * Aluminum timing chain cover * Distributor drive gear assembly * Fuel pump eccentric * Color-coded spacers * Front cover crankshaft seal * Adjustable timing pointer * Necessary hardware
Not Yet Reviewed
$448.99
MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.
( 32 )
$468.95
—
$499.95
Granatelli Motor Sports Street Fighter coil packs offer true high performance featuring advanced bobbin technology, a specialized magnetic steel core, and optimum windings. These features result in higher energy and voltage outputs, plus arc duration. Installation is easy, too--they're direct bolt/plug-in units.
( 25 )
$358.55
Upgrade your ignition to the power and performance of a Summit Racing™ system. Our ignition system combos for Chevy V8 feature a Summit Racing™ multi-spark digital capacitive discharge ignition box (with or without rev limiter), a Summit Racing™ billet distributor or blueprinted HEI distributor, and our 51,000 V, 260 milliamp ignition coil (the HEI kit does not include the external coil). The epoxy coil has E-core windings, stud terminals, and an extruded aluminum mount. It measures 3.228 in. tall x 4.553 in. long x 4.519 in. wide.
( 38 )
$317.98
—
$437.97
Lingenfelter timing retard launch controllers can be used to provide consistent launch rpm off of the line in drag racing and other standing start racing applications. In turbocharged applications, they can help build additional boost off of the line. The controllers can also be used as an adjustable individual cylinder rpm limiter, providing reliable and fast-acting, spark-based engine rpm limit control.
( 28 )
$300.15
—
$446.45
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 3 )
$299.99
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$499.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
