Filters
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 981 )
$117.95
$106.16
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 202 )
$135.95
$122.36
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 288 )
$174.95
$157.46
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 337 )
$364.95
—
$410.95
$328.46
—
$369.86
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 82 )
$210.95
$189.86
On Sale
PerTronix's Flame-Thrower Street/Strip HEI distributors will produce 67 percent more energy in the coil, and deliver twice the energy across the spark gap. Plus, they deliver misfire-free performance up to a minimum of 7,500 rpm, a 3,000 rpm improvement over most original HEIs. Each distributor uses a new aluminum housing, cast and machined from a strong but lightweight A384 alloy. High-quality bronze sintered bushings are installed, aligned, and bored for accuracy and extended mileage use. Features include an adjustable vacuum advance, a high-performance mechanical curve kit, aluminum housing, a high dielectric strength cap with solid brass terminals, a balanced rotor, and a centerless-ground shaft.
( 48 )
$331.45
$298.30
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 29 )
$179.95
$161.96
On Sale
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 62 )
$74.95
—
$90.45
$67.46
—
$81.40
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.
( 133 )
$408.45
—
$495.95
$367.60
—
$446.36
On Sale
Pertronix Flame-Thrower EST performance distributors for GM late model computer-controlled (EST) applications dramatically improve high-rpm performance. When used with their Flame-Thrower remote-mounted coil, voltage to the spark plugs is increased by more than 40 percent. These distributors are a direct bolt-in for most 1987-93 GM cars and 1987-95 trucks. Additional features and specifications include: * Housing is cast and machined from strong but light A384 alloy * Ignition modules are laser-trimmed for precise peak current control and use thick film technology for greater accuracy and improved reliability * High dielectric strength cap and rotor with solid brass terminals to prevent high-rpm arcing * Centerless-ground, corrosion-resistant shaft reduces friction and provides concentric operation * High-quality bronze sintered bushings are installed, aligned, and bored for accuracy and extended mileage use * A hardened steel distributor gear is machined to exact tolerances for a tighter mesh with the cam gear, eliminating horsepower losses caused by timing fluctuations found with excessive clearance and wear * Legal in all 50 states and Canada (CARB E.O. #D-57-13)
( 19 )
$285.95
$257.36
On Sale
Looking for a good cap and rotor for your HEI distributor? These Pertronix caps and rotors are made from a high-dielectric, 60 kV-rated alkyd molding compound to minimize crossfire and "arc-thru." They include nylon rotor hold-down screws, a low-resistance coil brush for a more efficient spark, and brass terminals for a long life.
( 9 )
$42.95
—
$43.45
$38.66
—
$39.10
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 137 )
$68.95
—
$74.95
$62.06
—
$67.46
On Sale
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 115 )
$67.45
—
$84.95
$60.70
—
$76.46
On Sale
Flame-Thrower Race HEI distributors from PerTronix produce 42 percent more energy in the coil, with 46 percent faster spark breakdown time. This allows 48 percent more peak current to reach the spark plug, compared to their Street/Strip HEI distributors. That's an enormous improvement over stock HEIs and most aftermarket HEI distributors. A specially designed vacuum lockout mechanism prevents timing adjustments that change rotor phasing, adversely affecting the burn time and efficient fuel combustion. The rotor plates are TIG-welded to the mechanical advance mechanism, preventing high-rpm distortion and improving mechanical reliability. Each distributor uses a new aluminum housing cast and is machined from a strong, but lightweight A384 alloy. They're supplied with a high-dielectric strength cap with solid brass terminals, a balanced rotor, and a low-resistance center coil brush. Also included are nylon rotor hold-down screws and a factory-installed, high performance mechanical curve kit with precision-machined weights and a center plate. A hardened, machined steel gear is standard, along with an electronic module and coil combination that excels in the 6,000 to 8,500 rpm range. These distributors are great for both Circle Track and drag race applications where factory-type HEI distributors are mandated.
( 9 )
$390.95
—
$413.45
$351.86
—
$372.10
On Sale
PerTronix Flame-Thrower Street/Strip HEI distributors with HEI III modules reduce misfires and improve engine performance. These powerful energy sparkers feature a specially designed module—the HEI III—that delivers multiple sparks and adaptive dwell that maintains peak energy through the entire RPM range. Flame-Thrower Street/Strip distributors have a factory-installed performance advance curve and an adjustable vacuum advance. They offer operation without misfire beyond 7,500 rpm—nearly 3,000 rpm higher than most stock HEI distributors. Order the model recommended for your application. Additional features: * Integrated digital rev limiter with LED feedback for precise RPM setting * Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability * Adjusts spark timing at higher RPM to compensate for the inherent electronic delay * Senses startup and increases energy for quicker, easier starting
( 6 )
$345.45
—
$360.95
$310.90
—
$324.86
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
Not Yet Reviewed
$176.95
$132.75
On Sale
PerTronix Flame-Thrower magnetic trigger billet distributors are perfect alternatives to the more expensive distributors that competitors offer. These distributors feature a precision magnetic pickup coil and reluctor for extremely accurate signaling at low and high rpm. An over-molded magnetic pickup coil supports windings, while providing excellent resistance to corrosion. Tyco Mate-N-Lok connectors work with most ignition system harnesses. A specially engineered reluctor made from lightweight FC-0208 alloy offers superior dimensional stability for symmetrical spark separation. PerTronix Flame-Thrower magnetic trigger billet distributors are compatible with most capacitive discharge ignition boxes.
( 12 )
$300.45
—
$422.95
$270.40
—
$380.66
On Sale
Experts agree that HEI ignition performance relies on a quality module and coil. Pertronix believes the combination of a great module and a great coil makes their Flame-Thrower HEI distributors the best. They've engineered the module and coil to work together to provide you with superior ignition performance on the street or track. Compare the Flame-Thrower high performance module and coil to an original GM HEI distributor and you'll find these improvements: * Operates without misfires up to a minimum of 7,500 rpm, nearly 3,000 rpm higher than most enthusiasts report with their original HEI * Produces 67 percent more energy in the coil * Spark breakdown time (the amount of time until the spark plug has enough voltage to spark) is 45 percent faster, resulting in more accurate timing throughout the rpm range * Delivers twice the energy across the spark gap (during a one-millisecond burn time) * Spark duration and more energy to the spark allow wider plug gaps (.050 in.-.055 in.), increasing flame kernel growth These are dramatic improvements, not just because of a great module and coil, but also because they've been designed to work as a team to produce these results. Models and options are available for applications from the 1950s and up.
( 20 )
$345.45
$310.90
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 145 )
$212.95
—
$235.95
$159.75
—
$176.95
On Sale
PerTronix adjustable vacuum advance canisters allow you to optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Replacement models are available for different distributor applications, such as GM HEI-type or billet models from PerTronix.
( 22 )
$31.65
$28.48
On Sale
When it's time for a tune-up, PerTronix offers quality distributor caps to replace your worn-out original. Why take chances with old, questionable, or faulty ignition components that can leave you stranded. PerTronix distributor caps are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to PerTronix; order the model and options best suited for your vehicle.
( 31 )
$37.85
—
$38.35
$34.06
—
$34.52
On Sale
Some PerTronix Ignitor and Ignitor II kits are provided with a rotor to ensure proper magnet sleeve engagement. PerTronix replacement distributor rotors, as well as other parts and accessories, offer unmatched quality to accommodate the performance levels your distributor was engineered for. These rotors are available for a variety of distributor applications found in vehicles from the 1950s and up.
( 14 )
$11.15
—
$18.85
$10.04
—
$16.96
On Sale
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 80 )
$79.79
$59.84
On Sale
ACCEL HEI in-cap Super Coils provide more high-rpm power and overall performance. Compatible with both original and computer-controlled HEI ignition systems, ACCEL HEI in-cap Super Coils are designed to resist shock and vibration. They have a finned cover that aids cooling, and hardware is included.
( 39 )
$100.95
$75.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
