Availability
Showing In Stock Items. Show All 132 Items.
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$50.99
—
$77.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$52.99
—
$106.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$73.99
FAST PS40 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high-rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 4 )
$67.95
Standard Motor Products offers these fuel pump cut-off switches for a variety of applications. These switches allow you to easily shut off your fuel pump with the push of a button.
( 10 )
$75.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$54.99
—
$58.99
Summit oxygen sensors will keep your engine running reliably by properly monitoring the amount of oxygen in your exhaust stream. Our sensors are manufactured to the highest quality standards.
( 1 )
$85.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$54.99
—
$107.99
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$90.99
—
$93.99
Cardone new mass airflow sensors meet or exceed OE specifications. These new MAFs are built with Cardone engineered technology. They precisely track OE output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation. And every component is rated to handle a broad range of temperatures and altitudes. Select new parts that offer quality and value--choose Cardone new mass airflow sensors.
( 5 )
$100.99
—
$107.99
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 81 )
$90.99
Ride height sensors can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. By replacing faulty sensors, you can prevent further damage to your vehicle's air suspension system. Arnott suspension ride height sensors are manufactured from quality components to restore the vehicle's ability to respond to road conditions, and increase comfort and dynamic capability for a premium ride. Their aftermarket ride height sensors level your vehicle by measuring the varying distances between the road and the vehicles chassis. The sensors provide your vehicle's Electronic Control Unit (ECU) with the information and send a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Choose the sensor designed for your vehicle.
Not Yet Reviewed
$64.88
—
$93.66
Dorman exhaust gas temperature sensors make replacing seized or damaged sensors a breeze. These EGT sensors are direct replacements and come with a bung repair kit just in case the bung is damaged during removal. This is a cost effective fix, instead of having to replace the entire exhaust pipe. They feature quality engineering and are backed by decades of automotive experience.
Not Yet Reviewed
$60.99
—
$98.99
Clearance
Hitachi offers voltage regulators for a wide range of vehicles, particularly many import cars and trucks. These stock replacements are built to OEM specifications for performance and longevity. The voltage regulator rapidly switches the alternator in and out of the charging circuit to provide your car with the correct voltage. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the voltage regulator model recommended for your application.
Not Yet Reviewed
$56.99
—
$70.99
Beck/Arnley ABS speed sensors supply information regarding wheel speed to the ABS computer. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, then the computer modulates the anti-lock feature until the speeds are equal again.
Not Yet Reviewed
$51.99
—
$68.99
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$52.99
—
$103.99
PowerStop has a reputation for precision and adherence to the strictest OEM standards. Extending those standards, PowerStop's electronic brake wear sensors are designed to meet the same form, fit, and function as the original OEM part. Brake wear sensors wear down with the pads and illuminate the brake pad wear indicator light/warning. When that happens, it's time to replace the brake pads as well as the sensors. PowerStop electronic brake wear sensors are designed to withstand high-temperatures, assure excellent electrode conductivity, and they will continue to work after thousands of miles, providing the safety and performance drivers count on.
( 5 )
$66.66
—
$98.75
Is your check engine light on? Is your vehicle hesitating, or even stalling? You may need of a new mass airflow sensor. Bosch mass airflow sensors were developed to replace your OEM components. They're manufactured to strict standards and made of high-quality materials.
( 2 )
$93.99
—
$107.99
TYC starters adhere to OE specifications, making their fit, form, and function that of the originals they are replacing. They are made with 100 percent all-new parts inside and out to ensure long-term use. TYC starters are put through rigorous and accelerated cycling tests to ensure product service quality and durability. Their comprehensive line of starters covers a wide range of vehicles. Choose the one designed for your vehicle.
( 1 )
$99.99
Re-engineered to address failure points in the original materials and design, Dorman headlight level sensors are designed with thicker materials to eliminate water intrusion. Also as an added feature, this new design allows replacement of just the failed sensor, without the expense and hassle of installing a complete headlight leveling sensor assembly.
Not Yet Reviewed
$76.95
Keep track of your vehicle's oil level with these replacement Standard Motor engine oil level sensors. They are made to meet or exceed OEM specifications and are available for a variety of applications.
( 1 )
$98.99
Dorman crankshaft position sensors are direct-fit replacements that are easy to install and offer long, reliable service. They are constructed from high-quality plastic with metal-reinforced mounting points to protect against failure. Dorman sensors accurately measure crankshaft location to detect misfires and control engine timing. They are manufactured to strict engineering quality standards and are available for a wide variety of applications.
( 2 )
$53.95
—
$53.99
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 2 )
$56.70
If you're suspecting a faulty MAP sensor, Beck/Arnley has your answer--these direct replacement MAP sensors! Keeping your ECU updated with the manifold absolute pressure is critical to efficient fuel economy. Faulty sensors sending out the wrong signals can lead to poor overall engine performance and disrupt fuel consumption. Beck/Arnley MAP sensors are fast, easy replacements that require no modifications and are the perfect replacement.
( 1 )
$55.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
