Availability
Showing In Stock Items. Show All 12 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1970 )
$140.95
—
$184.95
$126.85
—
$166.45
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$125.15
—
$286.95
$112.64
—
$258.26
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$179.30
—
$192.55
$161.37
—
$173.30
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
—
$223.85
$190.94
—
$201.46
On Sale
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
$160.15
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$176.10
—
$190.40
$158.49
—
$171.36
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$223.85
$201.46
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 803 )
$114.95
$103.45
On Sale
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$112.95
$101.66
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$112.95
$101.65
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
