Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
ACURA TL Sensors
Showing In Stock Items. Show All 95 Items.
NTK Oxygen Sensors
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$113.99
Denso Oxygen Sensors
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 99 )
$33.99
—
$105.99
Dorman Accelerator Pedal Position Sensors
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$112.99
Denso Air/Fuel Ratio Sensors
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 24 )
$97.99
—
$120.99
Bosch Premium Universal Type Oxygen Sensors
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$63.99
Bosch Premium Original Equipment-Type Oxygen Sensors
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 176 )
$54.99
JET Powr-Flo Mass Airflow Sensors
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 247 )
$209.99
Beck/Arnley Crankshaft Position Sensors
Has your vehicle ever mysteriously died on you, only to start up fine after emergency road service showed up--and then it happens again? Could be caused by malfunctioning crankshaft position sensors. Beck/Arnley sensors help to control many functions on your car, from ignition timing to power output to fuel efficiency, by relating crucial data to your vehicle's ECU. If your crankshaft position sensors become burnt or worn out, solve the "mystery" with new sensors from Beck/Arnley, for a life made easier by parts made right.
( 3 )
$116.99
Denso Crankshaft Positioning Sensors
Denso crankshaft positioning sensors detect crankshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso crankshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the crankshaft--a design almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$47.99
Clearance
Beck/Arnley Engine Coolant Temperature Sensors
Having difficulty starting in cold weather? We're referring to your car, not you. Or, maybe you're seeing readings of overheating when all is normal. If your engine is giving questionable temperature readings or having trouble starting or running, you may need a new Beck/Arnley engine coolant temperature sensor. These quality-made sensors will signal your car's computer with the correct operating temperature to get the right amount of air and fuel flowing. Replace corroded sensors with Beck/Arnley engine coolant temperature sensors.
( 2 )
$12.99
—
$25.99
Holstein Parts MAP Sensors
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
( 1 )
$32.99
—
$40.99
Summit Bucks
Delphi Engine Coolant Temperature Sensors
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$24.99
—
$30.99
Summit Bucks
Delphi Mass Airflow Sensors
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 104 )
$99.99
—
$107.99
Beck/Arnley MAP Sensors
If you're suspecting a faulty MAP sensor, Beck/Arnley has your answer--these direct replacement MAP sensors! Keeping your ECU updated with the manifold absolute pressure is critical to efficient fuel economy. Faulty sensors sending out the wrong signals can lead to poor overall engine performance and disrupt fuel consumption. Beck/Arnley MAP sensors are fast, easy replacements that require no modifications and are the perfect replacement.
( 1 )
$46.99
—
$83.99
Summit Bucks
Delphi Camshaft Position Sensors
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 14 )
$42.99
—
$82.99
Clearance
Holstein Parts Vehicle Speed Sensors
Vehicle speed sensors measure wheel speeds and provide this information to the vehicles ECU (Electronic Control Unit). The ECU then calculates ignition timing, transmission shift points, and air/fuel ratios for the vehicle. Data from the Vehicle Speed Sensor is also used in cruise control systems to maintain a constant speed. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts vehicle speed sensors line has superior coverage for domestic and import applications.
( 4 )
$21.99
—
$80.99
Holstein Parts ABS Sensors
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 4 )
$20.99
—
$156.99
Denso Camshaft Positioning Sensors
Denso camshaft positioning sensors detect camshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso camshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the camshaft--this design is almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$64.99
—
$69.99
Clearance
Beck/Arnley Replacement Knock Sensors
Knock, knock... who's there? If it's your engine talking, you'd better listen! Beck/Arnley knock sensors are quality-made replacement parts that fit just like the originals. If you hear an unusual pinging in your car, especially at high speeds, then you may need to replace your knock sensor. Engine knock isn't a joke! Protect your engine and its components with replacement knock sensors from Beck/Arnley.
( 1 )
$90.99
$32.99
—
$57.50
Summit Bucks
Clearance
Delphi Oxygen Sensors
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$56.99
$41.50
—
$230.99
Clearance
Holstein Parts Crankshaft Sensors
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 2 )
$57.99
$17.50
—
$40.50
Clearance
Standard Motor Oxygen Sensors
Standard Motor Products oxygen sensors are manufactured to OEM specifications for quality, durability, and proper fit. These oxygen sensors are designed to keep your engine from running too rich or too lean for optimum performance.
Not Yet Reviewed
$34.99
$25.50
ATP Automatic Transmission Speed Sensors
Did you know that your vehicle's performance and mileage can be greatly affected by a malfunctioning vehicle speed sensor?ATP automatic transmission speed sensors replace your worn or malfunctioning sensors and will provide your engine with the proper information that it needs to run its best.
Not Yet Reviewed
$42.99
—
$46.99
Holstein Parts Coolant Temperature Sensors
The coolant temperature sensor, also known as the coolant temperature switch, is an engine management system sensor used to monitor the engine coolant's temperature. Because temperature play a vital role in engine performance, a problem with your coolant sensor could quickly translate into engine issues. Holstein Parts coolant temperature sensors contain only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. And they offer superior coverage for domestic and import applications.
Not Yet Reviewed
$9.99
—
$11.99
