Availability
Summit Racing™ offers OEM GM flex fuel sensors for a wide range of applications, including many Chevrolet, GMC, Buick, and Cadillac models from 2011 and up. These replacement sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. The sensors are made from factory materials and specs to ensure proper fit and performance. Ensure the fuel system efficiency you expect; order the model recommended for your vehicle.
Not Yet Reviewed
$79.99
Summit Racing™ GM flex fuel sensor harnesses are assembled with OEM tooling, OEM Delphi (connector, lock, seals, and terminals), and use OEM harness wire colors. They're compatible with 2012 and newer GM LS Series engines.
Not Yet Reviewed
$10.99
When it's time to replace worn-out connections or increase the voltage to your fuel pump, Summit Racing™ fuel pump wiring kits are ready to enhance performance. Factory wiring harnesses are not designed to power high-flow fuel pumps—so our replacements ensure your pump gets the voltage it requires. Summit Racing™ kits come complete with everything you need to wire your fuel pump for increased output.
( 2 )
$76.99
Summit Racing™ Pro LS ignition coil covers are a great way to dress up your LS engine. These aluminum coil cover sets have a durable powdercoat finish with an etched Summit Racing™ logo to stylishly hide LS engine coil packs. The covers fit GM LS engines utilizing existing coil bracket mounting points and have an oil fill hole to accommodate the oil fill tube. These covers will not clear factory high-mount alternators, like those found on Corvettes, unless a cutout is fabricated or aftermarket alternator and brackets are used.
( 3 )
$330.99
Summit Racing™ finned aluminum ignition coil covers offer a nostalgic look for your ride's engine compartment. Not only are they great looking, but they also have some worthwhile features—such as models that fit round canisters and those that fit square TFI-style coils, plus a variety of available finishes. Summit Racing™ finned aluminum ignition coil covers look great on their own or when complemented with other finned covers under your hood!
Not Yet Reviewed
$44.99
—
$91.99
Summit Racing™ fuel pump relays will protect your electrical system from frying under the high amp draw of your electric fuel pump. Each relay includes a 30 amp circuit breaker and relay, terminal ends, and all necessary wiring.
( 148 )
$31.99
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 48 )
$13.99
—
$1,505.99
Summit Racing™ Direct-Fit AutoFuse Restoration Series dash harnesses and accessory kits allow you to maintain the plug-and-play functionality of the original factory-type harnesses while converting the entire fuse block from glass fuses to an updated and modern AutoFuse Series ATO-type fuse block. Our new kits offer restorers the flexibility to add additional power circuits, without the installation problems normally associated with this type of fuse box update. No cutting, modifying, or altering is required just plug it in and turn it on. Compatible with all original or remaining harnesses in the car. Choose the desired kit designed for your vehicle.
( 1 )
$394.99
—
$714.99
Finish the swap from fuel injection to a carburetor and distributor using a Summit Racing™ LS front drive distributor timing cover conversion kit. Our front cover and gear assemblies allow you to run your LS-style engine in classes that require a distributor ignition system, while relishing the simplicity and tuneability of a distributor and carburetor. Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits: * Aluminum timing chain cover * Distributor drive gear assembly * Fuel pump eccentric * Color-coded spacers * Front cover crankshaft seal * Adjustable timing pointer * Necessary hardware
Not Yet Reviewed
$448.99
Clearance
Mopar and Hemi mean a lot to car guys--they embody power and classic design. Summit Racing™ Mopar Hemi coil-on-plug ignition coils are a great way to match well-engineered engines with the pure power of plasma. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind to provide 20 percent more voltage and 30 percent more spark energy (mj) over stock. All this comes from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you are running a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn!
( 14 )
$59.99
—
$479.92
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 62 )
$18.99
—
$320.92
Summit Racing Equipment® universal relays let your take a load off! These relays are available for a variety of applications, including electric fans, shaved door handles, 12 volt horns, electric fuel pumps, or whatever you need them for! Summit Racing Equipment® universal relays let you keep all of your wiring organized and easy to understand.
( 10 )
$9.99
How important are ignition coils to the performance of your vehicle? Well, without them your spark plugs would never receive the high voltage needed to ignite the fuel and air mixture. Securing them is also important—and that's the function of the Summit Racing™ billet aluminum ignition coil brackets. Summit Racing™ billet aluminum ignition coil brackets offer easy mounting for your ignition coil.
Not Yet Reviewed
$35.99
—
$43.99
Summit Racing™ Our Direct Fit Chevrolet and GMC Truck Reproduction Battery Cables are Made In The USA using the original GM specifications to insure a perfect fit. All of our battery cables are upgraded with High Performance Cross-Linked Polyethylene type insulation rated at 125C and are nearly impervious to oils, fuels, chemicals and typical engine temperatures unlike the PVC insulation type cables used during production. They are guaranteed to fit and outlast your OEM battery cables. They include any factory installed convoluted conduits, looms, insulating sleeves, mounting clamps, correct size side post bolt hex head on the battery terminals and appropriate angled ring terminals for that perfect routing and fit. Our battery cables are not service type assemblies designed to replace the factory installed cables. They are built to match the original cables GM installed when the trucks were new. The molded-on insulator on the side-post battery terminal end of the cables are molded in Red for positive and Black for negatives to original GM standards using upgraded Thermoplastic Elastomer components instead of PVC for long life. Truly the finest battery cables available.
( 8 )
$43.99
—
$168.99
These easy-to-install oxygen sensors will accurately send data to your Summit Racing™ digital air/fuel ratio gauge. The highest quality components are used to ensure an accurate, dependable reading.
( 2 )
$34.99
Summit Racing™ Direct-Fit AutoFuse Restoration Series front fuse block kits are 28-piece accessory connector and terminal kits that include 13 terminals for 14- through 18-gauge cable, 1 terminal for 10- and 12-gauge cable, and 14 colored indexed connectors that are designed to plug into specific cavities on your Direct-Fit AutoFuse Series dash harnesses accessory ports located in the front of the fuse block. These connections allow the enthusiast to design specific indexed power cavities for accessories without fear of plugging into the wrong cavities, such as electric fuel pump energized with ignition run only. Examples of circuits available on your Direct Fit AutoFuse Series Restoration wiring: * Accessory Fused circuit for devices requiring power in ignition switch position accessory and ignition run combined * Accessory Un-Fused circuit for devices requiring power in ignition switch position accessory and ignition run combined * Ignition Fused Run circuit for devices requiring power in ignition switch run position only * Ignition Un-Fused Run circuit for devices requiring power in ignition switch run position only * Constant Battery Power Fused circuit for devices requiring constant battery power regardless of ignition switch position * Constant Battery Power Un-Fused circuit for devices requiring constant battery power regardless of ignition switch position * Instrument Cluster Lighting on the rheostat side of the headlamp switch when activated
Not Yet Reviewed
$38.99
These Summit Racing™ GM HEI ignition tune-up kits offer an affordable way to bring your stock GM HEI distributor back to life. They include the following components: * High-power 50,000 V HEI coil * Distributor cap and rotor * Coil dust cover * Low-saturation ignition control module * Adjustable vacuum advance unit * HEI bushing (between the coil and cap) * Wiring harness and capacitor * High performance advance spring and weight set * Mounting hardware
( 164 )
$81.99
—
$83.99
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 3 )
$299.99
—
$499.99
On Sale
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 23 )
$277.99
$250.19
—
$348.99
Summit Racing Equipment® offers wiring harnesses for a wide range of vehicles—including many Chevrolet, Pontiac, Oldsmobile, and American Motors models from the 1960s and '70s. The factory-style replacement harnesses are ideal for restoration and upgrade projects. They are available to connect and power up a variety of dashboard and accessory functions. Order the wiring harness recommended for your application.
( 2 )
$472.99
—
$487.99
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1224 )
$319.99
Protect your investment with a Summit Racing™ ballast resistor. They are made to OEM specifications, ensuring years of trouble-free performance. Replace the often missing or incorrect ohm ballast resistor in your car with one from Summit Racing™. Please see applications to ensure the correct ballast for your application.
Not Yet Reviewed
$13.99
Our Summit Racing™ computer-controlled billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance.
( 93 )
$246.99
—
$255.99
Optimize your engine for the best performance and operation with our Summit Racing™ Megasquirt Engine Management Combos. These combo kits provide you with the flexibility to precisely tune your engine—which will make a noticeable difference in its attitude from startup to wide-open throttle!
( 1 )
$1,098.97
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
