Availability
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1002 )
$112.95
—
$573.95
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$151.70
—
$592.00
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$135.25
—
$272.10
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
—
$280.10
PerTronix Flame-Thrower tuneup kits not only make your tired stock HEI distributor young again, they make it better than it was before. The upgrade kits include many of the same components that make up PerTronix's powerful Flame-Thrower distributor: A 50,000 V coil and module; an alkyd cap and rotor; an adjustable vacuum advance canister; a high-performance advance kit; a wiring harness; a capacitor; and hardware. Order the model recommended for your year/make and engine application.
( 50 )
$179.30
—
$214.80
These PerTronix billet distributor advance spring kits are designed to adjust the mechanical advance curve. They include three sets of springs to help you get the correct setting. The spring kits are designed to fit PerTronix Flame-Thrower billet distributors.
( 17 )
$22.80
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$161.75
—
$239.25
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$17.25
—
$67.35
Looking for a good cap and rotor for your HEI distributor? These Pertronix caps and rotors are made from a high-dielectric, 60 kV-rated alkyd molding compound to minimize crossfire and "arc-thru." They include nylon rotor hold-down screws, a low-resistance coil brush for a more efficient spark, and brass terminals for a long life.
( 11 )
$45.60
—
$46.15
PerTronix performance advance curve kits feature precision-machined chromoly weights and center plates that eliminate erratic timing. Three sets of springs, guide bushings, and complete installation instructions make re-curving your distributor easy!
( 3 )
$28.60
PerTronix Flame-Thrower ignition system bundles offer improved performance with more horsepower and better throttle response. Plus, they include everything you need in one box at a great price. Each of these bundles includes: a Flame-Thrower billet plug-and-play distributor with Ignitor II or Ignitor III module technology; a matching low-resistance Flame-Thrower chrome coil; and a set of Flame-Thrower 8mm MAGx2 universal wires (featuring silicone jackets) to resist high temperatures. PerTronix Flame-Thrower ignition system bundles typically offer a choice of red or black cap, and they're available for the most popular Chevrolet and Ford engines, as well as Chevy marine engines.
( 6 )
$496.50
—
$574.50
PerTronix Digital HP ignition system bundles make matching up the proper components for your application a snap. And you get everything you need at a value-added bundled price. Each of these bundles will include a PerTronix Digital HP ignition box, an HP 50,000 V coil, and a plug-and-play billet magnetic trigger distributor. PerTronix Digital HP bundles are available for the most popular Chevrolet and Ford engines, with black caps and your choice of black or silver anodized boxes. Choose the PerTronix Digital HP Ignition System Bundles design best suited for your application.
Not Yet Reviewed
$719.35
—
$784.60
PerTronix adjustable vacuum advance canisters allow you to optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Replacement models are available for different distributor applications, such as GM HEI-type or billet models from PerTronix.
( 23 )
$33.60
—
$34.15
These PerTronix vacuum canisters are direct replacements for your Flame-Thrower billet plug and play distributors. You can count on PerTronix to get the best performance out of your ride!
( 12 )
$34.15
—
$40.20
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$106.05
PerTronix vacuum advance lockouts are designed to eliminate the vacuum advance and remove the vacuum advance chamber from PerTronix distributors. Made of steel, they're available for both clockwise and counterclockwise rotation distributors. Installation is simple; no other modifications are required.
( 3 )
$20.00
PerTronix terminal kits include high-quality electrical connectors to help complete each circuit securely. Available for different applications, each terminal kit provides you with a variety of different components to make sure each electrical job is finished with the correct connection. Order the PerTronix terminal kit that is best suited to fit your specific project needs.
( 1 )
$34.15
—
$64.05
PerTronix's primary ignition wire extension kits can be used to increase the wire length of its electronic point conversion kits or distributors. Each kit features 39 in. of 20-gauge ultra-flexible silicone jacketed red and black wire (rated at 300 degrees F), ring terminals, quick-disconnect insulated male and female terminals, and shrink tubing. All necessary hardware is included for simple installation.
( 2 )
$14.10
PerTronix Ignitor® and Ignitor II® external coil conversion kits make it easy to setup your ignition system with an external coil. These distributor replacement kits include components designed specifically for use with Ignitor® and Ignitor II® modules.
( 1 )
$145.85
PerTronix Weatherpack connector kits are the ultimate way to secure your electrical connections for long-life and dependability. Features and benefits include: * Weatherproof housing made of nylon plastic for impact resistance * Connector has lock mechanism that align terminal and seal * Positive snap lock action with secondary locking for terminal retention * Indexed to prevent miss matching * Temperature rated at -40 degrees to 248 degrees F * Terminals are brass, and tin treated * Silicone seals in green and blue for different gauge wire
( 2 )
$73.20
PerTronix dual wall heat shrink tube kits contain waterproof sleeves in a variety of lengths, diameters, and colors. Their adhesive-lined inner wall seals and protects against moisture and corrosion. The polyolefin tubing is easy to shrink with a heat gun. Add a layer of insulation and protection for your wiring connections and other components. Additional product details: * Temperature rated at -49 degrees to 257 degrees F * Shrink temperature: Start at 158 degrees F; completely shrunk at 248 degrees F * Shrink ratio 3:1 * Max electrical rating: 600 V
Not Yet Reviewed
$33.60
With their adjustable start retard, Digital HP boxes are ideal for street cruisers up through hard-starting, high-compression race engines. Don't let their size fool you; PerTronix Digital HP ignition boxes hold 30 percent more energy than competitors and are built for the long run. Additional Features: * Multiple spark all the way to redline * RPM activated trigger * Locking Molex connector * Tachometer output lead * Onboard diagnostics and tach calibration
( 44 )
$318.25
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$106.05
—
$179.30
PerTronix power relays enable maximum ignition performance! Adding or upgrading to Ignitor electronic ignition systems requires a full +12 V power connection, which means bypassing the OE resistance wire. So, where is it? Buried! Having PerTronix power relays means that you won't have to dig through the wiring harness and replace wires any longer. These universal-designed relays work with most battery ignition systems, and they're compact, so your engine bay will look the same. They'll minimize conducted voltage spikes by isolating the ignition power source from other high-current equipment. They'll also provide consistent full-battery voltage and eliminate problems from worn-out and corroded ignition switches, connectors, and wires. Get the most from your Ignitor ignition systems with easy-to-install power relays.
( 27 )
$49.30
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
