Availability
On Sale
MSD Atomic EFI TBI fuel pressure sensor kits are replacement support components designed to maintain your throttle body's performance. Atomic EFI systems by MSD were designed with two goals—to simplify EFI and improve overall performance. Simplicity is achieved through less wiring and fewer connections, and readily available replacement components such as these Atomic EFI TBI fuel pressure sensors. These support component kits include senor and O-rings to make it easy to uphold optimum performance.
Not Yet Reviewed
$87.15
$47.93
MSD relay and wiring kits protect your electrical system and provide reliable and consistent power for your high performance electric fan, electric water pump, or electric fuel pump. These kits include high-quality, heavy-gauge wiring, 30 amp relay, 30 amp circuit breaker, pre-wired relay connector, crimp terminals, and hardware. Each kit comes with easy to follow instructions that are specifically for that application.
( 2 )
$44.76
MSD solid state relays clean up your wiring. These modules take the place of four standard relays and eliminate unsightly wiring. Four independent channels can be activated using either power or ground, and each channel is capable of handling up to 20 amps of continuous current—providing up to 80 amps of power. MSD solid state relays provide a compact and clean design to make your wiring project a breeze.
( 23 )
$58.15
MSD coolant temperature sensors produce a variable resistance from -40 degrees F to 302 degrees F. They thread into a 3/8 in. NPT female hole and include a matching 2-pin Weatherpack connector for a reliable positive lock connection.
( 2 )
$13.66
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$549.95
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 287 )
$217.95
—
$249.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 619 )
$732.95
$44.27
—
$749.95
MSD engineers drew upon their experience with Top Fuel cars and created these new HVC-2 coils for use with the MSD 6 Series Ignition Controls. These coils utilize an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 and wound specifically to create an effective coil with incredible voltage capabilities, lightning quick rise time, and lengthy spark duration. The housing, also molded from Rynite material, features far-spaced brass primary terminals and a well-protected secondary tower for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts. They're designed for use with MSD 6 Series ignitions.
( 52 )
$349.95
MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.
( 16 )
$699.95
—
$799.95
MSD relay modules are designed to be easily installed in most automotive electrical systems where a high amperage relay is needed. These relay modules are perfect use with high amperage electric fuel pumps and high CFM electric cooling fans. The relay housing comes with a labeled lid that snaps into place providing a clean installation and protecting the main power stud and triggers from contamination or accidental contact. MSD offers these relay modules with different channel outputs, select the model that's designed to meet your application needs. Features include: * 7 V to 20 V supply to fit a wide variety of applications * Independent 40A outputs, to supply power to most aftermarket fuel pumps and electric fans * Configurable single-wire activation with Ground (-) input or 12 V (+) input, with removal of the Tie-Bar * Removable cover for easy accessibility * Low-profile JCASE fuses provide ample protection in case of a short * LED status indicators, show you which channel is triggered at a glance
( 12 )
$57.49
—
$158.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components--especially when they improve performance like these MSD direct replacement ignition coil packs. They are designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and improved midrange rpm power.
( 60 )
$474.95
$31.82
—
$461.95
MSD Power Grid wide band oxygen sensor modules provide valuable air/fuel ratio data to your MSD Power Grid, data logger, or air/fuel ratio gauge. These modules feature: * Plug-and-play with MSD Power Grid * Easy set-up; no free-air calibration required * Completely sealed unit for durability in race environments * Bosch 4.9 oxygen sensor * 0 to 5 V output to run an air/fuel gauge or data logger * Dual-color LED provides on board diagnostics * Multiple modules can be used on a single Power Grid * Data logs air/fuel ratio and heater voltage * Fuel calibration options for gasoline, methanol, ethanol, E85, propane, and diesel * Custom fuel calibration option can be programmed by user
( 2 )
$334.95
On Sale
MSD 6EFI ignitions are capacitive discharge ignitions designed to work in harmony with electronic fuel injection systems. They come with detailed wiring instructions, making installation a breeze. Increased throttle response, smoother idle, quicker starts, and full ignition power throughout the entire rpm range are all benefits of adding these ignition controls to your fuel injected engine. They feature built-in rev limiters that will protect the engine in the event of a missed shift or driveline failure. If you have a 4, 6, or 8-cylinder engine with EFI, MSD 6EFI ignition controls will connect and fire it up! MSD 6EFI ignitions feature: * Detailed instructions for installation with various EFI systems * Compact design * Adjustable rev limiter for over-rev protection with rotary dials in 100 rpm increments * Works on 12 V electrical systems using a distributor * Easily connects to magnetic pickup, electronic, and even points distributors
( 10 )
$229.99
$206.99
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$579.95
$302.95
—
$579.95
MSD Digital 6 off-road ignition controllers deliver a fully potted design that provides the ruggedness and reliability needed to get your 4WD to any destination. These units multi-spark below 3,000 rpm on V8s—ensuring clean, crisp throttle response and complete fuel burn when crawling at low speeds. Above 3,000 rpm, a powerful capacitive discharge spark keeps the fire lit until you let off the skinny pedal. The smooth, accurate rev-limiter will protect your engine from over-rev damage due to drivetrain failure or a slick spot on the trail. Whether you're crawling rocks, high-speed desert racing, or playing in any kind of harsh terrain, your off-road rig can benefit from an MSD Digital 6 off-road ignition controller. Features include: * MSD's smoothest rev limiter yet! Easy on your engine * Fully potted design provides reliability even in high-vibration and wet circumstances * Large, easy-to-read LED display * Simple setup of features, such as the rev limiter, with three rotary dials on the face of the unit * Built-in Start Retard adjustable in 0, 10, or 20 degree increments for quick, easy starts and extended starter life * LED displays rev limit, highest RPM turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Rugged housing to stand up to demanding off-road and race conditions * Single plug-in connector for clean wiring * Works on 4, 6, and 8-cylinder engines * Reverse polarity and overheat protection provide ultimate reliability
( 7 )
$549.95
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$995.95
$92.59
—
$1,249.95
There are two ways to limit your rpms. The rough way simply cuts off ignition spark, which can cause backfiring, extreme engine roughness, and possible engine damage. The gentle way is with these MSD Soft Touch rev controllers. They use sophisticated computer circuitry to drop spark one cylinder at a time, until your engine is at or below its maximum rpm. Those cylinders are then fired on the next cycle, to prevent them from loading up with fuel. The result is smooth rev limiting action without all the rough stuff. There are two versions of the Soft Touch rev controllers--one for MSD's 6T, 6TN, 6HVC ignitions, and one for OEM electronic and points ignitions. Both come with 6,000, 7,000, and 8,000 rpm plug-in modules, and can be used with other modules or MSD's RPM module selector.
( 15 )
$249.95
—
$275.95
MSD Power Grid Dual NTK Wideband O2 modules are plug-and-play units that monitor and record the air/fuel ratio (AFR) of internal combustion engines. These dual channel air/fuel ratio systems are designed to seamlessly interface with MSD's Power Grid system controller (sold separately). They come with an extension harness, the sensors, connectors, and other parts necessary to accurately measure the AFR of vehicles running on gasoline and fuel containing alcohol. Features: * Plug-and-play Power Grid module * Works seamlessly with additional MSD Wideband oxygen sensor modules * No set up or calibration required (free air calibration is optional for added precision) * Can be expanded to operate with a second sensor * Fully potted and sealed unit with automotive-grade connectors * 0.5 to 4.5 V analog output voltage for a gauge or data acquisition * LEDs to monitor system operation and health * High-speed data acquisition (when used with the Power Grid controller) * Back pressure compensated AFR when used with optional exhaust pressure module (sold separately)
( 1 )
$799.95
If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a non-current limiting ignition (originally equipped with a ballast resistor) you will need one of these MSD factory ignition module tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.
( 17 )
$99.95
On Sale
MSD Ignition waterproof relay harnesses are ideal for use on electric fuel pumps, water pumps, cooling fans, off-road lights, and any other application that is exposed to muddy or wet conditions. Each is built with rugged connectors and pigtail harness with long leads and heavy-duty gauge wire. The connectors have wires molded in rubber and a gasket for a leak-proof seal. Features: * Waterproof relay with pigtail harness and sealed connector * Metal bracket for mounting underhood or just about any other location * Ideal for marine, dirt track cars, and off-road trucks and Jeeps * Works in normally open or normally closed circuits
( 10 )
$34.17
$22.21
MSD ignition coil pack wiring harnesses are designed to connect your ignition coil pack to your aftermarket or OEM ignition. They can be used on both carbureted and fuel injected engines, making them an excellent choice for any application.
( 24 )
$104.95
On Sale
MSD Ignition's Multiple Spark Coils (MSC) will fit in place of the stock GM LS coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy sparks, crowned with MSD's multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!
( 26 )
$149.95
—
$1,078.95
$112.46
—
$733.46
MSD 6EFI ignition coils produce high-spark energy to ensure the air and fuel in your engine get burned completely to improve starting, throttle response, and supply powerful spark throughout the RPM range. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance with logos laser-etched on a black anodized aluminum mounting bracket, and is supplied with four, self-tapping mounting screws, plus a plug-in harness with color-coded wires to facilitate an easy installation. When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you! In addition, an MSD spark plug wire boot and terminal come in the kit to convert your existing coil wire from a female socket connection, to male high energy ignition (H.E.I.) connection if needed.
( 2 )
$65.89
MSD sport compact coils are direct bolt-in replacements that intensify the spark output of your ignition, helping your air/fuel intake charge burn more completely. The results are smooth idle and improved mid-range power. Installation is a snap--the coils connect right to your factory wiring.
( 38 )
$125.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
