Availability
One of the challenges with a Gen III Hemi swap is alternator clearance. The Holley Gen III Hemi alternator with relocation kit is the solution. These kits come complete with everything you need to move the alternator to a more ideal location to provide additional clearance to the frame on the passenger side of the engine. The kits include the mounting bracket, pulley, alternator and hardware for installation. The alternator is smaller and more compact, further helping clearance issues, making them easy to wire. The steel relocation bracket is black powdercoated for extra rigidity and corrosion-resistance. Make your Gen III Hemi swap easy with one of these Holley kits.
Not Yet Reviewed
$749.95
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$449.95
—
$499.95
$403.95
—
$448.95
Holley Performance offers late model dual pump module relay kits for a variety of applications—including many Ford, Dodge, and Chrysler vehicles from 2005 and up. Each kit includes essential parts necessary to wire twin pump modules to a vehicle. The installation starts with two high-quality Hella 40 amp relays, as well as relay sockets with 10 ft. wire lengths, 12 gauge primary wires, 16 gauge secondary signal wires, and heat shrink sealing connectors to complete your install. Also included are two fuse holders and 30 amp fuses, one for each pump.
Not Yet Reviewed
$186.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$579.95
$302.95
—
$599.95
On Sale
Holley LS extended-length main engine harnesses are 22 in. longer than previous harnesses. Designed to fit most 24x and 58x LS engines from 1997-2012, they are a perfect fit for installers wanting to mount any Holley EFI ECU inside of the passenger compartment where it is away from the elements, and easy to access, such as on a roll bar or under the passenger seat. Notes: * Plug-and-play with Dominator, HP, Terminator X, and Terminator X Max ECUs * LS1/6 harness interfaces with 24x crank and 1x cam sensors * LS2/3/7 harness interfaces with 58x crank and 4x cam sensors
( 1 )
$672.95
$604.95
For an uncluttered, hassle-free LT engine swap, Holley EFI Terminator X drive-by-wire throttle body wiring harnesses are the solution. Designed for Gen V LTx throttle bodies and Terminator X and X Max ECUs, the harnesses are built with pre-terminated ends to make your install easier. Build your project to take advantage of DBW benefits with the help of Holley EFI's drive-by-wire throttle body wiring harnesses.
( 1 )
$283.95
On Sale
Holley's Terminator X and Terminator X Max ECUs give you complete control of your engine, self-learning fuel strategies, and the race-winning technology of Holley EFI at a budget-friendly price. When you need to service your system, Holley has the components that will fit and perform as expected. Holley Terminator X/X Max engine control module wiring harnesses allow you to access the inputs and outputs built into the Terminator X or Terminator X Max ECU. These harnesses have all eight pins populated, four inputs and four outputs. Features: * 36 in. flying leads * Pre-terminated at ECU connector * Eight wires * Sealed connector
( 2 )
$39.49
$35.54
The Hilborn EFI-R manifold systems combine electronic fuel injection with the racing-born performance and aggressive looks of individual runner engine induction. Holley Hilborn Universal Terminator X MPFI systems provide cutting edge EFI technology, and are intended for the most serious naturally aspirated performance enthusiast. Each kit includes a CAN-USB tuning dongle, so you can tune your EFI system specifically for your engine via Holley's free Terminator X EFI software. Also included is a universal main harness, EV1 injector harness, Bosch LSU 4.9 wideband, input/output harness, and main power harness. These kits are for use with Hilborn EFI-R intake manifolds: * 300-800 for Big Block Chevrolet applications requiring 2 7/16 in. throttle bores * 300-801 for Big Block Chevrolet applications requiring 2 5/8 in. throttle bores * 300-807 for Big Block Chevrolet applications requiring 3 in. throttle bores
Not Yet Reviewed
$1,249.95
On Sale
Holley EFI Dominator transmission harnesses provide control of your Tremec. The harnesses are terminated for VSS, reverse lockout, and reverse lights. Choose the one designed for your build.
( 1 )
$228.95
$206.05
On Sale
Terminator X standalone engine management systems offer performance at a budget price with plug-and-play operation. For use with these ECUs, Holley EFI Terminator X LT main engine harnesses are available to make connecting and servicing your system easier. Choose the one designed for your application.
Not Yet Reviewed
$574.95
$516.95
Holley's Terminator X and Terminator X Max give you complete control of your engine, self-learning fuel strategies, and the race-winning technology of Holley EFI at a budget-friendly price. To maintain the ultimate performance Holley also offers service parts. Holley Terminator X MAP sensor adapter sets are fittings for different vacuum hose diameters. They are identical to the ones supplied with all Terminator X or Terminator X Max EFI kits. The set includes 1/8 in., 3/16 in., and 1/4 in. hose barb adapters that will provide the same fit and function as the originals.
Not Yet Reviewed
$21.03
On Sale
If you don't feel comfortable cutting up your factory wiring or don't want to attempt to swap pins on your headlight plugs, Holley RetroBright adapters make it a plug-and-play affair. If the standard H4 male plug used on Holley RetroBright headlights will not fit your female socket or you need to swap pins around to match up properly, these harnesses will make the job quick and easy. Additional details: * Allows Holley RetroBright headlights to connect to any non-standard H4 sockets or those that require a pin swap * Eliminates the need to cut factory wiring * Can be used to replace old and brittle factory sockets * Includes two Holley RetroBright H4 adapters
( 1 )
$6.57
—
$11.33
$3.61
—
$6.23
Many Toyota vehicles will have a switched ground that doesn't allow Holley's RetroBright headlights to work right out of the box, however Holley has a solution--RetroBright ground switched harnesses. Each harness is designed to switch the ground back, then the headlights can be plugged into the harness, allowing you to enjoy the safety and beauty of RetroBright LED lighting. Installation is easy and effective as there is no special cutting or major reconfiguration of the factory wiring necessary.
Not Yet Reviewed
$27.93
On Sale
Holley offers RetroBright headlight wiring connectors in male or female configurations. These unterminated headlight connector are designed for use on any H4 or 9003 system where an extra connector is needed for an adapter harness for RetroBright headlights.
Not Yet Reviewed
$3.05
—
$3.51
$2.74
—
$3.16
On Sale
Getting a high-powered drag car to hook is the key to low elapsed times and win lights. Whether a small tire radial car or a full out Pro-Mod, all racecars will benefit from Holley's Time-Based Traction Management feature. Designed for Terminator X V3 Build 110 and later, the Time-Based Traction Management is intended for drag racing, standing mile events, or other racing that starts from a stop. Traction management is based on the time from launch vs. engine and driveshaft speed (one or both can be used). The tuner enters several curves that will retard ignition timing and can also enable rev limiting based on the departure of wheel or engine speed from the base curve. Each Holley EFI Terminator X Active Speed management software purchase allows activation of the traction management features for a single ECU. Once purchased, instructions will be emailed to the purchaser on how to access the feature. Please note that it may take up to an hour for the email to arrive after the order has been placed. Features: * Active Speed Management--traction control based on engine speed and/or driveshaft speed * Import Racepak driveshaft curve and rpm data directly into your ECU * Import crankshaft or driveshaft curves from previous pass, curve will automatically populate on the graph * Requires driveline speed sensor, be it wheel or driveshaft speed
Not Yet Reviewed
$574.95
$516.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
