Availability
For those running a Pro-Flo 4 or Pro-Flo 4 XT on your vehicle, Edelbrock now offers a replacement ECU. Edelbrock Pro-Flo 4 engine control units are a new service item for customers who need to replace a damaged original or would like to carry an additional ECU as a spare. Order the model designed for your fuel injection kit application.
( 3 )
$654.95
Edelbrock Pro-Flo 3 EFI fuel pressure sensors are top-quality replacements for use with the Pro-Flo 3 systems. Affordable and easy to install, these plastic/steel sensors have 1/8 in.-27 NPT threads and include a -6 AN fuel pressure take-off adapter fitting. The sensors help to ensure that your fuel pressure readings are accurate. No laptop is required for installation.
( 1 )
$92.95
Edelbrock Pro-Flo 4 ignition coils are designed for use with electronic ignitions and produce an impressive 45,000 volts of power. Edelbrock kept the standard cylinder shaped housing and even gave it a satin black finish, so it will look right at home under the hood of your hot rod. These coils are an ideal complement to Edelbrock Pro-Flo 4 EFI systems.
( 14 )
$52.95
Edelbrock Pro-Flo 4 fuel pump relay kits were created to handle the high current that your EFI system needs to get the fuel from the tank to the engine. These relay kits help prevent voltage drops to ensure your fuel pump gets full voltage from your vehicle's battery to provide consistent fuel pressure to the regulator. These Pro-Flo 4 fuel pump relay kits are designed to plug into a Pro Flo system and come terminated with a fuse already inline.
( 3 )
$163.95
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$90.95
—
$117.95
Edelbrock Pro-Flo 4 distributor rotors are designed as direct replacements for the rotor that came with your Pro-Flo 4 ignition system's distributor. When rotors are worn out they can cause the engine to misfire or not start. Edelbrock Pro-Flo 4 distributor rotors will get your vehicle running again.
( 6 )
$18.95
Edelbrock Pro-Flo EFI replacement throttle position sensors are available for their Pro-Flo and Pro-Flo XT EFI systems. When it comes to components to keep your EFI system working smoothly, Edelbrock has you covered.
( 2 )
$53.95
Edelbrock Pro-Flo 4 and Max-Fire Ford 289-347 and 351W distributor gears are specifically designed for Pro-Flo 4 and Max-Fire distributors in engines that are running a steel-core hydraulic roller camshaft. Made from steel, these distributor drive gears are an optional replacement part for the iron gear that comes installed with the distributor. Edelbrock also marks these distributor drive gears with a yellow painted dot for easy identification.
Not Yet Reviewed
$34.95
Edelbrock Pro-Flo EFI replacement intake air temperature sensors are available for their Pro-Flo and Pro-Flo XT EFI systems. When it comes to components to keep your EFI system working smoothly, Edelbrock has you covered.
( 1 )
$40.95
—
$58.95
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,222.95
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$33.95
—
$149.95
Edelbrock Pro-Flo EFI replacement coolant temperature sensors are available for their Pro-Flo and Pro-Flo XT EFI systems. When it comes to components to keep your EFI system working smoothly, Edelbrock has you covered.
( 1 )
$34.95
—
$37.95
Are you experiencing some issues with your Edelbrock Pro-Flo EFI system? Perhaps it's time to replace bad components with new ones. Edelbrock Pro-Flo fuel pump relays can help restore proper function to your Pro-Flo EFI system so that it can perform its optimum best!
Not Yet Reviewed
$31.95
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
—
$2,505.95
Edelbrock Pro-Flo EFI and Max-Fire bronze distributor gears are designed specifically for Pro-Flo 4 and Max-Fire distributors. These drive gears are an optional replacement part for the iron gears that come installed on the Pro-Flo 4 and Max-Fire distributors. The bronze gears are intended for high performance and race applications which require distributor drive gears that conform to the camshaft gear. This type of gear is designed to be sacrificial and should be inspected regularly and replaced when worn.
Not Yet Reviewed
$60.95
Edelbrock Pro-Tuner EFI distributors are designed for use with the Victor and Super Victor Pro-Tuner EFI systems and are also compatible with other aftermarket EFI management systems. They have a magnetic crank pickup and use a Hall-Effect pickup with an LED indicator for the camshaft sensor. Their cam sync pickup can be adjusted manually or with EFI Management software. The cam sync has a 12 in. lead with a 3-prong Weatherpack connector. The crank trigger has an 8 in. lead with a 2-prong Weatherpack connector.
( 2 )
$458.95
Keep your Pro-Flo multi-point EFI systems performing their best with Edelbrock MAP sensors. These Manifold Absolute Pressure sensors are made with high-quality components for durability and dependability, and will have a role in making sure that your engine is fed the right mixture of fuel and air. Hold on to performance by making sure that your ride's computer is getting the right signals with Edelbrock MAP sensors.
( 4 )
$97.95
—
$128.95
Edelbrock replacement oxygen sensors are designed to be direct replacements for the sensors in your Edelbrock air/fuel ratio monitor. These accurate sensors will give you a solid baseline to tune your carburetor, for more power and fuel economy.
( 6 )
$141.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
