Availability
Summit Racing™ GPS speedometer sending units are designed to work with electronic speedometers to provide accurate readings. They require no additional sensor from the transmission to operate the speedometer. These sending units work with most aftermarket speedometers that accept an industry standard 4,000, 8,000, or 16,000 pulses per mile signal, or with any programmable speedometer. The senders include a GPS receiver and a microprocessor with LED status indicator.
( 19 )
$111.99
Intellitronix GPS speedometer senders are designed to connect directly to your electronic speedometer to give you extremely accurate readings! No additional sensor from the transmission is needed to operate your speedometer. They will work with all Intellitronix or any other manufacturer's speedometers that accept an industry standard 4,000, 8,000, or 16,000 pulses per mile signal, or with any programmable speedometer. The senders come complete with a GPS receiver, an on-circuit-board antenna, and a microprocessor with LED status indicator that continuously convert GPS signals into a pulse stream that replicates the output from your mechanical speed sensor, but with GPS accuracy. You won't have anymore inaccurate speedometer readings due to different tire sizes or rear-end gear ratios.
( 79 )
$141.91
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 29 )
$133.00
Optimizing your dash solution to display your vehicle speed is simple with Holley GPS digital USB modules. The 46 in. USB cables allow you to install the digital display unit virtually anywhere on the dashboard—without the need for external sensor information. Eliminate old, noisy mechanical speedometer cables and step up to Holley's accurate GPS speedometer output module. Additional information: * USB connection for user-friendly, plug-and-play installation * Magnetic base provides for multiple mounting solutions * 10 Hz refresh rate for ultra-accurate, real-time speedometer output * Requires clear line-of-sight with the sky for satellite acquisition * Can only be used with 553-106 or 553-109 digital dashes
Not Yet Reviewed
$106.95
Dakota Digital pressure modules allow you to display an additional pressure reading within your RTX, HDX, VHX, and VFD3 (rev G) gauges. These BIM-03-2 modules are designed for Solid State pressure senders, providing you phenomenal accuracy. Pressure inputs: * Pressure (generic fluid or air) * Fuel pressure * Air pressure * Boost/vacuum * NOS pressure
( 5 )
$90.25
Tanks Inc. reed switch fuel level senders provide level information via a series of reed switches positioned inside of the sealed level tube, while an external float with built-in magnets trigger the reed relays to generate an ohm resistance value. With no moving mechanical parts other than the float, Tanks' reed switch fuel level senders are extremely durable and reliable, and they provide flexibility of installation, even in tanks with baffles while reducing slosh fluctuation. They are available for standard aftermarket, VDO, GM, and early Ford and Mopar gauges. Select the reed switch sending unit designed for your gauges. Additional features: * SAE 5-bolt mounting pattern * Full 304 stainless steel construction * Durable NBR float * Compatible with gas, diesel, hydraulic fluids, black water, and grey water * Gasket and mounting screws are included
( 3 )
$52.99
—
$57.99
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$89.00
Dakota Digital BIM Series gives you more info without more gauges. Their wideband air/fuel modules are easy to install--no cutting holes or installing pillars or pods. They allow you to display the reading from almost any aftermarket wide band controller system and are user-programmable to display in either air/fuel ratio or lambda. Get additional gauge information without the gauge, thanks to Dakota Digital BIM wideband air/fuel modules.
( 2 )
$123.50
American Autowire alternator warning light sending units can be used to trigger an in-dash warning light when the charging systems voltage drops below 11 bolts. This makes it the perfect solution to control a dash indicator light when installing a one-wire alternator, or simple as a piece of mind in addition to a voltmeter. Don't get stuck with a dead system, get warned beforehand with these sending units!
( 4 )
$43.70
Nitrous Express nitrous pressure sensors have a working pressure window of 0-1,600 psi. They work in conjunction with the Max 5 progressive nitrous controller (sold separately) to monitor and datalog N2O pressure. Additional product details: * They allow the Max 5 unit to control when the bottle heater is to turn on and off. You can set the on/off PSI in the Max 5 to send an activation signal to your bottle heater at any pressure you command. * They allow the Max 5 to keep the nitrous system from engaging if bottle pressure is too high or too low (by user adjustable high/low limits). * Includes 3-wire pigtail harness * 0-5 V
( 1 )
$164.04
—
$206.84
Dakota Digital RGB lighting control boxes allow you to control vehicle accent lighting, suitable to match a Dakota Digital instrument system, or completely standalone. These modules enable you to control your own external LED strips, or using a range of models which Dakota Digital offers. From underdash lighting to door accents, it's the perfect solution to creating a cohesive theme from the dash to the custom interior. Additional details: * Output designed for 12 V DC RGB LEDs, common anode configuration * BIM-RGB can be synced to match other Dakota Digital HDX/RTX/GRFX color schemes * Can also be used as a standalone RGB LED controller * Outputs for up to four strings of LEDs * Each of the four outputs can drive up to 32 in. of LEDs up to 1.85 amps * Optional switch inputs to support custom installations * 31 LED color selections to choose from * Programmable via Bluetooth with the Dakota Digital Accessory app * Selectable Music Mode flashes the LEDs to the beat of the music
Not Yet Reviewed
$133.00
Manufacturer Rebate
The AutoMeter AirDrive system is capable of broadcasting two additional analog sensor inputs to deliver information not found on your vehicle's data bus. Add a pressure sensor to your engine to monitor your engine's life with the AirDrive pressure sensor. These sending units can gauge fuel pressure, oil pressure, boost, and more.
( 1 )
$136.99
On Sale
FUELAB offers replacement fuel level sending units to ensure accurate readings on your dashboard fuel gauge. These important accessories can be added to your FUELAB Quick Service Surge Tank (QSST) or your existing fuel cell surge tank. Additional details: * 8 in. depth * 0 Ohms empty, 90 Ohms full * Fits most aftermarket and OEM gauges * Constructed from high-quality materials for reliability and longevity * Electrical sending unit
Not Yet Reviewed
$100.00
$90.00
Manufacturer Rebate
AutoMeter's new state of the art AirDrive module provides a plug-and-play solution that wirelessly transmits data through a secure WiFi network from your vehicle to award-winning AirDrive gauges. You can program configurable colors, warning points, and peak recall functions through AutoMeter's free AirDrive smartphone app. Fast installation is as simple as plugging the control module into the vehicle's OBDII port, mounting and powering gauges, and connecting to the mobile app—eliminating any fear of voiding factory warranties on your new vehicle. The AirDrive system is capable of broadcasting two additional analog sensor inputs to deliver information not found on your vehicle's data bus. Take plug-and-play performance to the next level with the AutoMeter AirDrive system. (Works with most 1996 and newer OBDII vehicles.)
( 1 )
$57.99
Dakota Digital Odyssey Series I instruments offer a high-brightness, non-glare, vacuum fluorescent display for excellent daytime visibility and a lifetime of trouble-free use. These gauges provide the accuracy and performance that you've come to expect from Dakota Digital. They're available in a variety of sizes and gauge types, such as oil pressure, water and transmission temperature, voltmeter, clock, boost/vacuum, and fuel level. Additional features include: * Choice of either teal or blue display * Choice of either satin or chrome bezel * Machined aluminum bezel and housing
( 2 )
$351.50
—
$418.00
If you have added the modern convenience of an ididit push-to-start ignition system to your vehicle and have a low-voltage tach signal, you will also need an ididit push-to-start tach adapter. The addition of these adapters will provide the proper information for your PTS ignition system to operate as designed.
Not Yet Reviewed
$19.00
Banks Power thermocouple module kits allow for better management of engine performance by providing critical data on combustion temperatures, which can help optimize power delivery and efficiency. They are designed to connect to your iDash to add four temperature inputs per module, enabling comprehensive monitoring of critical engine temperatures for improved performance, reliability, and safety in diesel vehicles. Each channel can be configured to any temperature parameter, and the K-type thermocouple sensor can read any temperature, including EGTs as hot as 1800 degrees F. Key benefits include their modular, daisy-chainable design for expanded sensor capabilities, the ability to configure each of the channels for various temperature parameters, and their seamless integration with other Banks sensor modules and devices. Additional notes: * Connects in-line with Banks Derringer and other sensor modules for easy connectivity * Daisy chain up to six thermocouple modules and six analog sensor modules per system, allowing you to add over 48 new sensors to your Banks iDash DataMonster or SuperGauge (iDash DataMonster and SuperGauge (sold separately) * B-Bus starter kit (sold separately) required except for customers with a Derringer or other B-Bus module already installed * Does not include mounting bracket (available separately) * BanksBus compatible receiver for 2-pin K-type thermocouples
Not Yet Reviewed
$265.00
Banks Power iDash 1.8 DataMonster and Super Gauge thermocouples are plug-and-play accessories for the Banks 4-CH thermocouple module (sold separately). This K-type sending unit with 1/8 in. NPT compression fitting is suitable for EGT or other temperature readings. Additional features: * 0-1,800 degrees F temperature range * Adjustable insertion depth of up to 7/8 in. * Thread-in sender attachment style * 6 ft. 5 in. cable length
( 1 )
$54.00
REDARC tank level sensors enable you to know exactly how full or empty your water, fuel, or wastewater tanks are. The sensors are specifically tested to be compatible for use with RedVision and TVMS Rogue Control and Distribution Module (TVMS1240). Once wired to the TVMS Rogue, the water tank sensor can be configured via the REDARC Configurator App and monitored via the RedVision App and Display. Made from FDA approved materials, the sensors allow you to accurately measure and monitor tank fluid levels, providing essential information for your caravan, camper van, or camper trailer. They're available in different lengths (reach). Additional details: * Perfect for use in water, fuel, and wastewater * Tested for use with TVMS Rogue * Utilizing magnetic field to control a reed on-off switch * Made of 316 stainless steel * Simple and strong structure * Advanced corrosion resistance * Vibration-resistant
Not Yet Reviewed
$95.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
