Availability
Showing In Stock Items. Show All 18 Items.
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 26 )
$133.00
One Holley EFI gauge module is required per set of CAN gauges. These plug-and-play gauge modules feature a stereo-style connector and pre-pinned ECU wire.
( 4 )
$149.95
Want more info and not more gauges? Dakota Digital BIM temperature modules will allow you to display additional temperature readings without additional gauges! These units utilize ground isolated senders for an easy install, without the headache of engine grounding, and the modules will display either Fahrenheit or Celsius, depending on the setting selected by your gauge cluster. Getting more data is easier with Dakota Digital BIM temperature modules.
( 3 )
$90.25
Save time, sensors, and wiring with Classic Instruments' Zeus-Link all -inclusive gauge interface modules. They will read vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. These units are offered in several styles for connection to a GM OBDII port, Holley Sniper ECU and other Holley ECUs, or a Holley Sniper II ECU. Choose the correct module for your application. Additional features of Zeus-Link modules: * System queries vehicle upon installation to determine what list of parameters can be obtained from the vehicle and used as inputs to gauges * Spaces for six standard gauges: speedometer, tachometer, fuel, oil, volt, temperature, and two auxiliary gauges of the customer's choosing * All instruments can be driven traditionally through proper senders if vehicle ECU does not support an output the driver wants to monitor * Set up and managed all through an app available on the App Store or Google Play * The app is used to configure by choosing which gauges a customer has in the dash and how each gauge gets its signal * The app has a virtual gauge screen, aligning with the dash instruments * The app has easy diagnostics, displays values being received by Zeus-Link and will allow user to cycle gauges to predetermined positions, to verify and correct outputs and wiring * Warning and check engine light outputs on the Zeus-Link and external contacts to light a dash light * Dash light connection * All gauge connections to Zeus-Link (power, ground, signal, dash lights) * Additional resistor dongle available if needed to use multiple Holley CAN devices on the same harness * Harness plugs direct into Zeus-Link and then to Holley ECU or OBD * Holley harness has additional Holley ECU connector for other devices * On-board diagnostic lights give status of power, BLE, and data on the circuit board for Zeus-Link * Pass-through CAN port connection for other CAN devices * Compatible with all Classic Instruments sending units and gauges
( 1 )
$399.95
Unlock the power of OBD-II the easiest way possible with AutoMeter DashLink 2.0 modules! They turn your Apple iOS or Android-enabled device into an advanced display and monitoring system—allowing you to capitalize on AutoMeter's years of instrumentation and data acquisition expertise. You're in control and in-the-know about what is going on with your vehicle. Key features include: * AutoMeter DashLink 2.0 modules are less expensive than other OBD-II monitors and provide free software updates * DashLink 2.0 retains all the same great features as the original DashLink system, but provides a clean, simplified, more refined design for the user * Links to Facebook to post results * User-selectable background colors * 64-bit compatible (Android) * Enhanced PIDs * GPS track mapping line coloration by user-selectable PID (instantaneous MPG, HP/TQ, pedal position, etc.) * Alarms and alerts, with sound when user-set conditions are met * Automatic logging when user-selected conditions are met (pedal position above 50 percent, MAP above 60 kPa, etc.)
( 6 )
$171.99
AutoMeter extension modules are designed to extend the wiring length of the thermocouple of any incandescent backlit AutoMeter pyrometer/EGT gauge up to 75 ft., without any loss of accuracy or response. These modules are great for use in rear engine applications, overhead console mounts, or any setup where the thermocouple wiring supplied with your pyrometer or EGT gauge is too short to successfully complete the installation.
( 2 )
$102.99
Enjoy secure Wi-Fi connectivity to your smartphone or tablet devices from your vehicle with AutoMeter's AirDrive Wi-Fi OBD-II modules and AutoMeter's AirDrive gauges (sold separately). These modules can program configurable colors, warning points, and peak recall functions through AutoMeter's free AirDrive smartphone app. Installation is a breeze; simply plug the Wi-Fi OBD-II module into your vehicle's OBD II port—mounting and powering gauges, and connecting the mobile app … without fear of voiding factory warranties on your vehicle. These AirDrive systems are capable of broadcasting two additional analog sensor inputs to deliver information; and they can support up to three gauges.
( 1 )
$218.99
Dakota Digital once again raises the bar for aftermarket instrumentation with their RTX control boxes! These gauge control modules are designed to receive input from various sensors and sends signals to your gauge instruments. The RTX Retrotech control box is for use with Dakota Digital's Retrotech digital instrument system—which represents the latest electronic dashboard technology for the street rodder, car, and truck enthusiast alike. This RTX system combines modern digital electronics with a traditional look to give the driver up-to-date and accurate information on the operation of his or her vehicle. Once the gauge display panel (sold separately) is in place, simply mount the RTX control box within reach of the supplied display cable (approximately 3 feet). Be sure to choose a mounting location that will allow access to wire all of the inputs on either side of the control box. The RTX control box can be mounted via double-sided tape, hook-and-loop fasteners, or screws in the two tabs on the control box for securing it under the dash for the ultimate clean installation. All the connections on the control box are clearly labeled to provide you with an easy, straight-forward installation. Some key features of the RTX Retrotech control boxes: * Retrotech control box provides status of different functions for accurate readings for DIM, engine, brake, fuel pressure, temperature, speed—and more! * Auxiliary input—BIM I/O port allows considerable expansion, more readings and data displayed * Simple outputs—proprietary cables connect directly to instrument and clock displays * Integrated terminal strips—easily connects existing wiring supplied sensor harnesses for a clean finished appearance * Bluetooth connectivity—available app offers simplified calibration and setup, for your Android or Apple iOS * Warning inputs—two, rpm and user-definable, for connection to an external light or rely
Not Yet Reviewed
$541.45
AutoMeter DashControl OBDII gauge controllers are, to date, the most advanced way of displaying vehicle data. There's nothing to install, no programing, no changes to your vehicle in any way. Simply plug the unit into your vehicle's OBD-II port—and it turns your factory dashboard display into a fully customizable gauge canvas. See all of the data your vehicle has to offer on your driver information center, heads-up display, or radio. You can also set up visual and audible alerts for any condition or vehicle value. DashControl controllers include two auxiliary 0-5 V inputs, so you can add aftermarket sensors for other values you'd like to monitor. Additional features of Auto Meter DashControl OBDII gauge controllers: * Compatible with vehicles equipped with or without HUD (heads-up display) * Control your NPP/Bi-mode exhaust with your cruise control switch * See boost, fuel pressure, knock retard, and much more using your factory displays * 0-60, 1/8th mile, 1/4 mile, 1/2 mile, and one mile elapsed time recorder * Calculate horsepower and torque * Selectable display location * User upgradeable via free downloads * Zero permanent modifications to vehicle; just unplug and resume * 100 percent warranty friendly—completely reversible by simply unplugging the module * Low power sleep mode ensures your battery will not be drained if DashControl is left in the vehicle
( 2 )
$299.99
—
$309.99
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These 4-ft. extension harnesses are designed for use with HalTech CAN wideband controllers (LSU 4.9). They're made from high-quality materials to ensure proper connection and long-lasting performance.
Not Yet Reviewed
$52.00
If the cables or sensors for your AEM Performance electronics gauge become damaged, AEM offers sensors and replacement cables for their digital and analog style gauges. AEM Electronics Classic Wideband Bosch 4.2 sensor harnesses are the correct-fit replacements for your AEM digital or analog UEGO gauges. They will fit and work just like the originals they are replacing.
Not Yet Reviewed
$32.65
These AutoMeter nitrous pressure sending unit extension harnesses are designed for nitrous bottles that are mounted in the trunk or back of the car.
( 1 )
$52.99
Racepak EFI V-Net Interface module cables are used to convert the serial data stream for an AEM EMS unit into a CAN bus data stream compatible with the RacePak V-Net System. Data from the module is then available for use with the full range of RacePak V-Net devices including on board displays, real time telemetry, and data logging applications.
Not Yet Reviewed
$389.95
Holley EFI digital dash replacement wiring harnesses keep your gauge panel operating at full capacity. The harnesses are available in terminated or unterminated style—and in individual sections and components, so you can replace only what's needed. Maintain peak performance from your Holley digital dash with replacement wiring designed specifically for the modules.
( 1 )
$225.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
