Gaskets & Seals
Availability
From intake to exhaust, gaskets are always at the center of the action, providing the positive, leak-free seal your vehicle’s vital systems require to run at peak efficiency....
From intake to exhaust, gaskets are always at the center of the action, providing the positive, leak-free seal your vehicle’s vital systems require to run at peak efficiency. We have the automotive gaskets and seals for your daily driver or dedicated race car in individual pieces that are perfect for general maintenance or full sets with every gasket and seal you need for a complete engine rebuild. Choose from factory-replacement materials like cork and rubber, or high-tech gaskets made from multi-layer steel, dead-soft aluminum, copper, and more—all designed to withstand extreme heat and pressure.
From intake to exhaust, gaskets are always at the center of the action, providing the positive, leak-free seal your vehicle’s vital systems require to run at peak efficiency. We have the automotive gaskets and seals for your daily driver or dedicated race car in individual pieces that are perfect for general maintenance or full sets with every gasket and seal you need for a complete engine rebuild. Choose from factory-replacement materials like cork and rubber, or high-tech gaskets made from multi-layer steel, dead-soft aluminum, copper, and more—all designed to withstand extreme heat and pressure.
Summit Bucks
ACDelco GM Genuine Parts vacuum pump O-rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles, so you know the fit and function will be perfect.
Not Yet Reviewed
$5.99
Spicer Drivetrain Products locking hub components offer everything needed to return your locking hub system to full operation. From seals and retaining rings to drive hubs and cover plates, these high-quality components are made to factory tolerances to keep you on the road of off the beaten trail for miles to come.
( 4 )
$3.99
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 253 )
$7.99
—
$101.99
Certain engines, such as small block and big block Chevys, can produce high-vacuum or blowout conditions that can be big problems for many valve cover gaskets. Fel-Pro Performance CorkLam gaskets are designed to deal with those challenges. They have a metal core for extra strength, with a special cork-and-rubber compound bonded to both sides. This produces tough gaskets that can deal with problem engines, while also providing a little extra clearance between the valve cover and the valvetrain.
( 259 )
$42.99
—
$60.99
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$50.99
On Sale
Mr. Gasket has two different oil pan gasket sets for your needs: Standard and Ultra-Seal. For stock rebuilds, the standard gaskets are just fine, but for high performance applications, the Ultra-Seals are where it's at. The Ultra-Seal oil pan gaskets are designed for today's performance engines that create excessive amounts of vacuum and pressure in the oil pan. They're constructed from a fiber material that features excellent tensile strength and superior blowout resistance.
( 26 )
$74.25
$26.74
—
$83.19
Sealing valve covers can often be a big challenge, but trust Trick Flow® to get that one handled. Trick Flow® valve cover gaskets are one-piece designs made to eliminate potential leak paths and they have specially chosen high-temperature coatings to prevent leakage. The sealing itself is done with a reliable, temperature-resistant composition. Some gaskets have a tough steel core that gives extra rigidity to resist pressure and vacuum. On top of that, these gaskets are extra-thick to resist crushing. That also gives you a little extra clearance between the valvetrain and the valve cover.
( 9 )
$34.99
—
$57.99
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$57.99
On Sale
Mr. Gasket's Ultra-Seal gaskets are designed for today's performance engines, which can create excessive amounts of vacuum and pressure in the oil pan. They're constructed from a cellulose/nitrile material that features excellent tensile strength and superior blowout resistance, and their black latex coating conforms to minor sealing-surface irregularities for a better seal.
( 7 )
$69.29
$48.59
—
$77.25
Peterson Fluid Systems carries quality engine seals from Tri-Tec. These rear main seals are designed for engines running crankcase vacuum—and ensure the highest vacuum levels. Peterson engine seals offer great benefits to dry sump applications.
Not Yet Reviewed
$89.99
—
$136.99
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Now Fel-Pro has developed these PermaDryPlus valve cover gaskets with SpeedFit technology. These gaskets replace the need for RTV and can significantly speed up your install. No more waiting for the RTV to cure and hoping you didn't use too much or too little--- just install, torque to spec and move on to the next job!
Not Yet Reviewed
$142.99
With the unique top plate of Weiand's Hi-Ram and Tunnel-Ram intake manifold, it's critical that you use the correct gasket to reduce the risk of a vacuum leak between the top and the runner section. These direct-fit replacements are available for a variety of year/make, engine, and intake model applications. They're cut from factory-style materials and specs to ensure a precise fit and optimum performance.
( 11 )
$17.66
—
$18.12
Crown Automotive intake manifold gaskets and seals secure your intake to your engine. A leaky gasket can allow air to be sucked in—resulting in a vacuum leak, poor engine performance, or coolant seeping into the engine and contaminating the engine oil. These high-quality intake gaskets are manufactured using a variety of materials, such as steel, silicone, paper/cork, and rubber/steel. They are available for specific makes and models. Match your vehicle to the correct intake manifold gasket for a direct fit.
( 2 )
$4.99
—
$34.99
BBK Mustang 5.0 factory manifold upper plenum gaskets are quality replacement EFI intake gaskets for Ford small block applications using the BBK intake plenum spacer and a factory Ford intake manifold. They are designed to replace the worn gaskets between the upper and lower manifolds to create an airtight seal and prevent erratic idle if a vacuum leak is present.
Not Yet Reviewed
$26.99
Crown Automotive throttle body gaskets are needed for the replacement of gaskets that no longer seal properly. If yours are bad, you may have idle problems, because the vacuum present in the throttle body regulates idle. Failed gaskets will require replacement. Choose Crown throttle body gaskets to restore performance.
Not Yet Reviewed
$1.99
—
$13.99
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 221 )
$14.95
—
$159.95
Use these Standard Motor Products EGR valve mounting gaskets when replacing those old malfunctioning EGR valves. They are made to meet or exceed OEM specifications and are available for a variety of domestic and foreign applications.
( 2 )
$1.99
Fel-Pro rear main seals are ideal for stock rebuilds or street driven cars and trucks. These OEM-style replacement seals are not intended for race applications. They're available in a variety of materials and configurations for fitment on specific vehicles and engine families.
( 167 )
$22.99
OER firewall grommets allow you to pass wires, pipe, and hose from the inside of your vehicle through to your engine compartment neatly and safely. Available in various shapes and sizes of quality rubber, OER grommets are designed to meet your plumbing and wiring needs with tight, leak-free seals.
( 7 )
$6.99
Regardless of what application you're trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific task. No other gasket distributor offers their application-engineered approach to sealing an engine. Most Mahle Original valve cover gaskets come as complete sets, which contain the valve cover gasket(s), spark plug tube seals when required, and any grommets needed to remove and replace the valve cover. One set does both valve covers on V6 and V8 engines. On some popular engines, valve cover gaskets are sold individually. When sold individually, tube seals and grommets are not included. Over 700 models are available for vehicles from the 1940s and up. Features include: * No joints mean increased durability * Sealants are not required * Compression limiters prevent over-tightening * No torque loss or shrinkage
( 132 )
$114.99
SCE AccuSeal E full engine gasket sets are an economical gasket solution for engine builders; they include all gaskets for your rebuild, minus the valve seats. They feature extra-thick cork valve cover gaskets for valvetrain clearance issues. Extra-thick intake gaskets are also available to provide the correct sealing answers to professional rebuilding questions. SCE AccuSeal E full engine gasket sets offer performance plus economy in one! These gasket sets are made to hold up under high temperatures and pressures and are constructed from premium materials.
Not Yet Reviewed
$298.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
