Availability
Showing In Stock Items. Show All 115 Items.
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 635 )
$48.99
—
$82.99
Most Fel-Pro Performance intake manifold gaskets have Printoseal construction, which puts beads of special elastomers around the ports for extra sealing power. They also feature a non-metallic, rubber-fiber base material that resists gasoline and alcohol—and they allow engine builders to precision-trim around the intake ports. These replacement gaskets are available in a variety of materials, thicknesses, and port configurations. Order the set recommended for your vehicle year/make and engine application.
( 1291 )
$29.99
—
$36.99
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 540 )
$71.99
—
$125.99
Moroso Perm-Align valve cover gaskets are manufactured from 30-durometer rubber, which is molded over and vulcanized to a rigid steel frame. They won't leak, blow out, or get sucked in, the way stock or inferior-quality aftermarket gaskets can. These gaskets feature superior-quality rubber and steel, which outlast cork-and-rubber composite designs to provide years of dependable service, especially if you frequently have to remove and reinstall the valve covers.
( 194 )
$54.99
—
$504.99
Fel-Pro offers fuel pump gaskets for thousands of applications. These economical replacements are available in a variety shapes and materials. Order the model recommended for your vehicle and engine family.
( 93 )
$3.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 541 )
$87.95
—
$235.73
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 448 )
$30.95
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 541 )
$26.99
—
$33.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 22 )
$91.99
—
$143.99
Sooner or later, you're going to need valve cover gaskets. Our Summit Racing™ valve cover gaskets are ideal. They're constructed from quality materials and so reasonably priced, why not stock up? Order the pair of Summit Racing™ valve cover gaskets designed to fit your application.
( 356 )
$43.99
Fel-Pro water neck gaskets are available for hundreds of applications, including most engine coolant outlets and thermostat housings. These inexpensive seals are offered in a variety of materials and configurations. Avoid unwanted leaks. Order the gaskets recommended for your vehicle and engine family.
( 270 )
$2.99
—
$3.99
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 252 )
$17.99
Cometic Street Pro bottom-end gasket sets gather all of the necessary parts in one handy kit, tailored to specific years/makes/models. Rebuilding or servicing an engine can be quite an ordeal--trying to locate all of the correct gaskets, seals, washers, and O-rings for the many sections. If the fit isn't perfect, you know the messy results.There's no need for you to hunt down replacement seals for oil pans, water pumps, pickup tubes, cranks, drains, timing covers, retainers... you get the picture. Match up your vehicle with the corresponding Cometic Street Pro bottom-end gasket set and order today!
( 2 )
$74.53
—
$81.99
Fel-Pro intake manifold gaskets are designed to be replacements for stock-type intake gaskets. This means they're ideal for stock rebuilds, as well as mild performance engines. The seals are available in a variety of configurations for fitment on hundreds of engine applications.
( 497 )
$15.99
—
$19.99
Mr. Gasket Ultra-Seal valve cover gaskets may be the most advanced, highly tested, and real-world proven gaskets on the market today. They're made from high-density cork-and-rubber gasket material. This construction means that they are non-shrink and non-stick, don't have to be re-torqued, and can be reused. Their extra thickness also adds a little clearance between the valvetrain and the valve cover.
( 150 )
$44.08
Fel-Pro Performance oil pan gaskets offer three types of construction. Some are made from Felcoid/Plus, a special fiber core with a latex rubber coating. For applications where a tougher seal is needed, they have solid steel core gaskets wrapped with rubber-coated fiber facing material. And for newer engines, there are one-piece molded silicone-rubber gaskets specifically designed to handle their special needs. Some of these gaskets have a solid steel core, while others have a rigid carrier-type design. Fel-Pro oil pan gaskets come with an anti-stick treatment for easy removal. Order the replacements recommended for your year/make and engine family.
( 411 )
$21.99
Keep your oil where it belongs with SCE AccuSeal E rear main seals! These seals provide the precision fit that you want at a price that you can afford, and the durability to last. SCE AccuSeal E rear main seals prevent your oil from escaping and leaking onto the track and covering your transmission.
( 11 )
$29.62
Certain engines, such as small block and big block Chevys, can produce high-vacuum or blowout conditions that can be big problems for many valve cover gaskets. Fel-Pro Performance CorkLam gaskets are designed to deal with those challenges. They have a metal core for extra strength, with a special cork-and-rubber compound bonded to both sides. This produces tough gaskets that can deal with problem engines, while also providing a little extra clearance between the valve cover and the valvetrain.
( 258 )
$45.99
Mr. Gasket head gaskets are ideal for stock rebuilds and mild performance applications. They're designed to offer greater sealing characteristics than OEM, plus longer life--and they're more affordable, too!
( 46 )
$44.06
Cometic valve cover gaskets are made from aramid fiber. This is a premium high-temperature, high-density, creep-resistant material that is fuel-resistant and asbestos-free. These gaskets require no retorquing or additional sealant. If you want a dependable seal, go with Cometic Gasket valve cover gaskets.
( 68 )
$22.80
—
$34.23
Cometic Gasket Street Pro top-end gasket kits bring race-proven MLS technology to the budget-minded hot rod guy or gal. The multi-layer steel gasket is their commitment to cutting-edge technology and producing superior-quality gaskets. Street Pro gasket kits are constructed from multiple layers of stainless steel for its strength, along with excellent rebound and corrosion-resistant characteristics. The outer layers are coated with a rubber-based material to create a superior, heat-resistant seal that can withstand extreme cylinder pressures. Cometic gaskets are ideal for everything from aluminum heads to cast iron or aluminum blocks. Street Pro gaskets offer top-end quality that you can afford.
( 6 )
$215.94
—
$278.31
Milodon rugged crushproof premium oil pan gaskets can be used with gasoline, alcohol, and race fuels. They won't crush, split, shrink, or squeeze out like other gaskets. What's more, Milodon says you couldn't tear them, even if you tried.
( 129 )
$31.95
Mr. Gasket Ultra-Seal gasket sets are made of a cellulose/nitrile material that is less compressible for excellent sealing and durability. This material has an anti-stick coating, plus a silicone bead around each intake port, except where noted, for a tight, leakproof seal. These gaskets are the perfect solution for intake-sealing problems associated with the small sealing areas between ports, and the different expansion rates of intake manifolds and cylinder heads. The choice of champions, these sets come complete with all necessary seals and can be trimmed to fit modified ports where needed.
( 72 )
$49.95
Fel-Pro air cleaner gaskets are designed to fit between your air cleaner and carburetor or TBI. They create a positive seal that will help prevent unfiltered air from entering your engine. Order the replacement gasket recommended for your vehicle and engine application.
( 62 )
$2.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
