Availability
Showing In Stock Items. Show All 120 Items.
Ford Performance Parts 2018-19 5.0L Coyote head changing kits provide the proper seal for the best performance. These unique multi-layer steel gaskets include high-strength, torque-to-yield 12mm head bolts. Choose genuine Ford Performance parts to service your vehicle for optimal operation.
( 2 )
$238.99
Ford Performance Parts cylinder head changing kits include multi-layer steel head gaskets and high-strength torque-to-yield head bolts. They make changing the cylinder heads on your Ford engine significantly easier and are highly recommended when installing Ford Performance Parts cylinder heads.
( 19 )
$117.99
—
$214.99
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$18.99
—
$64.99
When installing new headers or putting your headers back on, you'll need some good gaskets. Ford Performance Parts replacement header gaskets are made to stock specifications and tolerances, so you're sure to get a good seal.
( 4 )
$84.99
Sealing valve covers can often be a big challenge, but trust Trick Flow® to get that one handled. Trick Flow® valve cover gaskets are one-piece designs made to eliminate potential leak paths and they have specially chosen high-temperature coatings to prevent leakage. The sealing itself is done with a reliable, temperature-resistant composition. Some gaskets have a tough steel core that gives extra rigidity to resist pressure and vacuum. On top of that, these gaskets are extra-thick to resist crushing. That also gives you a little extra clearance between the valvetrain and the valve cover.
( 8 )
$57.99
Ford Performance Parts 5.0L Coyote oil pump installation kits include timing cover gaskets and seals, oil pan gaskets, harmonic damper bolt, and damper seal. Ensure leak-free performance with factory seals when installing an oil pump on your 2011-17 5.0L Coyote Mustang GT or F-150 engine.
( 1 )
$139.99
Cometic valve cover gaskets are made from aramid fiber. This is a premium high-temperature, high-density, creep-resistant material that is fuel-resistant and asbestos-free. These gaskets require no retorquing or additional sealant. If you want a dependable seal, go with Cometic Gasket valve cover gaskets.
( 69 )
$49.43
—
$114.54
Fel-Pro Performance PermaTorque MLS head gaskets are proven to handle big power any way you can make it. They're designed to maintain contact pressure between the cylinder head and block during the dynamics of engine operation. PermaTorque gaskets can seal combustion, oil, and coolant despite extreme horizontal and vertical motion between the cylinder head and block. Engines with open deck surfaces, numerous cooling passages, and relatively few head fasteners will greatly benefit from Fel-Pro performance PermaTorque MLS head gaskets. For replacement or upgrade, order the model recommended for your specific vehicle and engine application.
( 169 )
$54.99
—
$58.99
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 540 )
$173.99
—
$283.99
BBK reinforced header gaskets are made from the highest quality materials available. They feature a durable steel wire core to eliminate heat cracking and exhaust leaks, and provide a great seal. They're designed for use with your BBK headers, so you can depend on these gaskets to go the extra mile.
( 42 )
$49.99
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like /Trick Flow® by Cometic MLS exhaust gaskets. Constructed from multiple layers of strong stainless steel, these gaskets have excellent rebound ability and corrosion-resistant characteristics. The outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. These gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 23 )
$38.99
—
$52.99
Remflex exhaust header gasket sets feature 100 percent flexible graphite construction that's effective up to 3,000 degrees F, far exceeding any vehicle's exhaust system temperature. They will rebound 30 percent when tightened, creating an optimum seal that eliminates the need for re-torquing. The unique Remflex material has been proven for over three decades in industrial applications, where temperatures routinely exceed 2,000 degrees F. They're designed to crush up to 50 percent, filling uneven header flanges for maximum sealing and eliminating the potential for exhaust leaks. Choose the gasket style and dimensions for your specific exhaust headers.
( 842 )
$36.15
—
$39.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 543 )
$132.74
—
$235.73
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 31 )
$37.33
—
$52.49
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 370 )
$267.99
—
$370.99
The leak stops here! Cometic MLX head gaskets feature a unique integrated "stopper" layer for optimum combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. The MLX head gaskets, like their MLS counterparts, are multi-layer stainless steel for increased strength—and require no sealants or re-torquing. Dozens of models are available; order the MLX head gaskets designed to maximize your engine's power and performance.
( 18 )
$132.74
—
$191.03
National Bearing transmission rear seals are designed to keep dust, dirt and other contaminants out of your transmission gears. They're made from high-grade steel with a special rubber insert to ensure a more secure, leak-proof seal. Protect your investment, with transmission rear seals from National Bearing.
( 1 )
$10.99
—
$12.99
If you're in the process of engine work on your production 5.2L Coyote, Ford Performance Parts 5.2L Coyote Head Changing Kits have your gasket needs covered. Each kit includes two multi-layer steel head gaskets and high strength torque-to-yield 12mm head bolts designed specifically for the 5.2L block.
Not Yet Reviewed
$137.99
Fel-Pro offers transmission pan gaskets for more than 40 types of transmissions. As with so many parts on your vehicle, keeping lubricant sealed in—and contaminants sealed out—are keys to optimum performance. These gaskets are available in different materials and configurations. Order the replacement recommended for your vehicle make and transmission application.
( 128 )
$26.99
—
$28.99
Timken transfer case seals are engineered to provide enhanced endurance and maximum contamination exclusion, while ensuring proper fit, form, and function. These transfer case seals are available in a range of applications to fit various transfer case styles and install easily with basic hand tools. Keep your transfer case well protected from dirt, dust, and other unwanted contaminants with Timken transfer case seals.
( 6 )
$17.99
—
$19.99
Keep your performance engine sealed properly with Summit Racing™ oil pan gaskets. Built from high-quality materials, these gaskets will maintain a leak-free seal for your oil pan.
( 113 )
$23.99
MotoRad has you covered when it comes to your cooling system's sealing needs. MotoRad offers these STAT LOK products in gasket and seal form. The gaskets are designed to reduce installation time and feature an adhesive backing to hold your thermostat securely centered in the counterbore, leaving both of your hands free to align and bolt down the outlet. STAT LOK rubber seals are available for nearly all US and import cars and light trucks. So save time, prevent leaks, and get the job done right with MotoRad STAT LOK engine coolant thermostat gaskets and seals!
( 3 )
$1.99
Cometic Gasket Street Pro top-end gasket kits bring race-proven MLS technology to the budget-minded hot rod guy or gal. The multi-layer steel gasket is their commitment to cutting-edge technology and producing superior-quality gaskets. Street Pro gasket kits are constructed from multiple layers of stainless steel for its strength, along with excellent rebound and corrosion-resistant characteristics. The outer layers are coated with a rubber-based material to create a superior, heat-resistant seal that can withstand extreme cylinder pressures. Cometic gaskets are ideal for everything from aluminum heads to cast iron or aluminum blocks. Street Pro gaskets offer top-end quality that you can afford.
( 6 )
$262.28
—
$464.43
JBA Performance Exhaust offers exhaust header gaskets to aid in the fitment of your JBA exhaust product to fix an exhaust manifold gasket leak—or prevent it from happening in the first place. These premium header flange gaskets feature a steel core laminate construction to ensure a good seal and are available in a variety of gasket applications to be an exact port match with JBA Performance Exhaust headers.
( 16 )
$40.20
—
$45.60
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
